hit counter script
JVC VN-T216U Instructions Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. Security Camera
  5. VN-T216U
  6. Instructions manual

JVC VN-T216U Instructions Manual

Fixed hd ip dome camera
Hide thumbs Also See for VN-T216U:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Quick Manual
FIXED HD IP DOME CAMERA
VN-T216U
Thank you for purchasing this product.
Before operating this unit, please read the "INSTRUCTIONS", "QUICK
GUIDE" and "SAFETY PRECAUTIONS" carefully to ensure the best
possible performance.
INSTRUCTIONS
LST1364-001C

Advertisement

Table of Contents
loading

Related Manuals for JVC VN-T216U

Summary of Contents for JVC VN-T216U

  • Page 1 FIXED HD IP DOME CAMERA VN-T216U INSTRUCTIONS Thank you for purchasing this product. Before operating this unit, please read the "INSTRUCTIONS", "QUICK GUIDE" and "SAFETY PRECAUTIONS" carefully to ensure the best possible performance. LST1364-001C...

  • Page 2: Table Of Contents

    Contents Contents of this manual ..................2 Cautions and Warnings ..................2 FCC Compliance Statement ................3 AVC and MPEG-4 Visual Patent Portfolio License ..........4 AVC Patent Portfolio License ................4 MPEG-4 Visual Patent Portfolio License ............4 1 About This Document ....................5 Overview of Contents ..................5 2 Product Overview ......................6 Camera Overview ..................6 Camera Parts and Definitions ................6...

  • Page 3: Contents Of This Manual

    Contents of this manual  Windows, Internet Explorer, DirectX and FAT32 are registered trademarks of Microsoft Corporation in the U.S.  Pentium is a registered trademark of Intel Corporation in the U.S.  NVIDIA and GeForce are trademarks or registered trademarks of NVIDIA Corporation in the U.S.

  • Page 4: Fcc Compliance Statement

    WEEE (Waste Electrical and Electronic Equipment). Correct disposal of this product (applicable in the European Union and other European countries with separate collection systems). This product should be disposed of, at the end of its useful life, as per applicable local laws, regulations, and procedures.

  • Page 5: Avc And Mpeg-4 Visual Patent Portfolio License

    AVC and MPEG-4 Visual Patent Portfolio License AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO...

  • Page 6: About This Document

    1 About This Document This INSTRUCTIONS is designed to be a reference tool for the installation and operation your system including the camera’s features, functions and detailed explanation of the menu tree. Overview of Contents This document contains the following chapters: ...

  • Page 7: Product Overview

    2 Product Overview Camera Parts and Definitions Camera Overview 4.92"(125mm) 0.70"(18mm) 0.62"(16mm) 3.25"(82.5mm) 3.64"(92.5mm) 4.92"(125mm) Camera Parts and Definitions The dome camera is fully integrated enclosure with camera and lens.

  • Page 8: Routine Maintenance

    1 Camera bottom case 4 Loosen the screw to take off camera housing 2 Tilt adjustment bracket and 5 Camera housing thumbnuts, notches(X2) 3 Inner liner 6 Dome cover Routine Maintenance  The dome cover is an optical part. Use a soft, dry cloth to remove any fingerprints or dust.
  • Page 9 Au. IN Audio in Au. OUT Audio out AL IN Alarm in Alarm out AL OUT DC12V IP camera can operate on DC12V / AC24V AC24V For DC power supply use, make sure the popularity is Caution correct to avoid malfunction and/ or camera change.

  • Page 10: Installation And Connections

    3 Installation and Connections This chapter describes the installation and connection of the camera that can deliver video images and audio in real time using the Internet or an intranet. Before You Begin Please read this INSTRUCTIONS carefully before you install and operate the camera.

  • Page 11: Operating Precautions

    When using AC24V power supply, do not connect the AC24V cable to commercial power supply. If it is connected by mistake, the internal circuit may be damaged. Do not use the camera and make sure to send it to the nearest JVC dealer for inspection. Real time clock ...

  • Page 12: Camera Installation

    Disclaimer  We will not be responsible for any inconveniences or disturbances caused in the event of privacy invasion as a result of camera footages of this product. Others  Because the camera controls auto exposure by shutter speed, flicker can be shown by fluorescent light. To reduce the flicker, please select PAL mode if the power is 50Hz, or NTSC mode if the power is 60Hz.

  • Page 13: Connecting The Power Wiring

    Connecting the Power Wiring Connect the power supply cable to the power connectors. If using a DC supply, make sure the polarity is correct. Caution Incorrect connection may cause malfunction and / or damage to the camera. Connectors and field wiring terminals for external Class 2 circuits provided with marking indicating minimum Class Note of wiring to be used.

  • Page 14: Adjusting Zoom And Focus

    Adjusting Zoom and Focus  Loosen the zoom lever (D) / locking screw by turning it counterclockwise.  Rotate the zoom ring to achieve the desired image coverage.  Loosen the focus lever (E) / locking screw by turning it counterclockwise. ...
  • Page 15 To prevent the camera from falling off, ensure that it is connected to a firm place (ceiling slab or channel) using a Safety Wire (Fall Prevention Wire is not supplied). Pay also careful attention to the length, strength, wiring, and Warning material (insulating properties) of the fall prevention wire to be used.

  • Page 16: Locking The Camera

    Safety Wire (Fall Prevention Wire, not supplied) Locking the Camera  Use soft, lint -free cloth to wipe the dome cover clean and remove fingerprints.  Attach the inner liner and camera housing.  Turn the power on after you have installed the camera...

