Related Manuals for Zanussi DWS 697
Summary of Contents for Zanussi DWS 697
- Page 1 GESCHIRRSPÜLER DISHWASHER DWS 697 GEBRAUCHSANWEISUNG INSTRUCTION BOOKLET 152985 28/0...
-
Page 2: Table Of Contents
Contents For the user For the installer Important safety information Installation instructions Water supply connections Description of the appliance Water outlet hose connection The control panel Electrical connection Before use Adjusting the worktop Setting the water softener Fitting under a counter Filling with salt Levelling Rinse aid... -
Page 3: Important Safety Information
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. -
Page 4: Description Of The Appliance
Description of the appliance Water hardness adjustment Levelling spacers Upper basket stop Salt container Large filter Detergent dispenser Control panel Rating plate Rinse aid dispenser 10. Central filter 11. Lower spray arm 12. Upper spray arm 13. SID detergent dispenser 14. -
Page 5: Before Use
Before use Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. -
Page 6: Filling With Salt
Filling with salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme). -
Page 7: Rinse Aid
Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. -
Page 8: Using Your Appliance
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the UI22 dishes. -
Page 9: The Upper Basket
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the fold-down cup racks so that water can reach all surfaces. Glasses with long stems can be placed upside down in the raised cup racks. -
Page 10: Use Of Detergent
Use of detergent Only use detergents specifically designed for use in dishwashers. If using powder detergents proceed as follows: Min = 15 g Max = 30 g 1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent. As all detergents are not the same, you should consult the instructions on the packet. -
Page 11: Hints And Tips
Hints and tips To save energy Items not suitable for dishwashers Place dishes in the machine immediately after every meal and wait until the dishwasher is full before The following items should not be washed in washing. the dishwasher (unless they are sold as If necessary run the Rinse and Hold programme (see dishwasher proof): "Washing Programmes"... -
Page 12: Washing Programmes
Washing programmes Programme Starting position of Required Cycle description Degree of soil the programme pushbuttons selector type of load Hot prewash Heavy soil. Main wash up to 70°C Intensive Crockery, cutlery, 2 cold rinses 70°C pots and pants 1 hot rinse On/Off Drying Cold prewash... -
Page 13: Operating Sequence
Operating sequence Check the filters Start the programme Ensure they are clean and properly positioned Depress the On/Off pushbutton. (see "Maintenance and cleaning"). The On/Off indicator light will come on and the machine will start. If you wish to interrupt the washing Check that there is rinse aid programme at any time press this button again. -
Page 14: Maintenance And Cleaning
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°C wash programme without dishes using detergent. Cleaning the central filter (After each wash) Scraps of food may accumulate in the drain filter (A) -
Page 15: External Cleaning
Check that the SID is not clogged with detergent residue. If necessary rinse it under running water after having removed it from the basket by twisting it anticlockwise and pulling it upwards. Fasten it back onto the support by turning it clockwise. Never use your dishwasher without the SID dispenser. -
Page 16: Something Not Working
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Symptom Solution The machine will not start The door has not been properly closed. -
Page 17: Protection Against Flooding
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Protection against flooding In order to prevent water floods, the machine has been Prod.No. -
Page 18: Hints For Test Centres
Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Test standard EN 50242 Reference programme: Bio 50°C with prewash Load: 12 standard place settings Rinse aid selector: position 5 Detergent dosage :... -
Page 19: Installation Instructions
Installation instructions Remove all packaging before positioning the Any electrical work required to install machine. this appliance should be carried out by a If possible, position the machine next to a water tap qualified electrician or competent and a drain. person. -
Page 20: Water Outlet Hose Connection
Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. Hooked over the edge of the sink using the special curved plastic guide provided. -
Page 21: Adjusting The Worktop
Adjusting the worktop You can move the worktop forward or backward by 25 mm in order to align the machine with other kitchen units. Simply unscrew the two rear retaining screws, move the top to the required position and then retighten the screws.