Knuckle Shaft And Steering Shaft Lubrication; Wheel Removal; Wheel Installation - Yamaha RAPTOR YFM50S Owner's Manual
Hide thumbs
Also See for RAPTOR YFM50S:
- Owner's manual (350 pages) ,
- Service manual (236 pages) ,
- Assembly manual (33 pages)
Table of Contents
Advertisement
EBU01220
Knuckle shaft and steering shaft lubrication
Lubricate the pivot points using a grease gun.
Recommended lubricant:
Lithium-soap-based grease
(all-purpose grease)
1
1. Grease nipple
EBU01112
Wheel removal
1. Loosen the wheel nuts.
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
Front
1. Wheel nut (
EBU07390
Wheel installation
When installing the wheel, reverse the removal
procedure.
1
NOTE:
The arrow mark on the tire must point toward
the rotating direction of the wheel.
Tighten the wheel nuts to the specified torque.
Wheel nut torque:
8-22
Rear
q
q
×
4)
2. Wheel nut (
Front: 28 Nm (2.8 m0kgf, 20 ft0lbf)
Rear: 28 Nm (2.8 m0kgf, 20 ft0lbf)
w
×
3)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
