Table of Contents
Advertisement
Available languages
Available languages
English
1
Installation
NOTE:
cannot run the Setup CD-ROM, refer to this Quick Installation Guide .
1.
Power down all your network devices, including your computer(s)
and the Modem Router . If you currently use a modem, disconnect it
now—the Modem Router replaces your modem .
2.
Connect one end of the
provided Ethernet cable to
your computer's Ethernet
adapter and the other end to an
Ethernet port on the back of the
Modem Router .
3.
Repeat step 2 for each additional computer or device that you want to
connect to the Modem Router .
NOTE:
the Ethernet adapter's documentation for more information .
4.
Connect one end of the phone
cable to the DSL port on the back .
5.
Connect the other end of the
phone cable to the wall jack
with ADSL service or microfilter .
NOTE:
a microfilter or splitter . (This is required for users in the UK; other
users should contact their ISPs to verify . ISDN users do not need
a microfilter .) If you require a microfilter, you must install one for
each phone or fax that you use . To install a microfilter, plug it into
a phone jack that has ADSL service, then connect one end of the
provided phone cable to the microfilter's DSL port .
Run the Setup CD-ROM to install the Modem Router . If you
If your computer's Ethernet adapter is not set up, refer to
If you experience static on your phone line, you may need
Connect the Computer
Connect the DSL
2
Advertisement
Table of Contents
