Page 1 Satellite A210/Satellite Pro A210 TOSHIBA Satellite A210 Satellite Pro A210 Series User's Manual...
Page 2 © 2007 by TOSHIBA Corporation. All rights reserved. Under copyright law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
Page 3: When Using Your Computer
Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved. Bluetooth is a registered trademark owned by its proprietor and used by TOSHIBA under license. iLINK is a trademark of Sony Corporation. Other trademarks and registered trademarks not listed above may be used in this manual.
Page 4 Before you connect the computer to a power source, ensure that the voltage rating of the AC adapter matches that of the available power source. 115V/60Hz in most of North and South America and some Far Eastern countries such as Taiwan. 100 V/50Hz in eastern Japan and 100 V/60Hz in western Japan.
Page 5: Fcc Information
Use only the battery pack that came with the computer or an optional battery pack. Use of the wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. FCC information FCC notice "Declaration of Conformity Information"...
Page 6 Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's or expansion unit's external monitor port, parallel port, USB port and microphone jack.
Page 7 Regulation of the Canadian Department of Communications. Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Page 8 Optical Disc Drive Safety Instruction Be sure to check the international precautions at the end of this section. The optical drive that is used in this computer is equipped with a laser device. A classification label with the following sentence is affixed to the surface of the drive.
Page 9 Pioneer DVD Super Multi DVR-K17 The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Page 10 TOSHIBA Samsung Storage Technology DVD-Super Multi TS-L632 The DVD-Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
Page 11 Hitachi-LG Data Storage DVD Super Multi GSA-T20N The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
Page 12 Panasonic DVD Super Multi UJ-850U The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Page 13 TEAC DVD-Super Multi DV-W28EC The DVD-Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Page 14 To prevent direct exposure to the laser beam, do not try to open the enclosure. Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. CLASS 1 LASER PRODUCT LASER KLASSE 1 TOSHIBA CORPORATION 1-1-1, SHIBAURA, MINATO-KU, TOKYO 105-8001, JAPAN Satellite A210/Satellite Pro A210...
Page 15 To prevent direct exposure to the laser beam, do not try to open the enclosure. Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. CLASS 1 LASER PRODUCT LASER KLASSE 1 TOSHIBA CORPORATION 1-1-1, SHIBAURA, MINATO-KU, TOKYO 105-8001, JAPAN Satellite A210/Satellite Pro A210...
Page 16 International Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station."...
Page 17 VORSICHT: DIE VERWENDUNG VON ANDEREN STEURUNGEN ODER EINSTELLUNGEN ODER DAS DURCHFÜHREN VON ANDEREN VORGÄNGEN ALS IN DER BEDIENUNGSANLEITUNG BESCHRIEBEN KÖNNEN GEFÄHRLICHE STRAHLENEXPOSITIONEN ZUR FOLGE HABEN. Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision "CTR21"] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN).
Page 18: Region Selection
Japan regulations Region selection If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select the Japan country mode. It is illegal to use the modem in Japan with any other selection. Redial Up to two redial attempts can be made.
Page 19: Telephone Company Procedures
When you are notified, you will be given the opportunity to correct the problem and informed of your right to file a complaint with the FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation. Disconnection...
Page 20 Instructions for IC CS-03 certified equipment 1. NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user's satisfaction.
Page 21 Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been specifically configured to ensure compliance with Austel standards when the country/region selection is set to Australia.
Page 22 Notes for use of this device in New Zealand The grant of a Telepermit for a device in no way indicates Telecom acceptance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which this modem is capable of operating depend on a specific network implementation which is only one of many ways of delivering high quality voice telephony to customers.
Page 23: General Conditions
(b) caller identification information (which occurs between the first and second ring cadences) is not destroyed. The preferred method of dialling is to use DTMF tones (ATDT...) as this is faster and more reliable than pulse (decadic) dialling. If for some reason you must use decadic dealing, your communications program must be set up to record numbers using the following translation table as this modem does not implement the New Zealand "Reverse Dialling"...
Page 24: Important Notice
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.
Page 25: Instruction Manual For Safety And Comfort
Heat injury Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.
Page 26 xxvi Satellite A210/Satellite Pro A210...
Page 27: Table Of Contents
Special features ........1-10 TOSHIBA Value Added Package ......1-12 Utilities and Applications .
Page 28 Using optical disc drives ......4-19 TOSHIBA Disc Creator....... . 4-23 Media Care.
Page 29 Replacing the battery pack ......7-10 TOSHIBA Password Utility......7-13 Power-up modes .
Page 30 Hardware and system checklist......10-3 TOSHIBA support ........10-18 Chapter 11 Disclaimers CPU .
Page 31 Satellite A210/Satellite Pro A210 Preface Congratulations on your purchase of the Satellite A210/Satellite Pro A210 Series computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your Satellite A210/Satellite Pro A210 Series computer.
Page 32: Preface
Chapter 7, Power and Power-Up Modes, gives details on the computer's power resources. Chapter 8, HW Setup, introduces you to the TOSHIBA Hardware Setup program. Chapter 9, Optional Devices, describes the optional hardware available. Chapter 10, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn't seem to be working properly.
Page 33: Conventions
Preface Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary. Icons Icons identify ports, dials, and other parts of your computer.
Page 34: Equipment Checklist
Preface Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read.
Page 35 The system may not function properly if you use drivers that are not pre-installed or distributed by TOSHIBA. SD Memory Card Format Utility and other SD functions are packaged into TOSHIBA SD Memory Utilities. When uninstalling the SD utilities, click Start Control Panel Uninstall a program, and select TOSHIBA SD Memory Utilities.
Page 36 Preface xxxvi Satellite A210/Satellite Pro A210...
Page 37: Features
Basic features are described in a separate pamphlet. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Features Please visit your region's web site for the configuration details of the model...
Page 38 Satellite A210/Satellite Pro A210 Series Features Chipset ® Mobile AMD RX690/RS690MC Chipset Realtek High Definition Audio Codec ALC268 TEXAS INSTRUMENTS CardReader & 1394a Controller PCI8402 Realtek 10M/100M/1Gbps LAN Controller RTL8111B, 10M/100M LAN Controller RTL8101E (Depending on the model you purchased) Memory The graphics system in your computer may use part of the main system memory for graphics performance and therefore reduce the amount of...
