show mac-address-table interface
show mac-address-table interface
To display the MAC address table information for a specific interface, use the
show mac-address-table interface command.
Syntax Description
type
slot/port
Defaults
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History
Release
12.1(8a)EW
12.2(25)EW
Usage Guidelines
For the MAC address table entries that are used by the routed ports, the routed port name is displayed in
the "vlan" column not the internal VLAN number.
Examples
This example shows how to display MAC address table information for a specific interface:
Switch# show mac-address-table interface fastethernet6/16
Unicast Entries
vlan
-------+---------------+--------+---------------------+--------------------
2
2
2
2
2
2
Multicast Entries
vlan
-------+---------------+-------+-------------------------------------------
2
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-830
show mac-address-table interface type slot/port
Interface type; valid values are ethernet, fastethernet, gigabitethernet, and
tengigabitethernet.
Number of the slot and port.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Added support for the 10-Gigabit Ethernet interface.
mac address
type
0000.0000.0101
dynamic other
0000.0000.0102
dynamic other
0000.0000.0103
dynamic other
0000.0000.0104
dynamic other
0000.0000.0105
dynamic other
0000.0000.0106
dynamic other
mac address
type
ffff.ffff.ffff
system Fa6/16
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
protocols
ports
port
FastEthernet6/16
FastEthernet6/16
FastEthernet6/16
FastEthernet6/16
FastEthernet6/16
FastEthernet6/16
OL-27596 -01