Page 2
Warranty Card Certificate, on the back of which are written the relative conditions. Please fill in the necessary details on the Card Certificate and send it to the Zanussi Centre relative to the area in which the appliance is to be installed, within twenty days of the date of purchase. (See list of Zanussi network centres).
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
Contents For the user For the installer Important safety information Installation instruction Technical specifications Guide to use the instruction book Positioning Description of the appliance Levelling Adjusting the worktop The control panel Fitting under a counter Before use Fitting a decor panel on the door Setting the water softener Water supply connections Rinse aid...
Description of the appliance Worktop Water hardness adjustment Levelling spacers Upper basket Upper basket stop Upper spray arm Large filter Lower spray arm Salt container Central filter Detergent Lower dispenser basket Cutlery basket Rating plate Control panel Rinse aid dispense IN15 PDA01GB...
The control panel 6. Programme selector dial 1. On/Off indicator light To select a programme, push the programme selector dial in to make it pop out. Then turn it 2. On/Off pushbutton clockwise, making sure that the programme letter you wish to select is in line with the By depressing this button the machine starts programme marker on the control panel.
Before use Before using your dishwasher for the first time: ensure that the electrical and water connections comply with the installation instructions remove all packaging from inside the appliance set the water softener fill the salt container fill the rinse aid dispenser. Setting the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the...
Filling with salt If your water is "level 0" it is already soft and therefore there is no need to use salt. Salt must be used from level 1 upward. Only use salt specifically designed for use in dishwashers. Other types of salt may reduce the efficiency of the softener.
Rinse aid Rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
Use of detergent Only use detergents specifically designed for use in dishwashers. To fill the dishwasher with detergent proceed as follows: Open the dispenser lid by pulling the catch (D). Add the detergent according to the recommendations in the programme chart. As all detergents are not the same, you should also consult the instructions on the packet specially for tablets.
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes.
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses; Glasses with long stems can be placed upside down in the raised cup racks. Larger plates (dinner plates up to 24 cm in diameter) must be loaded in the front part of the upper basket.
Hints and tips To save energy Items not suitable for dishwashers: The following items should not be washed in Place dishes in the machine immediately after the dishwasher (unless they are sold as every meal and wait until the dishwasher is full dishwasher proof): before washing.
Washing programmes Starting Required Recommended quantity Programme Cycle Degree of soil of detergent position of the pushbuttons description on the in the programmer type of load dispenser dispenser NORMAL WITH Normal soil. Cold prewash PREWASH Crockery, cutlery Main wash up to 65°C 30 g 1 cold rinse pots and pans...
Operating sequence Check the filters Start the programme Ensure they are clean and properly Depress the On/Off button. positioned (see cleaning instructions). The On/Off indicator light will come on and the machine will start. If you wish to interrupt the wash Check that there is rinse aid programme at any time press the button and salt...
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°C wash programme without dishes using detergent. Cleaning the central filter (After each wash) Scraps of food may accumulate in the drain filter...
External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc..). Prolonged periods of non-operation If you are not using the machine for any period of time you are advised to: Unplug the appliance and then turn off the water;...
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Symptom Solution The machine will not start The door has not been properly closed.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Service and spare parts Prod.No.
Installation instruction Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Technical specifications DIMENSIONS Width...
Adjusting the worktop You can move the worktop forward or backward by 25 mm in order to align the machine with other kitchen units. Simply unscrew the two rear retaining screws, move the top to the required position and then retighten the screws.
Water supply connections This dishwasher may be fed with either hot (max. 60°C) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot.
Water outlet hose connection The end of the drain hose can be connected in the following ways: To the sink outlet siphon, securing it if necessary with a clip. Hooked over the edge of the sink using the special curved plastic guide provided. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.