Page 39 Satellite A210/Satellite Pro A210 Series Features Power Battery Pack 3-cell Lithium Ion smart battery pack with 10.8V*2000mAh* 6-cell Lithium Ion smart battery pack with 10.8V*4000mAh 9-cell Lithium Ion smart battery pack with 10.8V*6000mAh Approximately 12 hours or longer charging time to 100% battery capacity with system switched Approximately 4 hours charge time to 100% battery capacity with system switched off.
Page 40 Satellite A210/Satellite Pro A210 Series Features TouchPad/Dual Mode Pad A TouchPad/Dual Mode Pad and control buttons in the palm rest enable control of the on-screen pointer. The Dual Mode Pad is a TouchPad that provides normal touchpad features in its default mode and switches to a DualMode interface when the upper right corner of the TouchPad is tapped.
Page 41 Satellite A210/Satellite Pro A210 Series Features Disclaimer (HDD Drive Capacity) For more information on the Disclaimer regarding HDD Drive Capacity, please refer to the Disclaimers section in Chapter 11. DVD Super Multi Some models are equipped with a full-size DVD drive supporting ±...
Page 42 Satellite A210/Satellite Pro A210 Series Features HD DVD-ROM drive HD DVD-ROM reads HD DVD-ROMs at maximum 1x speed DVD-ROMs at maximum 8x speed and CD-ROMs at maximum 24x speed. It writes CD- Rs at up to 16x speed, CD-RWs at up to 10x speed, DVD-Rs at maximum 4x speed, DVD-RWs at maximum 6x speed, DVD+RWs at maximum 4x speed, DVD+Rs at maximum 4x speed, DVD+R...
Page 43 Satellite A210/Satellite Pro A210 Series Features HD DVD-R drive HD DVD-R reads HD DVD-ROMs at maximum 1x speed HD DVD-Rs at maximum 1x speed DVD- ROMs at maximum 8x speed and CD-ROMs at maximum 24x speed. It writes CD-Rs at up to 16x speed, CD-RWs at up to 10x speed, DVD-Rs at maximum 4x speed, DVD-RWs at maximum 6x speed, DVD+RWs at maximum 4x speed,...
Page 44 Satellite A210/Satellite Pro A210 Series Features Ports (depending on configuration) External monitor 15-pin analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus The computer has four Universal Serial Bus (USB) ports that comply with the USB 2.0 standard, which enables data transfer speeds more than 40 times faster than USB 1.1 (which this computer also supports).
Page 45 Satellite A210/Satellite Pro A210 Series Features Communications (depending on configuration) Modem An internal modem provides capability for data and fax communication. It supports the V.90 or V.92 standards depending on the region and provides a modem jack for connection to a telephone line.
Page 46: Special Features
Satellite A210/Satellite Pro A210 Series Features Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. TOSHIBA Value Key combinations that let you quickly modify the system configuration directly from the keyboard Added Package without running a system configuration program.
Page 47 Satellite A210/Satellite Pro A210 Series Features Low Battery When battery power is exhausted to the point that Automatic computer operation cannot be continued, the Hibernation system automatically enters Hibernation Mode and shuts itself down. You can specify the setting in the Power Options. Hibernation This feature lets you turn off the power without exiting from your software.
Page 48: Toshiba Value Added Package
Hot key function TOSHIBA utility launcher function When you start or resume your computer, the TOSHIBA Flash Cards may take a moment to become available and may display several times before completely activating. The hot key functions will be available once the TOSHIBA Cards are completely active.
Page 49: Utilities And Applications
DVD Video titles. Make sure to connect the computer’s AC adaptor when playing a DVD Video. Power-saving features may interfere with smooth playback. TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find...
Page 50 Ulead DVD You can edit digital video and make a DVD-Video ® MovieFactory and support Labelflash™ function. TOSHIBA The availability of Labelflash™ function depends on the model you purchased. FingerPrint utility This product has a fingerprint utility installed for the purpose of enrolling and recognizing fingerprints.
Page 51: Options
The following options are available: Memory Modules Two memory module can be installed in this computer. Use only PC5300* compatible DDRII memory modules. See your TOSHIBA dealer for details. * The availability of DDRII is dependent on the model you purchased. Battery Pack An additional battery pack can be purchased from your TOSHIBA dealer.
Page 52 Satellite A210/Satellite Pro A210 Series Features 1-16 Satellite A210/Satellite Pro A210...
Page 53: Chapter 2 The Grand Tour
Satellite A210/Satellite Pro A210 Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 54 The Grand Tour Front Edge Logo* Front Edge Logo indicates the computer series you bought. (The availability of this function depends on the model you purchased.) DC IN LED The DC IN LED indicates the computer is connected to the AC adapter and it is plugged into an AC power source.
Page 55: Right Side
The Grand Tour Multiple Digital The Multiple Digital Media Card Slot allows you to Media Card Slot* use media cards from digital still cameras and various forms of portable information equipment. (The availability of this function depends on the model you purchased.) Microphone Jack The standard 3.5 mm mini microphone jack enables connection of a three conductive type...
Page 56 The Grand Tour Univesal Serial Bus The Universal Serial Bus (USB 2.0 and 1.1 (USB) Ports compatible) port enables USB-equipped devices such as keyboards, mice, hard drives, scanners, and printers to be connected to the computer. Modem Jack* In regions where an internal modem is installed as standard equipment, this jack lets you use a modular cable to connect the modem directly to a telephone line.
Page 57: Left Side
The Grand Tour Left side The following figure shows the computer's left side. RGB M ONITOR XPRESS LOT FOR ARDBUS ENTS HDMI V1.2 PORT* TV O i.LINK (IEEE1394a) P LAN J NIVERSAL ERIAL (USB) P ORTS * The availability of this feature is dependent on the model you purchased. The left side of the computer RGB Monitor Port This 15-pin port lets you connect an external...
Page 58: Back Side
The Grand Tour Express Card Slot for This slot allows you to insert an Express Card. An Cardbus Card Slot* Express Card module is a small, modular add-in card technology based on PCI Express and Universal Serial Bus (USB) interface. The max. transmission rate at 2.5Gbps.
Page 59: Underside
The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. ATTERY ATCH XPANSION EMORY OCKET ATTERY ATTERY The bottom of the computer Hard Disk Drives store data, files and programs. Expansion Memory Use this socket to install a memory module to increase your computer's memory.
Page 60: Front With The Display Open
The Grand Tour Battery Pack The battery pack powers the computer when the AC adapter is not connected. For detailed information on the battery pack, refer to Chapter 7, Power and Power-Up Modes. Battery Pack Lock When you slide this into its locked position, the battery pack cannot be released even if you attempt to slide the battery pack latch into its open position.
