When you exchange IC and Transistor with a heat sink, apply silicon grease on the contact section of the heat sink. Befor applying new silicon grease, remove all the old silicon grease. (Old grease may cause damages to the IC and Transistor.) 20AF45/20AF45C A1-1...
When soldering or unsoldering, completely remove all of the solder from the pins or solder area, and be sure to heat the soldering points with the lead free solder until it melts sufficiently. Recommendations Recommended lead free solder composition is Sn-3.0Ag-0.5Cu. A1-2 20AF45/20AF45C...
W at AC 120 V 60 Hz Per Year kWh/Year Protector Power Fuse Safety Circuit IC Protector(Micro Fuse) Regulation Safety Radiation X-Radiation DHHS Temperature Operation +5oC ~ +40oC Storage -20oC ~ +60oC Operating Humidity Less than 80% RH A3-1 20AF45...
Page 6
V-chip Rating 16: 9 OSD Language English French Spanish Clock and Sleep Timer Max Time 120 Min Timer Step On/Off Timer Program(On Timer / Off Timer / Clock) Wake Up Timer Timer Back-up (at Power Off Mode) more than A3-2 20AF45...
Page 7
CH RTN(Quick View) Sleep RECall(Call) Reset Menu/Enter Mute Exit MTS(Audio Select) Fav.Up Fav.Down 16: 9 Multi Brand Keys CH Up(VCR) CH Down(VCR) Pause/Still TV/VCR(VCR) Play Stop Cable CODE DVD MENU < DVD MENU > DVD CLEAR TOP MENU DVD MENU A3-3 20AF45...
Page 8
Features Auto Degauss Auto Shut Off Canal+ CATV Anti-theft Rental Memory(Last CH) Memory(Last Volume) V-Chip Type USA,Toshiba Type Auto Search CH Allocation Just Clock Function CH Label VM Circuit Full OSD Premiere Comb Filter Lines Auto CH Memory Hotel Lock...
Page 9
Edges / 6 Surfaces Height (cm) 60 (ORION SPEC:46) Container Stuffing Sets/40' container G-17 Cabinet Material Cabinet Cabinet Front PS 94V0 DECABROM Cabinet Rear PS 94V0 DECABROM Non-Halogen Demand Eyelet Demand G-18 Environment Pb-free Soldering Parts Specification(Phase3 : based on RoHS) A3-5 20AF45...
Page 10
GENERAL SPECIFICATIONS CRT Size / Visual Size 20 inch / 508mmV System CRT Type Flat Magnetic Field BV/BH +0.45G/0.18G Color System NTSC Speaker 2 Speaker Position Front Side Size 2 x 4.7 Inch Impedance Sound Output 2.5+2.5 W 10%(Typical) NTSC3.58+4.43 /PAL60Hz Tuning Broadcasting System System M...
Page 11
GENERAL SPECIFICATIONS On Screen Menu Display Menu Type Icon Picture Contrast Brightness Color Tint Sharpness Sound Bass Treble Balance BBE On/Off Stable Sound On/Off Surround On/Off Set Up TV/CATV Auto CH Memory Add/ Delete Option Language CH Label Favorite CH V-Chip Lock On/Off Timer...
Page 12
GENERAL SPECIFICATIONS G-10 Remote Unit RC-GQ Control Glow in Dark Remocon Format Toshiba Remocon Format Toshiba Custom Code TV:40-BF h Power Source Voltage(D.C) UM size x pcs UM-4 x 2 pcs Total Keys Keys Keys Power CH Up CH Down...
Page 13
GENERAL SPECIFICATIONS G-11 Features Auto Degauss Auto Shut Off Canal+ CATV Anti-theft Rental Memory(Last CH) Memory(Last Volume) V-Chip Type Type Auto Search CH Allocation Just Clock Function CH Label VM Circuit Full OSD Premiere Comb Filter Lines Auto CH Memory Hotel Lock Closed Caption Stable Sound...
Page 14
GENERAL SPECIFICATIONS G-13 Interface Switch Front Power System Select Main Power SW Sub Power Channel Up Channel Down Volume Up Volume Down Rear AC/DC TV/CATV Selector Degauss Main Power SW Indicator Power Yes(RED) Stand-by On Timer Terminals Front Video Input = VIDEO2 Audio Input = VIDEO2 RCA x 2 Other Terminal...
Flip up the sides of the Rubber Cap in the direction of the arrow and remove one side of the support. (Refer to Fig. 1-2.) Rubber Cap Support Fig. 1-5 Support Confirm that the Support is securely connected. Fig. 1-2 Put on the Rubber Cap without moving any parts. B1-1 20AF45/20AF45C...
NOTE Do not move the Braided Shield Wire in the vertical direction towards the IC pattern. Blower type IC desoldering machine Braided Shield Wire Soldering Iron IC pattern Fig. 2-4 Fig. 2-2 B2-1 20AF45/20AF45C...
