Page 3
• After having installed the appliance, check that it is not tumble dry items which have been washed in water or standing on the inlet and drain hose and the worktop is require airing. not pressing the electrical supply cable against the •...
To disable this device and restore the possibility of closing the door, rotate the button counterclockwise until the groove is vertical. Product description Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.
Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain ac- tion phase (if available). The prewash and soak detergent is added at the beginning of the wash programme. The stain remover is added during the stain action phase.
Page 6
Drying Level you can select a drying time from 10 minutes to 130 mi- nutes (2.10). Every time you press this button the drying By pressing this button you can choose the required de- time increases by 5 mins. gree of drying for cottons and synthetics: Super Quick •...
• • Delay Time value = Iron dry (for Cottons) 7.10: Extra Rinse icon 7.6: Child safety lock (see «Personalisation» para- 7.11: Drying programme phase icons graph). 7.7: Selected drying time value • = Drying After selecting a drying programme, the drying time is •...
Child safety lock After pressing button 8: it will be impossible to change any other programme or option. This device permits you to leave the appliance unattended To enable or disable this option press simultaneously for and not to worry that children might be injured by or about 6 seconds buttons 5 and 6 until on the display, the cause damage to the appliance.
Page 9
Select the required programme by turning the Select the Delay Start by pressing the buttons 9 programme selector dial (1) Before you start the programme, if you wish to delay the start, press the button 9up or down repeatedly, to select Turn the programme selector dial to the required pro- the desired delay.
Changing a running programme is possible only by reset- to O. After a few minutes the door can be opened (pay at- tention to the water level and temperature!). ting it. Turn the programme selector dial to and then After closing the door, it is necessary to select the pro- to the new programme position.
Page 11
press this button the drying time increases by 5 mi- Select a spin cycle at the maximum spin speed al- nutes. lowed for the type of laundry in order to obtain the Note! best drying performances. The programme time will automatically increase by Select the drying programme for Cottons or Synthet- some minutes.
Fluff in the garments • To air-dry this type of fabrics when they are washed the first time. During the WASHING AND/OR DRYING PHASE, certain • To clean the filter. types of fabric, as sponge-cloth, wool, sweatshirt, could release fluff. •...
Although biodegradable, detergents contain substances Quantity of detergent to be used which, in large quantities, can upset the delicate balance The type and quantity of detergent will depend on the type of nature. of fabric, load size, degree of soiling and hardness of the The choice of detergent will depend on the type of fabric water used.
Garment labels • type of laundry • weight of the load size . For drying, follow the indications given on the manufac- The average drying time for a timed drying are indicated in turer’s labels: the «Drying programmes» chapter. The experience will •...
Page 15
Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry DELICATES SPIN 40°-Cold RINSE HOLD Main wash - Rinses NO SPIN Maximum spin speed 700 rpm NIGHT CYCLE EXTRA RINSE Max. load kg 4 - Red. load kg 2 SUPER QUICK Delicate fabrics: acrylics, viscose, polyester.
Page 16
Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry SPIN SPIN Drain and long spin Maximum spin speed 1400 rpm Max. load 8 kg Separate spin for hand washed garments and after programmes with the Rinse Hold and Night Cycle option selected.
Page 17
Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry HANDWASH SPIN 40°-Cold NO SPIN Main wash - Rinses RINSE HOLD Maximum spin speed 1000 rpm NIGHT CYCLE Max. load 2 kg Special programme for delicate fabrics with «hand washing»...
Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry COTTONS ECONOMY SPIN 90°-40° NO SPIN Main wash - Rinses RINSE HOLD Maximum spin speed 1400 rpm NIGHT CYCLE Max. load 8 kg EXTRA RINSE White and fast coloured cotton.
Timed Programmes Suggested dry- Degree of Drying Type of Fabric Drying Load Spin Speed ing time in Mi- nutes EXTRA DRY 6 kg 200-220 Cotton and linen (bath- Suitable for items to put away with- 4 kg 1400 125-135 robes, bath towels, etc) out ironing 2 kg 75-85...
Page 20
Washing drum Flush it out under a tap, to remove any traces of accumu- Rust deposits in the drum may occur due to rusting for- lated powder. eign bodies in the washing or tap water containing iron. To aid cleaning, the top part of the additive compartment Important! Do not clean the drum with acidic descaling should be removed.
Page 21
• the machine does not empty and/or spin • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: Disconnect the appliance. If necessary wait until the water has cooled down. Open the pump door.
Unscrew the hose from the tap. open the pump door; Clean the filter in the hose with a stiff brush. place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its Screw the hose back onto the tap.
Page 23
Problem Possible cause/Solution The door has not been closed. E40 • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. •...
Page 24
Problem Possible cause/Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose;...
Page 25
Problem Possible cause/Solution The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rota- tion of the drum. This may happen several times before the unbalance disap- pears and normal spinning can resume.
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model number, serial number, product number code and purchase date of your machine: the Service Centre will re- quire this information. Mod.
Programme Energy consumption Water consumption (litres) Programme duration (Mi- (KWh) nutes) Handwash 40° Wool 40° 1) «Cotton Eco» at 60°C with a load of 8 kg is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards.
Page 28
Slide out the relevant plastic spacers. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. Open the porthole and remove the polystyrene block fitted on the door seal. Positioning Install the machine on a flat hard floor.
Page 29
Caution! Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Set the hose correctly by loosening the ring nut. Af- ter positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. The inlet hose must not be lengthened.
Page 30
Place the drain hose into your standpipe, which should have an internal diameter of approximately 38 mm thus ensuring there is an air break between the drain hose and standpipe. “U” piece supplied 38 mm (½”) standpipe diameter When discharging into a standpipe ensure that the top of the standpipe is no more than 90 cm (35.4'') and no less than 60 cm (23.6'') above floor level.
Page 31
3 pin The drain hose may be extended to a maximum of 4 me- tres. An additional drain hose and joining piece is availa- ble from your local Service Force Centre. The joining piece must have an internal diameter of 18 mm. If your drain hose looks like this (see below) you do not require the “U”...
Page 32
noise, vibration or displacement. The base should pro- trude a few centimetres beyond the edges of the appliance. Warning! The appliance should NOT be placed on deep pile carpeting. Note! Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.
SHOWER SINK TOILET BATH BIDET WASHING DISHWASHER MACHINE RAINWATER ‘RUN-OFF’ FOUL DRAIN SURFACE WATER FOUL SEWERS DRAINS & SEWERS SEWAGE TREATMENT UNTREATED WORKS DISCHARGE TREATED DISCHRGE RIVER RIVER Environment concerns health, which could otherwise be caused by inappropriate The symbol on the product or on its packaging waste handling of this product.
Page 34
>PE<=polyethylene • The machine works more economically if it is fully loa- >PS<=polystyrene ded. >PP<=polypropylene • With adequate pre-treatment, stains and limited soiling This means that they can be recycled by disposing of can be removed; the laundry can then be washed at a them properly in appropriate collection containers.