Page 61 The Grand Tour Display Screen The LCD displays high-contrast text and graphics at a resolution up to 1280X800 pixels. Refer to Appendix B - Display Modes for further information. When the computer operates from the AC adapter, the display screen's image will be somewhat brighter than when it operates on battery power - this is normal and is designed to conserve battery power.
Page 62 The Grand Tour Play/Pause Button* Press this button to begin playing an audio CD, a DVD movie or digital audio files. This button also acts as a Pause button. (The availability of this function depends on the model you purchased.) Stop* Stops playing the CD, DVD or digital audio.
Page 63: Keyboard Indicators
The Grand Tour Web Camera* Take your picture or send your image to web contacts. (The availability of this function depends on the model you purchased.) Microphone* The Microphone is used with the Web Camera to talk to other Web Camera users and to record messages on windows media.
Page 64: Optical Disc Drive
Writable discs This section describes the types of writable discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics. CD-R discs can be written only once. The recorded data cannot be erased or changed.
Page 65 The Grand Tour DVD Super Multi drive supporting ±R Double Layer The full-size DVD Super Multi drive supporting ±R Double Layer module lets you record data to rewritable discs as well as run either 12cm (4.72") or 8cm (3.15") discs without using an adapter. The read speed is slower at the centre of a disc and faster at the other edge.
Page 66 The Grand Tour This drive cannot use discs that allow writing faster than 4x speed or faster (DVD-R and DVD+R with Single Layer), 4x speed or faster (DVD-RW and DVD+RW), 3x speed (DVD-RAM) or ultra-speed or faster (CD-RW) HD DVD-R drive The HD DVD-R supporting HD DVD-R Double Layer module lets you record data to rewritable discs as well as run either 12cm (4.72") or 8cm (3.15") discs without using an adapter.
Page 67 See Chapter 7, Power and Power-Up Modes, for details. The AC adapter Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.
Page 68 The Grand Tour 2-16 Satellite A210/Satellite Pro A210...
Page 69: Chapter 3 Getting Started
Satellite A210/ Satellite Pro A210 Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability. Connecting the AC adapter Opening the display Turning on the power...
Page 70: Connecting The Ac Adapter
100 to 240 volts and 50 or 60 hertz. For details on using the AC adapter to charge the battery pack, refer to Chapter 7, Power and Power-Up Modes. Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.
Page 71: Opening The Display
Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Push the display latch on the front of the computer. Opening the display 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel.
Page 72: Starting Up For The First Time
Getting Started Starting up for the first time When you first turn on the power, the computer's initial screen is the Windows Vista™ Startup Screen Logo. Follow the on-screen directions for each screen. During setup, you can click the Back button to return to the previous screen.
Page 73: Sleep Mode
Getting Started Sleep Mode If you do have to interrupt your work, you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode. In this mode data is maintained in the computer’s main memory so that, when you turn on the power again, you can continue working right where you left off.
Page 74: Hibernation Mode
Getting Started Executing Sleep Mode You can enter also Sleep Mode by pressing Fn + F3 - please refer to Chapter 5, The Keyboard, for further details. Youu can enter Sleep Mode in one of three ways: 1. Click Start then click the sleep button ( ) located in the power management buttons ( ), or click the arrow button...
Page 75: Starting Hibernation Mode
Getting Started Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits: Saves Data to the hard disk drive when the computer automatically shutsdown because of a low battery condition. You can return to your previous working environment immediately when you turn on the computer.
Page 76: Restarting The Computer
Getting Started Restarting the computer Certain conditions require that you reset the computer, for example if: You change certain computer settings. An errors and the computer does not respond you your keyboard commands. If you need to restart the computer, there are three ways this can be achieved: 1.
Page 77: Restoring The Pre-Installed Software From The Product Recovery Disc
2. Switch on the computer and, when the In Touch with Tomorrow TOSHIBA prompt appears, press the F12 key to display the Boot Menu. 3. Use the up or down cursor key to select the CD-ROM/DVD drive in the display menu.
Page 78: Create An Optical Recovery Discs
Getting Started Create an Optical Recovery Discs Be sure to connect the AC adaptor when you create Recovery Discs. Be sure to close all other software programs except the Recovery Disc Creator. Do not run software such as screen savers which can put a heavy load on the CPU.
Page 79: Restoring The Pre-Installed Software From The Recovery Hard Disk Drive
Getting Started Restoring the pre-installed software from the Recovery Hard Disk Drive A portion of the total hard disk drive space is configured as a hidden recovery partition. This partition stores files which can be used to restore pre-installed software in the event of a problem. If you subsequently set up your hard disk drive again, do not change, delete or add partitions in a manner other than specified in the manual, otherwise you may find that space for the required software is not available.
Page 80: Restoring The Pre-Installed Software From Your
When removing pre-installed drivers / utilities or when installing, you can setup the respective drivers / utilities from the following folder. C: \TOSAPINS\*** When Installing TOSHIBA SD Memory Card Format or other SD utilities, select TOSHIBA SD Memory Utilities from C:\TOSAPINS\. 3-12...
Page 81: Chapter 4 Operating Basics
Satellite A210/ Satellite Pro A210 Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad/Dual Mode Pad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal.
Page 82: Dual Mode Pad Button Function (Dual Mode Pad Is Provided With Some Models)
Operating Basics Do not press on the TouchPad/Dual Mode Pad too hard or press a sharp object such as a ball point pen against it. The TouchPad/Dual Mode Pad could be damaged. The TouchPad/Dual Mode Pad has similar functions to a two-button mouse with a scroll wheel.
Page 83: Using The Fingerprint
Operating Basics Mail button Starts your mail box for you to receive and send mails. ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. It also allows you to find communication problems and create profiles for easy switching between locations and communication networks.
Page 84: How The Swipe The Finger
Operating Basics How the Swipe the Finger Using the following steps when swiping fingers for FingerPrint registration or authentication will help to minimize authentication failures: 1. Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you.