Page 17
Fig. 2-6 Absorb the solder left on the lead using the Braided Shield Wire. (Refer to Fig. 2-7.) NOTE Do not absorb the solder to excess. Soldering Iron Braided Shield Wire Fig. 2-7 B2-2 20AF45/20AF45C...
Press both VOL. DOWN button on the set and Channel button (1) on the remote control for more than 2 seconds. After the finishing of the initializing of shipping, the unit will turn off automatically. The unit will now have the correct DATA for the new MEMORY IC. 20AF45/20AF45C...
VS CORRECTION CR DL Adjust the Focus Volume until picture is distinct. R DRIVE CB PED B DRIVE CR PED R BIAS PARABOLA G BIAS CORNER B BIAS TRAPWZIUM BRIGHT MAX LEVEL BRIGHT CENT SEPARATION1 BRIGHT MIN SEPARATION2 Fig. 1-2 20AF45/20AF45C...
Page 20
Press the VOL. UP/DOWN button on the remote control to adjust it until the L-ch output becomes minimum. The output difference of the between with Filter and without Filter should be more than 25db for both L and R. 20AF45/20AF45C...
Page 21
Place the set in AV mode. Then perform the above adjustments 2~6. Press the TV/VIDEO button on the remote control to set to the CS mode. Then perform the above adjustments 2~4. Press the VOL. UP/DOWN button on the remote control until the color step No. becomes "66". 20AF45/20AF45C...
Page 22
2-16: Confirmation of Fixed Value (Step No.) Please check if the fixed values of the each adjustment items are set correctly referring below. FUNCTION H.VCO AFC GAIN V.SHIFT H.SIZE VS CORRECTION BRI.MAX BRI.MIN CONT.CENT CONT.MIN COL.MAX COL.MIN SHARPNESS CB DL CR DL PARABOLA CORNER TRAPEZIUM 20AF45/20AF45C...
Confirm red and blue color. WEDGE Adjust the slant of the deflection yoke while watching the screen, then tighten the fixing screw. WEDGE POSITION DEFLECTION YOKE Fig. 3-2-b DEFLECTION YOKE SCREW MAGNET SCREW PURITY MAGNETS 6 POLE MAGNETS 4 POLE MAGNETS Fig. 3-1 20AF45/20AF45C...
NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. 20AF45/20AF45C...
CRITICAL FOR SAFETY,USE ONES WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST DANGEREUSES AN POINT DE VUE SECURITE DESCRIBED IN PARTS LIST ONLY WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES 20AF45/20AF45C...
DANGEREUSES AN POINT DE VUE SECURITE THE ALUMI ELECTROLYTIC CAPACITOR MARKED NP CRITICAL FOR SAFETY,USE ONES WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. N’UTILISER QUE CELLS DECRITES DESCRIBED IN PARTS LIST ONLY IS NON POLAR ONE. DANS LA NOMENCLATURE DES PIECES 20AF45/20AF45C...
NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED :POUR UNE PROTECTION CONTINUE LES RISQUES D’INCEIE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST N’UTILISER QUE DES FUSIBLE DE MEME TYPE 6.3A 125V(F501) WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. 20AF45/20AF45C...
OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE DANGEREUSES AN POINT DE VUE SECURITE CRITICAL FOR SAFETY,USE ONES WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. N’UTILISER QUE CELLS DECRITES DESCRIBED IN PARTS LIST ONLY DANS LA NOMENCLATURE DES PIECES AUDIO SIGNAL 20AF45/20AF45C G-10...
DANGEREUSES AN POINT DE VUE SECURITE CRITICAL FOR SAFETY,USE ONES OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. N’UTILISER QUE CELLS DECRITES DESCRIBED IN PARTS LIST ONLY DANS LA NOMENCLATURE DES PIECES 20AF45/20AF45C G-11 G-12...
Page 34
NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED COLOR SIGNAL OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. TUNER VIDEO SIGNAL 20AF45/20AF45C G-13 G-14...
Page 35
OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE CRITICAL FOR SAFETY,USE ONES DANGEREUSES AN POINT DE VUE SECURITE WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. G.SIGNAL DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES B.SIGNAL 20AF45/20AF45C G-15 G-16...
Page 36
15 2V 20µs/div DEFLECTION 4 1V 0.1ms/div 11 0.5V 20µs/div 16 2V 5ms/div CHROMA 12 1V 2µs/div 7 1V 20µs/div 17 20V 5ms/div NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. 20AF45/20AF45C...
22 2V 5ms/div COMB/FILTER/AV 28 200mV 20µs/div 23 2V 5ms/div 21 200V 50µs/div 37 50V 20µs/div 29 200mV 20µs/div 24 2V 5ms/div NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. 20AF45/20AF45C...