Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Beko WI 1382
Summary of Contents for Beko WI 1382
-
Page 1: Washing Machine
WI 1382 Washing Machine User's Manual Document Number 2820522930/ 210512.1725... - Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1 Your washing machine 5 Selecting a Program and Operating Your Machine Overview ..... . . 4 Technical specifications . -
Page 4: Your Washing Machine
Your washing machine Overview 1- Power cable 5- Adjustable feet 2- Top lid 6- Loading door 3- Control panel 7- Detergent drawer 4- Filter cap 8- Drain hose... -
Page 5: Technical Specifications
Technical specifications WI1382 Models (EN) Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) Electrical input (V/Hz) 230 V / 50Hz Total current (A) Total power (W) 2200 Spin speed (rpm max.) 1200 Stand-by mode power (W) 1.40 Off-mode power (W) 0.20... -
Page 6: Important Safety Instructions
Important safety instructions This section contains safety instructions with the values in the "Technical that will help protect from risk of personal specifications" table. Do not neglect injury or property damage. Failure to to have the grounding installation follow these instructions shall void any made by a qualified electrician. -
Page 7: Children's Safety
used out of its intended use. • The product must only be used for washing and rinsing of laundry that are marked accordingly. • The manufacturer waives any responsibility arisen from incorrect usage or transportation. Children's safety • Electrical products are dangerous for the children. -
Page 8: Installation
Installation Refer to the nearest Authorised Service Removing packaging Agent for installation of the product. To reinforcement make the product ready for use, review Tilt the machine backwards to remove the information in the user manual and the packaging reinforcement. Remove the make sure that the electricity, tap water packaging reinforcement by pulling the supply and water drainage systems are... -
Page 9: Connecting Water Supply
3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P) Keep the transportation safety bolts Ensure that the cold and hot water in a safe place to reuse when the connections are made correctly when washing machine needs to be moved installing the product. -
Page 10: Adjusting The Feet
Please call Beko Spare Part Department. well with an appropriate clamp as not (0845 6004911) and see built-in to come off and leak. -
Page 11: Electrical Connection
Electrical connection need to be replaced an ASTA approved BS1362 fuse of the same rating must Connect the product to a grounded outlet be used. Do not forget to refit the fuse protected by a fuse complying with the cover. In the event of losing the fuse values in the "Technical specifications"... -
Page 12: First Use
First use Transportation of the product Before starting to use the product, make 1. Unplug the product before sure that all preparations are made in transporting it. accordance with the instructions in 2. Remove water drain and water sections "Important safety instructions" supply connections. -
Page 13: Preparation
Preparation Things to be done for energy saving Following information will help you use the product in an ecological and energy- Wash with sensitive, efficient manner. Washing water .short programmes temperature • Operate the product in the highest capacity allowed by the programme you have selected, but do not overload;... -
Page 14: Correct Load Capacity
Correct load capacity The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired. The machine automatically adjusts the amount of water according to the weight of the loaded laundry. Follow the information in the “Programme and consumption table”. -
Page 15: Detergents And Softeners
Detergents and softeners Detergent Drawer Detergent drawer of your washing machine consists of four different compartments for powder main wash detergent, liquid main wash detergent, liquid softener and powder pre-wash detergent. Each of these laundry additives are dispensed automatically in the relevant time during the washing Programme. - Page 16 Particularly the concentrated softeners detergent. Since the bleach may cause must be diluted with warm water; irritation on skin, little amounts must be otherwise, the siphon may get clogged in used and rinsed thoroughly. Do not pour time. bleach directly onto the laundry and do not use it with colour laundry.
-
Page 17: Tips For Efficient Washing
Tips for efficient washing Clothes Light colours and Delicates/ Colors Dark colors whites Woolens/Silks (Recommended (Recommended (Recommended (Recommended temperature temperature temperature range temperature range range based range based based on soiling based on soiling level: on soiling level: on soiling level: level: 40-90C) cold-40C) cold-40C) -
Page 18: Selecting A Program And Operating Your Machine
Selecting a Program and Operating Your Machine Control panel Spin Speed Adjustment Button Display Temperature Adjustment Button Program Selection Knob On/Off Button Time Delaying Button (+/-) Auxiliary Function Buttons Start/Pause/Cancel Button... -
Page 19: Display Symbols
Display symbols Each of these main programs comprise of a complete washing process, including washing, rinsing and, if required, spin c d e cycles. When selecting the program you are going to use, always consider type of fabric, colour, degree of soiling and permissible water temperature. -
Page 20: Additional Programs
Additional programs • Mixed Fabrics You can use this program to wash For special cases, there are also extra cottons and synthetics together. There is programs available: no need to sort them. Additional programs may differ • Intensive according to the model of your You can wash your durable and heavily machine. -
Page 21: Special Programs
Special programs Economy Symbol Shows energy saving programs and For specific applications, select any of the temperature selections. following programs: As “Intensive” and “Hygiene” programs • Rinse are long programs with higher This program is used when you want to temperature selections to ensure hygiene, rinse or starch separately. -
Page 22: Program And Consumption Table
Program and consumption table Auxiliary functions Selectable Programme (°C) temperature range °C Cottons 2.40 1600 • • • • • 90-Cold Cottons 1.70 1600 • • • • • 90-Cold Cottons 0.95 1600 • • • • • 90-Cold Baby&Toddler Clothing •... - Page 23 ** “Cotton eco 40°C and Cotton eco 60°C are the standard programmes.” These programmes are referred to as ‘standard 40°C cotton programme’ and ‘standard 60°C cotton programme’ • : Selectable * : Automatically selected, not cancellable. ** : Energy Label programme (EN 60456 Ed.3) *** If maximum spin speed of your machine is lower, selection may be made until maximum spin speed.