Page 85 Operating Basics Do not scratch or poke the sensor with your nails or any hard or sharp objects. Do not press the sensor strongly. Do not touch the sensor with a wet finger or any wet objects - keep sensor surface dry and free of water vapor. Do not touch the sensor with a soiled or dirty finger as minute foreign particles of dust and dirt may scratch it.
Page 86: Points To Note About The Fingerprint Utility Software
Toshiba does not guarantee that the FingerPrint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this FingerPrint recognition software or utility.
Page 87: Set Up Procedure
Operating Basics Set up Procedure Please use the following procedure when first using FingerPrint authentication. FingerPrint Registration You should initially enroll the required authentication data using the ‘User Enrollment’ Wizard. In use, the FingerPrint authentication system will use the same username and password as defined within Windows operating system.
Page 88: Window Logon Via Fingerprint Authentication
Using this process will switch the password input screen across to the keyboard based entry screen. You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the FingerPrint Power-on Security and its extended function to allow FingerPrint to be used to access the computer when it is turned on.
Page 89: How To Enable Fingerprint Power-On Security Settings
Password and Windows Logon password before using the FingerPrint Power-on Security and this FingerPrint Single Sign On Feature. Please use TOSHIBA Password Utility to register your User/BIOS Password. If Windows Logon is not the default for your system, see Manual to register your Windows Logon password.
Page 90: Using The Web Camera
TOSHIBA does not guarantee that the FingerPrint utility technology will be completely secure or error-free or it will be accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the FingerPrint software.
Page 91: Using The Software
Operating Basics Using the software The Web Camera software is pre-configured to start when you turn on Windows Vista; if you need to restart it go to Start All Programs Camera Assistant Software Camera Assistant Software. NAPSHOT ISPLAY INDOW IDEO ECORDING AMERA ESOLUTION...
Page 92: Using The Internal Modem
Operating Basics Settings Choose from the: Options tab to change the tool position; the Picture tab to select picture output options such as size, export file and saving location; the Video tab to choose output settings such as Frame Rate, Size, Compression and the file save path;...
Page 93: Properties Menu
1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA > Networking. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/ Region in the Control Panel, the change may not take effect.
Page 94: Modem Selection
Operating Basics Settings You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region.
Page 95: Lan
Operating Basics Connecting the internal modem Do not pull on the cable or move the computer while the cable is connected. If you find that the modem speed is low or communication is interrupted when you are using the modem, please set the CPU speed to Maximum within the Power Options.
Page 96: Wireless Lan
Operating Basics To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices connected to the computer. 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place.
Page 97: Bluetooth Wireless Technology
Internet is an open invitation for outsiders to abuse your ISP account and privileges. 2. TOSHIBA is not liable for the eavesdropping on your data due to the use of the wireless LAN connection and any damage that may occur thereof.
Page 98: Product Support
® ® This Bluetooth Stack is based on Bluetooth Version 1.1/1.2/2.0+EDR specification. TOSHIBA cannot confirm compatibility between any PC products and/or other electronic devices that use Bluetooth™ other than TOSHIBA mobile PCs. ® Release Notes related to the Bluetooth Stack for Windows by TOSHIBA 1.
Page 99: Using Optical Disc Drives
Operating Basics Wireless communication switch You can enable or disable the wireless LAN function with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch forward to turn it on and backward to turn it off. Turn the switch off in airplanes and hospitals.
Page 100 Operating Basics Pressing the eject button b. Pressing the eject button will not open the drawer when the computer's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Page 101 Operating Basics 4. Lay the disc, label side up, in the drawer. Inserting a disc Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 5. Press gently at the center of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with its base.
Page 102: Removing Compact Discs
Operating Basics Removing compact discs To remove the disc, follow the steps below. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical disc indicator to go out before you open the drawer. Also, if the disc is spinning when you open it, wait for it to stop before you remove it.
Page 103: Toshiba Disc Creator
+RW to CD-R/RW using TOSHIBA Disc Ceator TOSHIBA Disc Ceator cannot record in packet format. You might not be able to use the Disc Backup function of TOSHIBA Disc Ceator to backup a DVD-R/-RW or DVD+R/+RW disc that was made with other software on a different DVD-R/-RW or DVD+R/+RW recorder.
Page 104: Media Care
Service Pack 2 or later to read it. Some optical media drives cannot read added data regardless of the operating system. TOSHIBA Disc Ceator does not support recording to DVD-RAM discs. To record to a DVD-RAM, use Explorer or other similar utility.
Page 105: Discs
Operating Basics 6. If your discs become dusty or dirty, wipe them with a clean dry cloth. Wipe from the center out, do not wipe in a circular direction around the disc. If necessary, use a cloth dampened in water or a neutral cleaner. Do not use benzine, thinner or similar cleaner.
Page 106: Cleaning The Computer
Operating Basics * The availability of this feature is dependent on the model you purchased. If an external display will not be connected next time you use your computer, you should cancel any extended desktop or clone display settings before shutting down your computer.
Page 107: Moving The Computer
Operating Basics Moving the computer The computer is designed for rugged durability. However, a few simple precautions taken when moving the computer will help ensure trouble-free operation. Make sure all disk activity has ended before moving the computer. Check the Built-in Hard Disk Drive and optical disc drive indicators on the computer.
Page 108 Operating Basics 4-28 Satellite A210/Satellite Pro A210...
Page 109: Summary
Satellite A210/Satellite Pro A210 Chapter 5 About the HD DVD This chapter describes the features, use of HD DVD and HD DVD Media. HD DVD is provided with some models. Summary HD DVD allows users to enjoy video, concerts and other packaged content by taking advantage of its large amount of storage space and high-quality audio and video.
Page 110 About the HD DVD HD DVD is a new standard which makes use of new technologies. As such, there is a possibility of problems occurring related to connection, compatibility or operation with some discs and other digital devices. The HD DVD-ROM logo signifies that this drive complies with the HD DVD physical standard, and does not signify compliance with the HD DVD Video standard.
Page 111: Using Toshiba Hd Dvd Player To Enjoy Hd Dvds
