Panasonic WV-PS11B Operating Instructions Manual
Camera drive unit
Hide thumbs
Also See for WV-PS11B:
- Operating instructions manual (12 pages) ,
- Operating instructions manual (12 pages)
Related Manuals for Panasonic WV-PS11B
Summary of Contents for Panasonic WV-PS11B
- Page 1 Camera Drive Unit WV-PS11B Before attempting to connect or operate this product, please read these instructions completely.
- Page 2 If you lose the fuse cover the plug must not be used until a replacement SHOCK, DO NOT REMOVE COVER (OR cover is obtained. BACK), NO USER SERVICEABLE PARTS A replacement fuse cover can be purchased from your local Panasonic INSIDE. Dealer. REFER SERVICING TO QUALIFIED SERVICE IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET PERSONNEL.
- Page 3 For U.K. Caution: Before attempting to connect or operate this product, IMPORTANT please read the label on the bottom. The wires in this mains lead are coloured in accordance with the following code. Green-and-yellow: Earth Blue: Neutral Brown: Live We declare under our sole responsibility that the product to As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your which this declaration relates is in conformity with the stan-...
-
Page 4: Table Of Contents
CONTENTS PREFACE PREFACE ..............2 The Panasonic Camera Drive Unit WV-PS11B is spe- FEATURES ..............2 cially designed to drive specified cameras such as WV- PRECAUTIONS ............3 BP70 or WV-CP100. MAJOR OPERATING COMPONENTS This simple system is specially designed for surveil- AND THEIR FUNCTIONS .......... -
Page 5: Precautions
PRECAUTIONS • Do not drop any metallic parts through slots. • Do not block the ventilation opening or slots on the This action could damage the appliance perma- cover to prevent the appliance temperature from nently. Turn the power off immediately and refer rising. -
Page 6: Major Operating Components And Their Functions
MAJOR OPERATING COMPONENTS AND THEIR FUNCTIONS POWER CAMERA VIDEO AUDIO VD/SYNC VD/SYNC SIGNAL CAUTION USE WITH SPECIFIED EQUIPMENT SEE ITS MANUAL BEFORE CONECTING. q Power On/Off Switch (POWER, ON/OFF) r Audio Output Connector (AUDIO OUT) This switch is used to turn the camera drive unit The audio signal of the specified camera is provid- and connected specified camera power on or off. -
Page 7: Connections
• Connect only a specified camera, WV-BP70, WV-CF20 or WV-CP100. If another camera is connected, the cam- era drive unit will not operate due to activation of the protection circuit. <Single Camera> Camera Drive Unit WV-PS11B Monitor CAMERA IN CAMERA... - Page 8 <Multi Camera System with External SYNC Operation> Monitor Camera Drive Unit WV-PS11B CAMERA IN CAMERA VIDEO AUDIO VD/SYNC VD/SYNC SIGNAL VIDEO OUT Camera VD/SYNC Monitor CAMERA IN VIDEO VD/SYNC CAMERA AUDIO VD/SYNC Camera Drive Unit WV-PS11B SIGNAL VIDEO OUT Camera...
- Page 9 1. Connect the coaxial cable between the camera Note: and CAMERA IN connector of the camera drive If the length of the coaxial cable between the unit. The approximate maximum cable length is as camera drive unit and the video monitor follows: exceeds the distance shown in the above table, a cable loss compensator should be...
- Page 10 • Composite Sync: 4 V[p-p] /75 Ω Relation between VD/SYNC IN and VD/SYNC The signal from the VD/SYNC OUT connector differs according to the connected camera and the signal sup- plied to the VD/SYNC IN connector of this unit. The signal supplied from VD/SYNC OUT is as folllows: •...
-
Page 11: Specifications
SPECIFICATIONS Power Source: 220 - 240 V AC 50 Hz Power Consumption: Approx. 16 W 1.0 V[p-p] / 75 Ω, BNC Connector Camera Input: 1.0 V[p-p] / 75 Ω, BNC Connector Video Output: –10 dB / 600 Ω unbalanced, RCA pin jack Audio Output: Camera Power Supply: Regulated current multiplex method (310 mA) - Page 12 Matsushita Electric Industrial Co., Ltd. Central P.O. Box 288, Osaka 530-91, Japan N1096-0 YWV8QA4374AN Printed in Japan N 19 Gedruckt in Japan Imprimé au Japon Impreso en Japón...