Table of Contents
Advertisement
Wireless-G Access Point
Wireless
You will use the Wireless tabs to enter a variety of wireless settings for the Access Point.
• Basic Wireless Settings. Enter the network mode, SSID, and other basic settings on this screen.
• Wireless Security. Use this screen to configure the Access Point's wireless security settings.
• Wireless MAC Filter. From this screen, you can allow or block access to your wireless network.
• Advanced Wireless Settings. Configure the Access Point's more advanced wireless settings.
Administration
You will use the Administration tabs to manage the Access Point.
• Management. This screen allows you to customize the password settings, as well as back up or restore the
Access Point's configuration file.
• SNMP. Configure the Simple Network Management Protocol (SNMP) settings on this screen.
• Log. Configure the Log settings for the Access Point on this screen.
• Factory Defaults. Use this screen to reset the Access Point to its factory default settings.
• Firmware Upgrade. Upgrade the Access Point's firmware on this screen.
Status
You will be able to view status information for your local and wireless network.
• Local Network. This screen will display current information on the Access Point and its local network.
• Wireless Network. This screen will display current information on the Access Point and its wireless network.
Chapter 6: Configuring the Wireless-G Access Point
Navigating the Utility
snmp: the standard e-mail protocol on the Internet.
firmware: the programming code that runs a
networking device.
23
Advertisement
Table of Contents
