Page 1
Model No. TX-L32X5E Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only.
Page 2
This TV may not work correctly with CI module that is not approved by the service provider. Additional fees may be charged depending on the service provider. The compatibility with future services is not guaranteed. Check the latest information on the available services at the following website. (English only) http://panasonic.jp/support/global/cs/tv/...
Contents Transport only in upright position Panasonic does not guarantee operation and performance Be Sure to Read of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/ or performance from usage of such other maker’s peripheral Safety Precautions ···············································4...
Using an unapproved pedestal or other fixtures may away from this product make the TV unstable, risking injury. Be sure to ask at all times your local Panasonic dealer to perform the setup or installation. Use approved pedestals (p. 7) / wall-hanging brackets (p. 6).
Page 5
Caution When cleaning the TV, remove the mains Do not block the rear air vents plug Adequate ventilation is essential to prevent failure of electronic components. Cleaning an energised TV may cause electric shock. Ventilation should not be impeded by covering the Remove the mains plug from the wall ventilation openings with items such as newspapers, socket when the TV is not in use for a...
Warning Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer. Always be sure to ask a qualified technician to carry out set up. Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
Page 7
Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic dealer immediately.
Page 8
Preventing the TV from falling over Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the installation surface. The place where the pedestal is to be fixed should be thick enough and made of hard material. Screw (not supplied) Diameter: 3 mm Length: 25 - 30 mm...
Identifying Controls Remote Control Confirms selections and choices. OFF TIMER INPUT Press after selecting channel positions to quickly change channel. AUDIO ASPECT N SURROUND Displays the Channel List. [Option Menu] (p. 17) EXIT Easy optional setting for viewing, sound, etc. Coloured buttons (red-green-yellow-blue) Used for the selection, navigation and operation of...
Page 10
Indicator / Control panel Function select [Volume] / [Backlight] / [Contrast] / [Brightness] / [Colour] / [Sharpness] / [Tint] (NTSC signal) / [Bass]
/ [Treble]
/ [Balance] / [Auto Tuning] (p. 32) [Music] or [Speech] mode in the Sound Menu Channel Up / Down, Value change (when using the F button), Switching the TV on (press either button for about 1 second when in Standby mode)
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. Terminals AV1 (SCART) (p. 12) CI slot (p. 37) HDMI 3 terminal (p.
Page 12
AV devices Player Player HDMI cable DVD Recorder / VCR Terrestrial aerial RF cable Cable SCART cable cable DVD Recorder / DVD Recorder / VCR and Set top box SCART cable RF cable Terrestrial aerial HDMI cable RF Cable Set top box DVD Recorder / SCART cable Note...
Auto Setup Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer. Please complete connections (p. 11, 12) and settings (if necessary) of the connected equipment before starting Auto Setup.
Page 14
Select [Home] Select [Home] viewing environment to use in your home environment. Please select your viewing environment. change Home Shop confirm [Shop] viewing environment (for shop display only) [Shop] viewing environment is the demonstration mode to explain main features of this TV. Select [Home] viewing environment to use in your home environment.
Hold Freeze / unfreeze picture HOLD Display the selectable settings for the current status Check or change the current status instantly 7R FKDQJH OPTION VHOHFW FKDQJH [Multi Audio] '9% [Subtitle Language] '9% [MPX] $QDORJXH PRGH 6HOHFWV EHWZHHQ DOWHUQDWLYH ODQJXDJH 6HOHFWV WKH ODQJXDJH LQ ZKLFK 6HOHFWV PXOWLSOH[ VRXQG PRGH LI IRU VRXQG WUDFNV LI DYDLODEOH VXEWLWOHV VKRXOG DSSHDU LI DYDLODEOH...
Page 18
Aspect Change the aspect ratio (image size) (QMR\ YLHZLQJ WKH LPDJH DW LWV RSWLPXP VL]H DQG DVSHFW ASPECT 3URJUDPPHV XVXDOO\ FRQWDLQ DQ ³$VSHFW &RQWURO 6LJQDO´ :LGHVFUHHQ VLJQDO HWF DQG WKH 79 ZLOO FKRRVH WKH DVSHFW UDWLR DXWRPDWLFDOO\ DFFRUGLQJ WR WKH ³$VSHFW &RQWURO 6LJQDO´ S If you would like to change the aspect ratio manually Display Aspect Selection list While the list is displayed,...
Viewing Teletext 7HOHWH[W VHUYLFHV DUH WKH WH[W LQIRUPDWLRQ SURYLGHG E\ WKH EURDGFDVWHUV 7KH IHDWXUHV PD\ YDU\ GHSHQGLQJ RQ WKH EURDGFDVWHUV What is FLOF (FASTEXT) mode? ,Q )/2) PRGH IRXU GLIIHUHQWO\ FRORXUHG VXEMHFWV DUH VLWXDWHG DW WKH ERWWRP RI WKH VFUHHQ 7R DFFHVV PRUH LQIRUPDWLRQ DERXW RQH RI WKHVH VXEMHFWV SUHVV WKH DSSURSULDWH FRORXUHG EXWWRQ 7KLV IDFLOLW\ HQDEOHV IDVW DFFHVV WR LQIRUPDWLRQ RQ WKH VXEMHFWV VKRZQ What is TOP mode? LQ FDVH RI 723 WH[W EURDGFDVWLQJ...
