Table of Contents
Advertisement
Available languages
Available languages
Setting Up Your Camera
Figure 3
shows the factory set DIP switch settings.
Automatic Gain Control (AGC) and Auto White Balance
Control (AWC) are set ON.
Figure 3
IRIS
LEVEL
PUSH
IRIS
LEVEL
LOCK
V-PH
PWR
+
-
DC 12V
AC 24V
Selecting the Lens
Manual Lens
Set the EE/ME DIP switch on the rear of the camera (see
Figure
3) to EE. Set the AES/AI switch to AES. EE and AES
are the typical settings.
Vari-focal Auto Iris Lens
Vari-focal Auto Iris lenses (Direct Drive [DC] or Video Drive
[VSD]) are connected to the camera via a 4-pin square
socket located at the side of the camera. Set the AES/AI DIP
switch to AI. EE and AI are the typical settings.
To set a different exposure, see
Direct Drive (DC) Lens
1.
Set the VSD/DC switch on the rear of the camera to DC.
Set the AES/AI DIP switch to AI.
Rev 3
Factory Set DIP Switch Settings
VIDEO
L/L
EE
ME
AES
AI
INT
BLC
FL
VSD
AGC
OFF
WB3
WB2
WB1
DC
GND
EE
ME
AES
AI
OFF
BLC
OFF
FL
OFF
AGC
OFF
WB3
OFF
WB2
OFF
WB1
= ON
= OFF
Exposure Mode on page
4
VSD
DC
G-113077-002
01/07
5.
Hide quick links:
Advertisement
Chapters
Table of Contents