HD DVD Playback Restrictions HD DVD-ROM drive and HD DVD-R drive allow users to enjoy the strong visuals of HD DVD-Video. "TOSHIBA HD DVD PLAYER" software is provided for playback of HD DVD- Video. Important information on use HD DVD Playback HD DVD is a new standard which makes use of new technologies.
Page 112 "Windows Media Player" and other commercially available software cannot be used for HD DVD Video playback. HD DVD Video playback may take several moments to begin. When playing an HD DVD (Twin format disc), run it from the "TOSHIBA HD DVD Launcher Menu". When Using Frame dropping, audio skipping or out of synch audio and video may occur during playback of some HD DVD Video titles.
Page 113 PLAYER" is running. Display Devices & Audio "TOSHIBA HD DVD PLAYER" will only run when "Colors" is set to "Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in the "Display Settings". To open the Display Settings, click Start ->...
Page 114: Using Toshiba Hd Dvd Player
Print Screen functions are disabled even when running other applications besides "TOSHIBA HD DVD PLAYER" and when "TOSHIBA HD DVD PLAYER" is minimized. Please close the "TOSHIBA HD DVD PLAYER" to use the Print Screen function. Carry out the installation/uninstallation of the "TOSHIBA HD DVD PLAYER"...
Page 115: Operating Toshiba Hd Dvd Player
Application selection screen 2. Touch the CD/DVD panel on the Front operation panel. Or select Start -> All Programs -> TOSHIBA HD DVD PLAYER to start "TOSHIBA HD DVD PLAYER". The TOSHIBA DVD PLAYER can also be started from the Media Center top menu.
Page 116 DVD PLAYER playback of HD DVD-Video discs. Click the Display Control window Area to display the Control window when it is hidden. Please refer to the following "TOSHIBA HD DVD PLAYER Control window" section for more information. Satellite A210/Satellite Pro A210...
Page 117: Open Toshiba Hd Dvd Player Help
About the HD DVD Open TOSHIBA HD DVD PLAYER HELP TOSHIBA HD DVD PLAYER features and instructions are also explained in detail in "TOSHIBA HD DVD PLAYER Help". Use the following procedure to open "TOSHIBA HD DVD PLAYER Help". 1. Click the "Help" button ( ) in the Display Area.
Page 118 Play Fast Slow Fast Stop Forward Motion Rewind TOSHIBA HD DVD PLAYER Control window (2) Eject Opens the disc tray. Previous Chapter Jumps to the previous chapter. Next Chapter Jumps to the next chapter. One-touch Rewinds by a specified amount of time and Replay continues playback from that position.
Page 119 Sound Return Menu Title/Chapter Drive Repeat Search Specification TOSHIBA HD DVD PLAYER Control window (3) Subtitle Switches between available subtitles. Sound Switches between audio tracks for titles which have more than 1 audio track. Angle Switches between angles for multi-angle compatible titles.
Page 120: Using The Computer In Place Of An Hd Dvd Player
About the HD DVD Using the Computer in place of an HD DVD Player Videos played using "TOSHIBA HD DVD PLAYER" included with the computer can be displayed on a television equipped with an HDMI input port. HD DVD-Video can only be displayed on the computer's display panel or on a television connected to the HDMI out port.
Page 121: Hd Dvd-R Disc Writing Software
HD DVD-R discs. Ulead DVD MovieFactory can be used to write files in video format. TOSHIBA Disc Creator can be used to write data. Refer to the manuals or help files included with the software for detailed usage instructions.
Page 122: Writing Cds/Dvds On A Dvd Super Multi Drive Or
The following is an HD DVD-Video display compatibility list. O: The display of TOSHIBA HD DVD PLAYER is possible. X: The display of TOSHIBA HD DVD PLAYER is impossible. When using TOSHIBA HD DVD...
Page 123: Before Writing Or Rewriting
Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
Page 124 About the HD DVD DVD-R FUJIFILM Corporation Labelflash™ DVD+R FUJIFILM Corporation Labelflash™ If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it.
Page 125: When Writing Or Rewriting
Write from the computer's hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. Writing with software other than TOSHIBA Disc Creator or Ulead DVD ®...
Page 126: Writing Cds/Dvds/Hd Dvds On A Hd Dvd-R Drive
Set printable surface for underside. 2. Click Start All Programs DVD MovieFactory for TOSHIBA Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 3. Click Print Disc Label Label Printing. Ulead Label@Onece is started. 4. Click the General tab.
Page 127 Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW, DVD-R/+R/-RW/+RW/-RAM and HD DVD-R media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
Page 128 About the HD DVD DVD-R (Dual Layer) MITSUBISHI KAGAKU MEDIA CO., LTD HD DVD-R (Single Hitachi Maxell Ltd. Layer) MITSUBISHI KAGAKU MEDIA CO., LTD HD DVD-R (Dual MITSUBISHI KAGAKU MEDIA CO., LTD Layer) If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur.
Page 129 Write from the computer's hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. Writing with software other than TOSHIBA Disc Creator or Ulead DVD ®...
Page 130: How To Learn More About Ulead Dvd Moviefactory
DV-Camcorder: 1. Click Start All Programs DVD MovieFactory for TOSHIBA Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Insert a DVD-RW or DVD+RW disc in Burner. 3. Click Video Disc Burn Video to Disc to launch Direct Recording dialog box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.
Page 131 About the HD DVD Do not operate DVD MovieFactory immediately after turning on the computer. Please wait until all Disc Drive activity has stopped. When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data.
Page 132 About the HD DVD 5-24 Satellite A210/Satellite Pro A210...
Page 133: Chapter 6 The Keyboard
Satellite A210/Satellite Pro A210 Chapter 6 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard. By pressing some keys in combination, all the 104/ 105-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with.
Page 134: F1 ... F12 Function Keys
Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
Page 135: Hotkeys
The Keyboard Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key. Hotkeys Fn + ESC Mute Turns the volume on and off. Fn + F1 Lock Enters "Lock computer" mode. To restore your desktop, you need to log on again. Fn + F2 Power Plan Mode Displays the power save modes and lets you change the power settings...
Page 136: Windows Special Keys
The Keyboard Fn + 1 Zoom Out To reduce the icon size on the desktop or the application window, press the 1 key while holding down the Fn key. Zoom In To enlarge the icon size on the desktop Fn + 2 or the application window, press the 2 key while holding down the Fn key.
Page 137 The Keyboard The numeric keypad overlay (U.S.) Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold down Fn and press any other key. All keys will operate as if the overlay were off.
Page 138: Generating Ascii Characters
The Keyboard Temporarily changing modes If the computer is in Numeric mode, you can switch temporarily to Arrow mode by pressing a shift key. If the computer is in Arrow mode, you can switch temporarily to Numeric mode by pressing a shift key. Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation.
Page 139: Chapter 7 Power And Power-Up Modes
