Related Manuals for Zanussi ZFT 140
Summary of Contents for Zanussi ZFT 140
- Page 1 KÜHLSCHRANKE REFRIGERATEURS KOELKASTEN REFRIGERATORS KYLSKÅP JÄÄKAAPPI KØLESKAB ZFT 140 - ZFC 140 T BEDIENUNGSANLEITUNG MODE D’EMPLOI GEBRUIKSAANWIJZING INSTRUCTION BOOKLET BRUKSANVISNING KÄYTTÖOHJE BRUGSANVISNING 2222 606-51...
-
Page 2: General Safety
WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. -
Page 3: Table Of Contents
CONTENTS Installation Positioning Cleaning the interior Door reversibility Aligning the refrigerator top with the other kitchen units Building the appliance in under a worktop Electrical connection Technical specification Operation - temperature regulation Storing chilled foods Movable wire shelves Positioning the door shelves Ice cube production Defrosting Maintenance... -
Page 4: Installation
INSTALLATION If this model, equipped with a magnetic door lock, replaces an old appliance with a catch, ensure that the latter cannot be used before discarding it to prevent children being trapped inside. Positioning The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. -
Page 5: Cleaning The Interior
Important It is essential that the appliance be connected to an efficient earth tap. For this purpose the supply cable plug incorporates a special earth contact. If the sockets of your domestic wiring system are not earthed, have the appliance connected to a separate earth wire by a qualified electrician in accordance with existing safety regulations. -
Page 6: Door Reversibility
Door reversibility Fig. 2 The appliance must be unplugged before starting work. To reverse the opening direction of the door, proceed as follows: Remove the bottom hinge (5). Remove the door (4). Unscrew pin (2) from hinge (1) and replace it on the opposite side. -
Page 7: Building The Appliance In Under A Worktop
Building the appliance in under a worktop Fig. 3 This appliance can also be built in under the worktop min 137cm of your kitchen units. To do this, proceed as follows (Fig. 2): remove screws which secure the top to the rear brackets and front hinges;... -
Page 8: Use
Operation - temperature regulation Storing chilled foods Turn the thermostat dial clockwise to the required The refrigerator compartment is suitable for chilling position (beyond the « O » position); the intermediate food and drinks. setting is generally the most suitable. For best results, it is important to follow the rules The temperature is automatically regulated;... -
Page 9: Movable Wire Shelves
Movable wire shelves Fig. 5 The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. D040 Fig. 6 Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be adjusted in height. -
Page 10: Maintenance
MAINTENANCE Periods of non-use Unplug the appliance before carrying out any maintenance operation. If you are not using the appliance for any length of time, the following precautions should be taken: Periodic cleaning unplug the appliance; Clean the inside with warm water and bicarbonate of take all food out;...