PP945SM
GE Profile
Series 30" Built-In CleanDesign Electric Cooktop
™
Dimensions and Installation Information (in inches)
Note: Check local codes for required breaker size
†
KW Rating
Important: Requires a 5" free area between
240V
7.8
the bottom of the cooktop to any combustible
208V
5.9
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Breaker Size
Refer to installation instructions. Requires a
240V
40 Amps
15" minimum from cooktop to adjacent
†
overhead cabinets. Units are furnished with
208V
30 Amps
†
a 48" flexible armored cable.
Note: 30" Ribbon cooktops are approved for use over select GE 30" Single
Wall Ovens and Warming Drawers. All 30" ribbon cooktops can be installed
over 27" wall ovens and warming drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile
consult both the cooktop and downdraft installation instructions packed
with product before installing. Cooktop gas/electric supply may need to be
re-routed to install downdraft. The countertop must be at least 26" deep with
a flat surface area of 23-1/2" or more, front to back. In addition, other
clearances to the front edge of the countertop must be considered.
Consult cabinet and countertop manufacturer's specs for flush mount
installation prior to install. Before installing, consult installation
instructions packed with product for current dimensional data.
™
Telescopic Downdraft System,
For answers to your Monogram
questions, visit our website at geappliances.com
or call GE Answer Center
®
service, 800.626.2000.
or GE
appliance
®
®
Specification Revised 3/13
Listed by
Underwriters
Laboratories
220591