Satellite A210/Satellite Pro A210 Chapter 7 Power and Power-Up Modes The computer's power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Page 140 DC IN off Battery Computer goes into capacity Hibernation or shuts down exhausted (depending on the TOSHIBA Power Saver setting) No battery • No operation installed • LED: Battery off DC IN off * The LED is dependent on the model you purchased.
Page 141: Power Indicators
Power and Power-Up Modes Power indicators As shown in the above table, the Battery, DC IN and Power indicators alert you to the computer's operating capability and battery charge status Battery indicator Check the Battery indicator to determine the status of the battery. The following indicator lights indicate the battery status.
Page 142: Battery Types
Press <F1> to resume, <F2> to Setup. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations.
Page 143: Care And Use Of The Battery Pack
3. Set correct time and date. If you still see the error message after performing the above actions, please contact your TOSHIBA service representative. Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack.
Page 144 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture.
Page 145: Charging The Batteries
Power and Power-Up Modes 5. Charge the battery pack only in an ambient temperature between 5 and 30 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate and the battery life might be shortened. 6. Be sure to monitor the remaining battery power. If the battery pack or real time clock battery discharge completely, Sleep Mode will not function, and data in memory will be lost, and the computer might register an incorrect time and date.
Page 146: Battery Charging Notice
Power and Power-Up Modes Time The following table shows the time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack about 12 or longer about 4 or longer RTC battery about 24 about 24 with AC or Battery pack The charging time when the computer is on is affected by ambient...
Page 147: Monitoring Battery Capacity
Power and Power-Up Modes Leaving the AC adapter connected will shorten battery life. At least once a week, run the computer on battery power until the battery is fully discharged, then recharge the battery. Monitoring battery capacity Remaining battery power can be monitored using the following methods. Clicking the battery icon on the task bar Via the Battery Stats in the Windows Mobility Center Window You should wait at least 16 seconds after turning on the computer before...
Page 148: Replacing The Battery Pack
Power and Power-Up Modes Retaining data with power off (Sleep mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery Approximately 1.5 days (Sleep mode, 9-cell) Approximately 1 day (Sleep mode, 6-cell) Approximately 0.5 day (Sleep mode, 3-cell)* Approximately 1 month (Shut down mode, all type of battery packs)
Page 149 Power and Power-Up Modes 5. Unlock the Battery Pack Lock. Removing the battery pack-1 6. Slide the battery pack latch to the left, then pull the battery out of the battery bay. Removing the battery pack-2 Satellite A210/Satellite Pro A210 7-11...
Page 150: Installing The Battery Pack
The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer.
Page 151: Toshiba Password Utility
Power and Power-Up Modes TOSHIBA Password Utility The TOSHIBA Supervisor Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Supervisor Password Utility are different from ® the Windows login password. User Password To start the utility, point to or click the following items:...
Page 152: Power-Up Modes
Power and Power-Up Modes To enter a password manually, follow these steps: 1. Turn on the power as described in Chapter 3, Getting Started. The following message will appear in the LCD: Enter Password [xxxxxxxx] At this point, the hotkeys Fn + F1 to F9 do not work. They will function after you enter the password.
Page 153: Chapter 8 Hw Setup
Satellite A210/Satellite Pro A210 Chapter 8 HW Setup This chapter explains how to use the TOSHIBA HW Setup utility to configure your computer. TOSHIBA HW Setup lets you configure settings for various hardware devices through a number of tabs titled General, Password, Display, Boot Priority, Keyboard, CPU, LAN, and USB.
Page 154: Boot Priority
HW Setup General This window displays the BIOS version and contains two buttons: Default Return all HW Setup values to the factory settings. About Display the HW Setup version. Setup This field displays BIOS Version and date. When finish BIOS update , please restart your computer and press F2 into BIOS setup manual and load BIOS default one time Password This tab allows you to set or reset the user password for power on.
Page 155: Legacy Usb Support
HW Setup Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Sleep mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in Sleep mode. Enabled Enables the Wake-up on Keyboard feature.
Page 156 HW Setup Satellite A210/Satellite Pro A210...
Page 157: Chapter 9 Optional Devices
Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory Express Card Support 54/34 Express Card SD (Secure Digital) / SDHC (Secure Digital High Capacity) /...
Page 158: Express Card
Optional Devices Express Card The computer (depending on the model) is equipped with an Express Card expansion slot that can accommodate two standard module formats; an Express Card/34 module and an Express Card/54 module. An Express Card module is a small, modular add-in card technology based on PCI Express and Universal Serial Bus (USB) interfaces.
Page 159: Sd/Sdhc/Mmc/Ms/Ms Pro/Xd Memory Cards
Optional Devices SD/SDHC/MMC/MS/MS Pro/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory. Card Type Capacities up to 2GB...
Page 160: Installing A Memory Card
Optional Devices Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Inserting a memory card Make sure the memory card is oriented properly before you insert it. ®...
Page 161: Memory Expansion
In this case the computer will issue a warning. CAUTION: If you want to upgrade system memory, you should only use certified modules. Ask your vendor or check the TOSHIBA web site for a list of approved memory products. Satellite A210/Satellite Pro A210...
Page 162 Optional Devices Insert the two memory modules of the same specifications and capacity into Slot A (Upper) and Slot B (Bottom) respectively. The computer will operate in dual channel mode. You can access the inserted memory modules efficiently in dual channel. Installing Memory on Bottom Side If you use the computer for a long time, the memory modules will become hot.
Page 163 Optional Devices Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. 7. Push the module down so it lies flat. Latches on either side will click into place to secure the module.
Page 164: Additional Battery Pack
Optional Devices Latch Removing the memory module 6. Seat the cover and secure its screw. 7. Replace the battery. Additional battery pack You can increase the portability of the computer with additional battery packs. If you're away from an AC power source and your battery runs low, you can replace it with a freshly charged battery.
Page 165: Television
Optional Devices To change the display settings, press Fn + F5. If you disconnect the monitor before you turn the computer off, be sure to press Fn + F5 to switch to the internal display. Refer to Chapter 6, The Keyboard, for details on using hot keys to change the display setting.