Page 21
FULL / TOP / BOTTOM JUHHQ 723 %27720 1RUPDO )8// ([SDQG WKH %27720 KDOI ([SDQG WKH 723 KDOI View sub page View sub page (Only when Teletext is more than one page) 7KH QXPEHU RI VXE SDJHV YDULHV GHSHQGLQJ RQ WKH $SSHDUV DW WRS RI WKH EURDGFDVWHUV XS WR SDJHV VFUHHQ...
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu Displays the functions that can be set (varies according to the input signal) Select the menu select Main Menu Picture access Sound...
Menu list Menu Item Adjustments / Configurations (alternatives) Selects your favourite picture mode for each input [Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game] [Dynamic]: Improves contrast and sharpness for viewing in a bright room. [Normal]: Normal use for viewing in a normal lighting condition. [Cinema]: Improves the performance of contrast, black and colour reproduction for watching movies in a darkened room.
Page 26
Menu Item Adjustments / Configurations (alternatives) Selects your favourite sound mode [Music] / [Speech] / [User] The selected mode affects all input signals. [Music]: Improves sound quality for watching music videos, etc. [Speech]: Improves sound quality for watching news, drama, etc. In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and Mode those settings will be stored for each mode.
Page 27
Menu Item Adjustments / Configurations (alternatives) Selects multiplex sound mode (if available) [Stereo] : Use this normally [Mono] : When stereo signal cannot be received [M1] / [M2] : Available while mono signal is transmitted For Analogue mode SPDIF : A standard audio transfer file format Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and HDMI2 (ARC function) terminals [Off] / [Dolby digital] / [PCM] [Dolby digital]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are...
Page 28
Standby. [Off] / [On] Power off Link A Panasonic DVD Recorder will not turn off if it is still in the Rec mode. The TV remains on even if all the HDMI connected equipment are turned off.
Page 29
Menu Item Adjustments / Configurations (alternatives) Selects the preferred language for DVB teletext service (depending on the Preferred Teletext broadcaster) Selects teletext language [West] / [East1] / [East2] Teletext Character [West] : English, French, German, Greek, Italian, Spanish, Swedish, Turkish, etc. [East1] : Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian, etc.
Page 30
Menu Item Adjustments / Configurations (alternatives) Sets the duration of time that the TV will remain on when no operation is performed [Off] / [2] / [4] (hours) Auto Standby Automatic input switching with the connected equipment affects this function and time-count will be reset.
Retuning from Setup Menu Automatically retune the channels received in the area. This function is available if channel tuning is already performed. Only the selected mode is retuned. All the previous tuning settings are erased. If Child Lock PIN number (p. 36) has been set, the PIN number is required. If tuning has not been done completely [Analogue Manual Tuning] (p.
Page 32
Cable: Automatic Channel Search Status: Scanning... Analogue Channels: 0 Digital Channels: 0 Scan Scan Mode Advance Frequency (KHz) 306000 Auto Network ID Scan Antenna: Automatic Channel Search Searching channels... Analogue : 1 Digital : 0 Scan When the operation is completed, the channel at the lowest position will be displayed. Auto setup using the buttons on the TV For Auto Setup, using the buttons on the TV (p.
Tuning and Editing Channels You can retune channels or make your favourite channel lists, skip unwanted channels, etc. Select the mode (p. 15) Display the menu and select [Setup] select Main Menu Picture access Sound Setup Select [Tuning Menu] Setup Menu select Tuning Menu Access...
Set Analogue channel manually [Analogue Manual Tuning] Set Analogue channel manually after Automatic Channel Search. Example: Antenna Enter the frequency to start scanning Analogue Manual Tuning Searching channels. Start Frequency (MHz) 48.00 Scan up Scan down Select the scanning method select access [Scan up]: Scans ascendingly from the entered frequency to higher...
Page 35
Sort channels [Sort] You can sort channels. To swap the channel position (if available) Swap : selected select select Sort Analogue Analogue access access : unselected Digital Digital To change page (page up) To change page (page down) To select To exit (red) (green)
Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears. Enter the PIN number to watch. Display the menu and select [Setup] select Main Menu access Setup...
Although CI module may enable you to view some services, this TV does not guarantee all services (e.g. encrypted pay-TV channels). Please use only the approved CI module by the broadcaster. Consult your local Panasonic dealer or broadcasters for more information and conditions of the services. Rear of the TV Caution...
