YOUR NEW WASHING MACHINE This new washing machine meets all Environment protection requirements for a modern washing of laundry with reduced consumption of water, energy and Packaging recycling detergent. The temperature selector dial allows you to Materials marked with the symbol are choose personally the suitable washing recyclable.
IMPORTANT INFORMATION It is important that this instruction book be kept with the appliance for future reference. If you sell or give the appliance away, make sure that the book is passed to the new owners so that they can familiarise themselves with its operation and relevant warnings.
INSTALLATION Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses.
Water inlet Connect the water inlet hose to a tap with a 3/4" thread after having inserted the small filter “A” supplied with the machine. The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no P0003...
Control panel 1 Detergent dispenser drawer 5 Temperature selector dial Turn this dial to select the washing temperature. 2 Half load button Position = cold wash. Select this button to reduce water consumption 6 Operating pilot light on the rinse cycle when washing a half load of cottons or linens.
Washing hints Washing a maximum load makes the most efficient use of water and energy. Sorting the laundry For heavily soiled laundry, reduce the load size. Follow the wash code symbols on each garment Laundry weights label and the manufacturer’s washing instructions.
Lipstick: moisten with acetone as above, then Quantity of detergent to be used treat stains with methylated spirits. Remove any The type and quantity of detergent will depend residual marks from white fabrics with bleach. on the type of fabric, load size, degree of soiling Red wine: soak in water and detergent, rinse and hardness of the water used.
International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95°C 60°C 40°C 30°C Hand wash Do not...
Energetic programmes for cotton and linen Maximum load: 3.5 kg Rated load: 3 kg Possible Progr. Temp. Type of laundry Cycle description options Prewash Whites Wash at 60°-95°C 60°-95° with prewash 4 rinses (heavy soiled) Long spin Whites Wash at 60°-95°C 60°-95°...
Page 13
Gentle programmes for synthetics, mixed fibres, delicates woollens Maximum load: 1 kg, woollens: 0.7 kg Possible Progr. Temp. Type of laundry Cycle description options Prewash Synthetics Wash at 30°-60°C 30°-60° with prewash 3 rinses (heavy soiled) Stop with water left in the drum Synthetics Wash at 30°-60°C 30°-60°...
Operating sequence Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
6. Select the programme and start it Turn the programme selector dial clockwise to the required wash programme and pull it outwards: the operating pilot light comes on and the machine starts to operate. P0217 P0218 7. At the end of the programme The machine stops automatically, the operating pilot light goes out.
MAINTENANCE 1. Bodywork Clean the outside of the machine with warm water and a neutral, non-abrasive household detergent. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork.
4. The drain pump he machine is equipped with a self-cleaning pump which does not need any maintenance. 5. Emergency emptying out If the water is not discharged proceed as follows to empty out the machine: pull out the plug from the power socket; close the water tap;...
SOMETHING NOT WORKING Problems which you can resolve yourself Problem Possible cause The machine does not start up: Check that the door is firmly closed. Check that the machine is plugged in and that there is power at the socket. Check that the main fuse has not blown.
Problem Possible cause The machine vibrates or is noisy: Check that all the transit bolts and packing have been removed. Check that the machine is not resting against anything. Check that the support feet are resting firmly on the ground. Check that the laundry is evenly distributed in the drum.