Page 166 Optional Devices For ATI Mobility Radeon X1200/HD2400/HD2600* 1. Click Start > Control Panel > Personalization. 2. Choose Display Settings to change resolution and colors. 3. Click Start and All Programs. 4. Click Catalyst Control Center 5. Select CCC. 6. In Catalyst Control Center window, setup your television or CRT and Notebook displays.
Page 167: Hdmi
Optional Devices HDMI A HDMI monitor can be connected to the HDMI out put on the computer. To connect monitor, follow the steps as detailed below: As the port operation of all HDMI (High-Definition Multimedia Interface) monitors has not be confirmed, some HDMI monitors may not function properly.
Page 168: Settings For Display Video On Hdmi
Optional Devices Settings for display video on HDMI To view video on the HDMI device, be sure to configure the following settings otherwise you may find that nothing is displayed. End user refer page 8-9 and Appendix B-4, for more detail, to out put HDMI device.
Page 169: Remote Controller
Optional Devices Remote Controller Pause Access indictor Play Power Stop Record Fast Forward Rewind Skip Replay Start Back More Info Arrows Mute Volume + Channel/Page Volume - Live TV Guide DVD Menu Recorded TV Numbers Clear Enter Remote Cotroller Satellite A210/Satellite Pro A210 9-13...
Page 170 Optional Devices Power Starts or terminates the operating system. This button functions like the Power button of your computer. By default, the Sleep Mode is equivalent to the Power Off state of your computer. To change the setting, click Start, select Control Panel ->...
Page 171: Using The Remote Controller
Optional Devices Volume + Increases the volume while watching TV, viewing DVD’s or replaying CD’s. Volume - Decreases the volume while watching TV, viewing DVD’s or replaying CD’s. Start Opens Media Center to the main window. Changes the TV channel or moves a page up and Channel/Page up(+) and down(-) down, depending on the available options.
Page 172 Optional Devices Operational range of the Remote Controller Point the Remote controller at your computer and press a button. The operational angle and distance are described below. Distance Within 5m from the infrared receiver window. Angle Within a 30 degree horizontal and 15 degree vertical range oof the infrared receiver window.
Page 173: Installing/Removing Batteries
Optional Devices Installing/Removing batteries Be sure to install the dry batteries provided with this product using the Remote Controller. The procedures for installing and removing the bateries vary depending on the type of the Remote Controller. Check the type and then install or remove the bateries as instructed.
Page 174: Installing The Batteries
Optional Devices Installing the batteries 1. open the battery cover on the back of the Remote Controller. Slide the Cover in the direction of the arrow to remove the cover. Battery cover Opening the battery cover 2. Insert the batteries in place. Be sure to place the batteries with their polarities (+ and -) in the correct position.
Page 175: Replacing The Batteries
Optional Devices Battery cover Closing the battery cover Replacing the batteries When the batteries in ther Remote Controller reach the end of their life, the Remote Controller may not operate correctly or work only within a short distance from your computer. In this instance, you should purchase new batteries and replace the discharged ones.
Page 176: I.link (Ieee1394A)
Optional Devices i.LINK (IEEE1394a) i.LINK (IEEE1394a) is used for high-speed data transfer for a range of compatible devices such as: Digital video cameras Hard disk drives MO drives Optical disc drives i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply.
Page 177: Security Lock
Optional Devices Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer.
Page 178 Optional Devices 9-22 Satellite A210/Satellite Pro A210...
Page 179: Chapter 10 Troubleshooting
Satellite A210/Satellite Pro A210 Chapter 10 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.
Page 180: Preliminary Checklist
Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. Make sure you turn on all peripheral devices before you turn on the computer.
Page 181: Hardware And System Checklist
Troubleshooting Software The problems may be caused by your software. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation.
Page 182: Self Test
If any of the following conditions are present, the self test failed: The computer stops and does not proceed to display information or messages except the TOSHIBA logo. Random characters appear on the screen, and the system does not function normally.
Page 183: Overheating Power Down
Troubleshooting Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems.
Page 184 Troubleshooting Battery If you suspect a problem with the battery, check the DC IN indicator as well as the indicators for the battery. For information on indicators and battery operation see Chapter 7, Power and Power-Up Modes. Problem Procedure Battery doesn't power The battery may be discharged.
Page 185: Lcd Panel
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 6, The Keyboard. Problem Procedure Some letter keys Check that the numeric keypad overlay is not produce numbers. selected. Press Fn + F10 and try typing again. Output to screen is Make sure the software you are using is not garbled.
Page 186: Hard Disk Drive
Troubleshooting Hard disk drive Problem Procedure Computer does not Insert a system disk and reboot. boot from hard drive. There may be a problem with your operating system files. Refer to your operating system documentation. Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk.
Page 187 Troubleshooting Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Procedure Cannot access Wireless Make sure the computer's wireless communication switch is set to on. Use the ConfigFree program that comes pre- installed in your computer to see LAN status.
Page 188: Sound System
Troubleshooting Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. If appropriate, make sure the headphone connection is secure. Check Windows Device Manager and ensure the sound function is enabled and that settings for I/O address, interrupt level and DMA are correct for your software and do not conflict with other hardware devices that you have connected to the...
Page 189: Usb Mouse
Troubleshooting USB mouse Problem Procedure On-screen pointer does The system might be busy. If the pointer is shaped not respond to mouse as an hourglass, wait for it to resume its normal movement shape and try again to move it. Make sure the mouse is properly connected to the USB port.
Page 190: Tv Output Signal
Troubleshooting TV output signal Problem Procedure Display on TV is poor Make sure the TV type is correct for your area: NTSC (US) or PAL (Europe). No display Try adjusting the contrast and brightness controls on the external monitor. Press hotkeys Fn + F5 to change the display. Refer to Chapter 6, The Keyboard.
Page 191 Troubleshooting Memory expansion Refer also to Chapter 9, Optional Devices, for information on installing memory modules. Problem Procedure The computer hangs up Make sure the memory module installed in the and issues beep expansion slot is compatible with the computer. sounds.