-
Page 24: Auxiliary Functions
Auxiliary functions • Use this function for smaller amounts or slightly soiled laundry. Auxiliary Function Selection Buttons • Extra Rinse When this function (c) is selected, washing and rinsing is performed with plenty of water. “F3” symbol lights up on the display. -
Page 25: Starting The Program
2. Start symbol will fade. The standby symbol and the time delaying symbol Time delay will flash. With the “Time delay” function you can 3. Press time delaying button “-” to delay the program start up to 24 hours. decrease the desired time delay. Setting can be made in intervals of 30 Program duration after 30 minutes minutes. -
Page 26: Changing The Selections After The Program Has Started
Door lock • If the machine is not spinning, the The Door Locked Symbol lights up when program may be in rinse hold mode the loading door is locked. This symbol or the automatic spin correction will flash until the door is allowed to open. system has been activated due to an Do not force the door at this stage. -
Page 27: Ending The Program Through Cancelling
Ending the program through cancelling “Start/Pause/Cancel” button is pressed for 3 seconds to cancel the program. Start symbol will flash during cancellation. After cancellation, the symbol of the corresponding step at which the cancellation was made will remain lit and “End” will appear on the screen. -
Page 28: Maintenance And Cleaning
Maintenance and cleaning Detergent Drawer Remove any powder residue buildup in the drawer. To do this; • Open the hole in the bellow with the aid of a toothpick if it is clogged. Foreign metal substances in your machine can cause rust stains. In such cases: Clean the drum with a stainless steel cleaning agent. -
Page 29: Draining Any Remaining Water And Cleaning The Pump Filter
machine. the filter must be cleaned only after the inside water is cooled down to avoid hazard of scalding. 2- Open the filter cap. The filter cap may be composed of one or two pieces according to the model of your machine. If it is composed of two pieces, press the tab on the filter cap downwards and pull the piece out towards yourself. - Page 30 into their positions and pushing the upper • Place a large container at the end of part of it. the hose. Drain the water off into the container by pulling out the plug at the end of the hose. If the amount of water to be drained off is greater than the volume of the container, replace the plug, pour the water out and then...
-
Page 31: Troubleshooting
Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause / Cancel button for 3 seconds to reset the machine to factory settings. (See "Canceling the programme") Water in the machine. - Page 32 Loading door cannot be opened. • Door lock is activated because of the water level in the machine. >>> Drain the water by running the Pump or Spin programme. • Machine is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.
- Page 33 Machine does not switch to spinning step. • There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum. Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment.
- Page 34 Colour of the clothes faded. • Excessive laundry was loaded in. >>> Do not load the machine in excess. • Detergent in use is damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. •...
- Page 35 Detergent residue in the detergent drawer. • Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in detergent. • Detergent has gotten damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. •...
- Page 36 Laundry remains wet at the end of the programme • Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use recommended amount of detergent. Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment.
-
Page 37: Product Fiche
PRODUCT FICHE Complying Commission Delegated Regulation (EU) No 1061/201 Supplier name or trademark Beko Model name WI1382 Rated capacity (kg) Energy efficiency class Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load 1.389 (kWh) Energy consumption of the standard 60°C cotton programme at partial load... -
Page 38: Built-In Installation
BUILT-IN INSTALLATION BUILT-IN INSTALLATION GUIDE 820 mm 10,4 mm 150,3 mm 2807110175.indd/040211.1720... - Page 42 IF THE CABINET DOOR OPENS TO RIGHT Use 35mm hinge cutting tool IF THE CABINET DOOR OPENS TO LEFT...
- Page 46 To increase height of product order optional part no: 1493...
- Page 51 Otherwise please call the appropriate number above where service can be obtained at a charge. Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line. Tel: 0845 600 4911...
- Page 52 Guarantee Your new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • Repairs necessary as a result of faulty materials, defective components or manufacturing defect.