Related Manuals for Zanussi TL572C
Summary of Contents for Zanussi TL572C
- Page 1 Z Z Z Z Z ANUSSI ANUSSI ANUSSI ANUSSI ANUSSI WASHING MACHINE TL 572 C INSTRUCTIONS MANUAL 146 0022 00...
-
Page 2: Table Of Contents
CONTENTS For the user For the installer Safety instructions Technical information Description of the appliance Installation Use of your appliance Unpacking Operating instructions Installation Programme chart 10/11 Levelling Hints & Tips 12-14 Moving of the appliance Cleaning and maintenance Water connection If something doesn't work 16/17 Electrical connection... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS You must read the whole of this instruction book Small and delicate objects (e.g. baby socks, before you use the appliance. Follow the advice stockings) can be easily washed inside a small carefully. Keep the book for future reference. If you pillowcase with a zip fastener or in larger sell or give away the appliance, make sure that the socks. - Page 4 Safeties Lid : your washing machine is equipped with a safety avoiding the switching of the appliance when the flapdoors of the drum are opened ; the closure of the lid is so impossible. An electromechanic safety prohibits the opening of the lid when the washing machine works and 2 minutes after the end of the programme.
-
Page 5: Description Of The Appliance
DESCRIPTION OF THE APPLIANCE Temperature selector Timer Control panel Pushbuttons Handle for opening lid Lever for castors Trap door for lint filter Detergent dispenser Symbols ( ) Washing powder for programmes with pre-wash (1). ( ) Washing powder or liquid detergent for the main wash (2). -
Page 6: Use Of Your Appliance
USE OF YOUR APPLIANCE The control panel Never turn the programme selector when the appliance is working. TL 572 C °C 1 ON/OFF pushbutton " " 5 Temperature selector It enables to choose the most adapted temperature Press the ON/OFF pushbutton, the programme between cold ( ) and 90°C. -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS 1. Place the laundry in the drum lift up the lid of the machine. open the drum with your two hands by pressing the button A and the two flapdoors till they disengage. introduce the laundry into the drum ; close the drum and the lid of the machine. -
Page 8: Select The Temperature
6. Select the temperature °C Choose the temperature which corresponds to the chosen programme, with the help of the indica- tions or the programme table, according to the fibers and the fastness of the colours. 7. Select the programme Choose the programme according to the nature and the degree of soil of the laundry. -
Page 9: Programme Chart
PROGRAMMES CHART Programmes for cotton/linen Maximum load : 5 kg (cotton) Programmes Temperatures Detergent Water Time description (°C) dispensers consumption in minutes to use in liters White with prewash 60 - 90 White without prewash 60 - 90 White without prewash 40 - 60 Short programme 30 - 40... - Page 10 Programmes for synthetics/delicates/wool Maximum loads : 2,5 kg (synthetics), 1 kg (wool). Programmes Temperatures Detergent Water Time description (°C) dispensers consumption in minutes to use in liters Synthetics with prewash 30 - 60 Synthetics without prewash 30 - 60 Delicate - 40 Wool - 40...
-
Page 11: Hints And Tips
HINTS AND TIPS Washing hints Resistant white and coloured synthetics can normally be washed at 60°C but also in this case You are advised not to leave your laundry too long, 40°C is sufficient if the laundry is not excessively especially when damp. -
Page 12: Liquid Detergents
To remove paint stains, for example, use a volatile Liquid detergents substance such as turpentine: in this case, you Using the new automatic dispenser for liquid should wait for it to dry completely before washing. detergents, it is possible to use a liquid detergent The manufacturer of your washing machine is not for main wash phases if you start the washing responsible for any damage deriving from the use... -
Page 13: Wash Code Symbols
Wash code symbols These symbols appear on fabric label, in order to help you choose the best way to treat your laundry. Strong wash Max. wash Max. wash Max. wash Max. wash temperature 30°C temperature 95°C temperature 60°C temperature 40°C WASH Do not Hand... -
Page 14: Cleaning And Maintenance
CLEANING AND MAINTENANCE Make sure that the machine is unplugged and the water tap turned off before undertaking any kind of maintenance. Bodywork The outside of the machine can be cleaned with warm water and a neutral non-abrasive household detergent. Wipe with clean water and dry after cleaning. -
Page 15: If Something Doesn't Work
IF SOMETHING DOESN'T WORK ? Problems Problems Problems Problems Problems Solutions Solutions Solutions Solutions Solutions The wash results are not as usual The wash results are not as usual The wash results are not as usual The wash results are not as usual The wash results are not as usual Check that : was the wrong quantity or the wrong detergent... - Page 16 IF SOMETHING DOESN'T WORK ? Problems Problems Problems Problems Problems Solutions Solutions Solutions Solutions Solutions The machine vibrates or is too noisy Check that : all the transit bolts and packing have been removed. all the feet resting firmly on the ground, the lock nuts have been secrured.
-
Page 17: Service
SERVICE If you have unable to identify or solve the problem, consult our servicing department. Before telephoning, make a note of the make, model and date of purchase of your machine : the service department will require this information. Data plate You will find these informations on the data plate of the appliance. -
Page 18: For The Installer
FOR THE INSTALLER Technical information Dimensions height with panel 895 mm height without panel 850 mm width 397 mm depth 600 mm Power supply voltage / frequency 220-230 V / 50 Hz Total power absorbed 2300 W (10 A) Heater rating 1950 W Water pressure minimum... -
Page 19: Installation
Installation The floor must be clean and dry, free from floor polish and other greasy substances, so that the machine does not slide about. Do not use any grease as lubrification. Installation on deep pile carpets and floor coverings with foam backings is not recommended, as the stability of the machine is no longer guaranteed. -
Page 20: Water Connection
Water connection Connect the water inlet hose to a cold water tap with a 3/4" gas threaded orifice, after having inserted the rugger sealing washer into the hose collar. If the water connection is made onto new pipes or onto pipes which have not been used for a long time, it is advisable to run off a certain amount of water before connecting the machine.