Page 192 Troubleshooting Problem Procedure Character display In data transmission, make sure the parity bit and becomes garbled stop bit settings correspond with those of the during a communication remote computer. Check the flow control and communication protocol. You cannot receive an Check the "rings before auto answer"...
Page 193 DVD Super Multi drive. Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA. Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording.
Page 194 Troubleshooting HD DVD-R or HD DVD-ROM drive supporting disc recording For more information, refer to Chapter 5, About the HD DVD. Problem Procedure You cannot access a Make sure the drive's drawer is securely closed. CD/DVD/HD DVD in the Press gently until it clicks into place. drive Open the drawer and make sure the disc is properly seated.
Page 195: Disk Drive
Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA. Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording.
Page 196: Toshiba Support
QL setting. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.
Page 197: Where To Write
Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia Germany & Austria TOSHIBA (Australia) Pty, Ltd.
Page 198 Troubleshooting 10-20 Satellite A210/Satellite Pro A210...
Page 199: Chapter 11 Disclaimers
For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact Toshiba technical service and support, refer to Fingerprint Sensor section in Chapter 10 Troubleshooting for more information. User’s Manual...
Page 200: Memory (Main System)
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
Page 201: Hdd Drive Capacity
Disclaimers HDD Drive Capacity 1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and therefore shows less storage capacity.
Page 202: Copy Protection
Disclaimers Copy Protection Copy protection technology included in certain media may prevent or limit recording or viewing of the media. Images All images are simulated for purposes of illustration. LCD Brightness and Eye Strain Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes.
Page 203: Specifications
Satellite A210/Satellite Pro A210 Appendix A Specifications This appendix summarizes the computer's technical specifications. Dimensions 362mm (W) x 267.8mm (D) x 39.3mm (H. Max.) 267.8mm 39.3mm User’s Manual...
Page 204: Environmental Requirements
Specifications Weight Starting at 2.72kg / 5.99lbs* * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected. Environmental Requirements Conditions Ambient temperature Relative humidity 5°C to 35°C 20% to 80% Operating Non-operating -20°C to 65°C Conditions Altitude (from sea level) Operating...
Page 205 Specifications Communication Data: Protocol ITU-T-Rec V.21/V.22/V.22bis/ (Former CCITT) V.32/ V.32bis/V.34/ V.90/ V.92(only for USA and Canada) Bell 103/212A Fax: ITU-T-Rec V.17/V.29/V.27ter /V.21 (Former CCITT) Communication Data transmission and reception Speed 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/ 31200/ 33600 bps Data reception only with V.90/V.92 28000/29333/30666/32000/33333/34666/ 36000/37333/38666/40000/41333/42666/ 44000/45333/46666/48000/49333/50666/...
Page 206 Specifications Satellite A210/Satellite Pro A210...
Page 207: Display Modes
Satellite A210/Satellite Pro A210 Appendix B Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor. If you are running some applications (for example a 3D application or video playback and so on), you may see some disturbance, flickering or frame dropping on your screen.
Page 208: Displaying Movies On A Tv Or Crt
Display Modes Some of display mode might not be supported depending on the external monitor which you use. Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer's LCD and on an external TV or CRT monitor.
Page 209 Display Modes For ATI Mobility Radeon X1200/HD2400/HD2600* 1. Click Start > Control Panel > Personalization. 2. Choose Display Settings to change resolution and colors. 3. Click Start and All Programs. 4. Click Catalyst Control Center 5. Select CCC. 6. In Catalyst Control Center window, setup your television or CRT and Notebook displays.
Page 210 Display Modes Displaying movies on a HDMI Monitor This section describes how to set up your system to display movies a HDMI monitor. To connect a HDMI monitor, follow the steps below. 1. Turn the computer off. 2. Use a HDMI cable (not supplied) to connect the HDMI monitor to the HDMI out port on your computer.
Page 211: Ac Power Cord And Connectors
Satellite A210/Satellite Pro A210 Appendix C AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Minimum 1.7 meters Length:...
Page 212 AC Power Cord and Connectors For the United States and Canada, two pin plug configuration must be a 2- 15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U. S. National Electrical code handbook and the Canadian Electrical Code Part II.
Page 213 Satellite A210/Satellite Pro A210 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write CMOS: complementary metal-oxide semiconductor CPU: central processing unit...
Page 214 Glossary SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array WXGA: wide extended graphics array adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
Page 215 Glossary capacity: The amount of data that can be stored on a magnetic storage device such as a floppy disk or hard disk. It is usually described in terms of kilobytes (KB), where one KB = 1024 bytes and megabytes (MB), where one MB = 1024 KB.
Page 216 Glossary DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries. default: The parameter value automatically selected by the system when you or the program do not provide instructions. Also called a preset value.
Page 217 Glossary gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also megabyte. graphics: Drawings, pictures, or other images, such as charts or graphs, to present information. hard disk: A non-removable disk usually referred to as drive C. The factory installs this disk and only a trained engineer can remove it for servicing.
Page 218 Glossary Light Emitting Diode (LED): A semiconductor device that emits light when a current is applied. Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewing- side coating is etched into character forming segments with leads that extend to the edge of the glass.
Page 219 Glossary parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1. 2) In serial communications, an error detection bit that is added to a group of data bits making the sum of the bits even or odd. Parity can be set to none, odd, or even.
Page 220 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. TouchPad/Dual Mode Pad: A pointing device integrated into the TOSHIBA computer palm rest. Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.

This manual is also suitable for:

Satellite pro a210 series

Toshiba Satellite A210 Series User Manual

Preface

Chapter 1 Satellite A210/Satellite Pro A210 Series

Chapter 2 The Grand Tour

Chapter 3 Getting Started

Chapter 4 Operating Basics

Chapter 5 About the HD DVD

Chapter 6 The Keyboard

Chapter 7 Power and Power-Up Modes

Chapter 8 HW Setup

Chapter 9 Optional Devices

Chapter 10 Troubleshooting

Chapter 11 Disclaimers

Quick Links

Related Manuals for Toshiba Satellite A210 Series

Summary of Contents for Toshiba Satellite A210 Series

This manual is also suitable for:

Table of Contents