Debug Platform Ip Multicast - Cisco Catalyst 3750-X Command Reference Manual
Cisco ios release 15.2(1)e and later
Hide thumbs
Also See for Catalyst 3750-X:
- Software configuration manual (1438 pages) ,
- Message manual (150 pages) ,
- Getting started manual (22 pages)
Table of Contents
Advertisement
debug platform ip multicast
debug platform ip multicast
Use the debug platform ip multicast privileged EXEC command to enable debugging of IP multicast
routing. Use the no form of this command to disable debugging.
Syntax Description
all
mdb
mdfs-rp-retry
midb
mroute-rp
resources
retry
rpf-throttle
snoop-events
software-forward
swidb-events
vlan-locks
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(53)SE2
Catalyst 3750-X and 3560-X Switch Command Reference
B-56
debug platform ip multicast {all | mdb | mdfs-rp-retry | midb | mroute-rp | resources | retry |
rpf-throttle | snoop-events | software-forward | swidb-events | vlan-locks}
no debug platform ip multicast {all | mdb | mdfs-rp-retry | midb | mroute-rp | resources | retry
| rpf-throttle | snoop-events | software-forward | swidb-events | vlan-locks}
Display all platform IP-multicast event debug messages.
Note
Display IP-multicast debug messages for multicast distributed fast switching
(MDFS) multicast descriptor block (mdb) events.
Display IP-multicast MDFS rendezvous point (RP) retry event debug messages.
Display IP-multicast MDFS multicast interface descriptor block (MIDB) debug
messages.
Display IP-multicast RP event debug messages.
Display IP-multicast hardware resource debug messages.
Display IP-multicast retry processing event debug messages.
Display IP-multicast reverse path forwarding (RPF) throttle event debug
messages.
Display IP-multicast IGMP snooping event debug messages.
Display IP-multicast software forwarding event debug messages.
Display IP-multicast MDFS software interface descriptor block (swidb) or
global event debug messages.
Display IP-multicast VLAN lock and unlock event debug messages.
Modification
This command was introduced.
Appendix B
Using this command can degrade the performance of the switch.
Catalyst 3750-X and 3560-X Switch Debug Commands
OL-29704-01
Advertisement
Table of Contents