Shipping Condition Resets the TV to its original condition, i.e. no channels tuned in. All settings are reset (channels, picture, sound settings, etc.). To retune TV channels only, e.g. after moving house “Retuning from Setup Menu” (p. 31 - 32) Display the menu and select [Setup] select Main Menu...
Updating the TV Software A new version of software may be released for download to enhance the performance or operations of the TV. If there is an update available, a notification message is displayed when the channel has the update information. To download (Press the EXIT button not to download) You can update new software automatically or update manually.
Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card and USB Flash Memory. VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV screen by simply inserting into the SD Card slot.
Page 41
Starting Media Player Insert the SD Card or USB Flash Memory to the TV (p. 40) Start Media Player You can also start by pressing following button. “Watching External Inputs” (p. 22) Select the device to access Drive Select select EXIT Select RETURN...
Change the contents You can switch to the other mode of Media Player from the thumbnail view. The mode can be switched in the current device. While the thumbnail is displayed, Select the contents display the contents selection Contents Select EXIT select (blue)
[View Select] - Change from thumbnail view to folder view Display the view selection (green) Folder view The thumbnail of folders in the SD Card or USB Flash Memory will be displayed. Select a folder to view its contents select access To return to the thumbnail of all photos (green)
Page 44
Movie mode Supported file format (p. 51, 52) The thumbnail of video titles in the SD Card or USB Flash Memory will be displayed. Example: Thumbnail - [Title view] To play back the selected title Media Player Video Title view Select the title Start playback Trip1...
Video Setup Setup the settings for Movie mode. Menu items and selectable options vary depending on the content. Display the option menu Select [Video Setup Menu] in the thumbnail view OPTION Option Menu Video Setup Menu Video Setup Menu Repeat access Menu Item...
Music mode Supported file format (p. 52) The thumbnail of music folders in the SD Card or USB Flash Memory will be displayed. Example: Thumbnail - [Folder view] To play back the selected folder Media Player Music Folder view Select the folder Start playback My Music_1 My Music_2 My Music_3...
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the basic connection (p. 11 - 12), the table (p. 49), and the specifications (p. 58). To record / playback Terrestrial aerial RF cable...
Page 48
To listen with speakers Optical digital audio cable Amplifier with speaker system To enjoy the sound from the external equipment in multi-channel sound (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For the connections, read the manuals of the equipment and amplifier.
Page 49
Types of connectable equipment to each terminal Terminal AV2 Features To record / playback videocassettes / DVDs (VCR / DVD Recorder) To watch satellite broadcasts (Set top box) To watch DVDs (DVD Player) To watch camcorder images (Video camera) To play games (Game equipment) To use amplifier with speaker system : Recommended Connection 1: Use HDMI1 for automatic input switching.
Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 18) Aspect Control Signal The aspect will switch to the appropriate 16:9 or 14:9 widescreen ratio. This function will work in any aspect mode. Aspect Control Signal Control signal Input terminal...
Page 51
.wmv LPCM Video Ver. 9 Dolby Digital H.264 BP/MP/HP .f4v Dolby Digital This TV supports this container MPEG1 Plus .m4v recorded by Panasonic products. For MPEG2 details, read the manual of the products. HE-AAC .mp4 MPEG4 SP/ASP MPEG Audio...
Page 52
Electrical interference, static electricity, or erroneous operation may damage the data or device. Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV. Panasonic is not liable for any deterioration or damage of recorded data. USB connection It is recommended to connect the USB Flash Memory directly to the TV’s USB port.
Page 53
HDMI connection HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment with an HDMI or DVI output terminal, such as a DVD player, a set top box or game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
Page 54
SCART and HDMI terminal information AV1 SCART terminal (RGB, VIDEO) Socket Earth 21 20 CVBS in (video) CVBS out (video) 19 18 RGB status earth CVBS earth 17 16 Status RGB Red in 15 14 Earth Red earth 13 12 -- Green in 11 10 Q-Link data Green earth 9...
Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Block noise, frozen or disappearing image occurs in DVB mode / White spots or shadow image (ghosting) occurs in Analogue mode / Some channels cannot be tuned Check the position, direction and connection of the aerial.
Page 56
TV to standby mode with Standby On / Off switch, then turn it on again. message appears Check foreign objects are not inside the USB port. Follow the message’s instructions. An error message appears If the problem persists, contact your local Panasonic dealer or the authorised service centre.
DVB and the DVB logos are trademarks of the DVB Project. SDHC Logo is a trademark of SD-3C, LLC. “AVCHD” and “AVCHD Progressive” are trademarks of Panasonic Corporation and Sony Corporation. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Specifications Model No. TX-L32X5E Power source AC 220-240 V, 50 / 60 Hz Panel LED LCD panel 761 mm × 517 mm × 230 mm (With Pedestal) Dimensions (W × H × D) 761 mm × 463 mm × 53 mm (TV only) 10.5 kg Net (With Pedestal)
Page 60
Declaration of Conformity (DoC) Authorized Representative : Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Customer’s Record The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.