  • Page 17: Network Camera Diagram

    Network Camera Diagram Connection type 1: Connection type 2: Hardware/Software Requirements Computer Windows XP or Windows 7 as OS Internet Explorer Version 6.0-9.0 CPU: Intel Pentium 4 2.4 GHz or equivalent AMD Memory: 1G or above Display adapter Support DirectX9 for example NVIDIA GeForce 6 Series above ATI Mobility Radeon 9500 above.

  • Page 18: Connecting The Camera To A Personal Computer

    Command Prompt.) Type “Ping 192.168.0.2”. If the message “Reply from…” appears, it means the connection is done. 4. Start Internet Explorer and enter IP address: 192.168.0.2. A login window will appear. Enter the default user name: admin and password: jvc to log in. Figure 3-1 Log on Screen...
  • Page 19 5. Images of the camera can be viewed through Internet Explorer. Before viewing, follow these steps to enable the display. a. Enable Cookies as shown below:  In Internet Explorer, click Internet Options on the Tools menu.  On the Privacy tab, move the settings slider to Low or Accept All Cookies. ...
  • Page 21  Click【Tools】【Internet Options】【Security】【Custom level】  Modify the configuration of IE’s security setting as follow: 【Download signed ActiveX controls】 Prompt (recommended) 【Download unsigned ActiveX controls】 Prompt 【Initialize and script ActiveX not marked as safe for scripting】 Prompt...
  • Page 22 【Automatic prompting for ActiveX controls】 Enable 【Run ActiveX controls and plug-ins】 Enable 【Script ActiveX controls marked safe for scripting*】 Enable 6. Type your setting IP address into the browser. 7. Then you should be able to see the camera image screen.

  • Page 23: Overview Of Navigation And Controls

    4 Overview of Navigation and Controls Live View Live view is designed for general users to control the camera. In the left list it displays:  Full Screen: Set Full screen  One shot: take a picture from live view ...

  • Page 24: Image Parameters

    Image Parameters You can setup Basic Setting, Image Compression, Alarm, FTP, E-mail, SD. Recording and Audio for your network IP camera by clicking on network setting on setting menu. Basic Figure 4-1 Basic...
  • Page 25 Image Color Automatic Exposure Figure 4-2 Automatic Exposure Automatic Exposure controls the light intensity of picture. There are four types for adjustment. You can select Manual, AES (Automatic Electronic Shutter), Flicker-free 50Hz and Flicker-free 60Hz for the camera depending on your application conditions.
  • Page 26 Saturation Saturation describes the difference of a color from the gray of the same lightness. Increasing saturation deepens the colors of your images, making reds redder and blues bluer. You can adjust picture saturation level from 0 to 255. Figure 4-4 Brightness adjustment, Contrast, Saturation Shutter Speed Figure 4-5 Shutter Speed Set desired Shutter Speed from 1/25s to 1/10000s.
  • Page 27 Figure 4-7 AWB Set the white balance values to meet the environment condition for best color rendition. “ON”: The color of camera is automatically adjusted according to external lighting condition (ATW: Auto Tracking White Balance). “OFF”: Adjustable by user manually, this is useful for some specific conditions which AWB may be unaffordable to perform correctly.
  • Page 28 Sharpness Figure 4-10 Sharpness Increasing the sharpness value will sharpen the edges and small feature of camera images. You can set a Sharpness value for images from 0 to 255. Backlight Compensation(BLC) Figure 4-11 Backlight Compensation Users can choose to turn this function ON or OFF. Back Light Compensation is a function that achieves the brightness of whole area to an optimum image level.

  • Page 29: Compression

    Compression  Select Compression.  Configure the options as described in the table below.  Click Save.  Dual streams: Both Encoder No.1 & No.2 are available for selection.  Functions of MJPEG, MPEG-4 and H.264 are effective. The video signal sent to the Web-Client from the camera has a number of settings that can be edited which affects the video as it’s displayed in the Web-Client.
  • Page 30 Table below elaborates the above figure. Table 4-1 Compression Compression Item Function Choice Remark Encoder No.1 MJPEG Compression Set a default compression mode. MPEG4 Format H.264 1080P 720P 1080P is the highest resolution and, Resolution 4CIF QVGA is the lowest resolution. 1080p only support H.264.
  • Page 31 256K It’s optional only when constant bit 512K rate is chosen. Select the desired bit rate including 256K, 512K, 1M, 2M, Bit Rate 3M, 4M, 6M and 8M b/s. When resolution is not 1080P or 720P, 4M is the maximum. Select the GOP (Group of pictures) number from 1 to 30.If the number is bigger, recovery of the lost frames...
  • Page 32 The user interface of Encoder No.2 is as follows: Figure 4-14 Encoder No.2...
  • Page 33 Table below elaborates the above figure. Table 4-2 Compression Compression Item Function Choice Remark Encoder No.2 MJPEG MPEG4 Set H.264, MJPEG or MPEG4 as a Image Mode default compression mode. H264 no streaming 1) Encoder No.1: 720p; Encoder No.2: D1, 640x360, QVGA. 2) Encoder No.1: VGA, QVGA;...
  • Page 34 Bit Rate 256K 512K Select the desired bit rate including 256K,512K,1M,2M,3M,4M b/s. Select the GOP (Group of pictures) number from 1 to 30.If the number is bigger, recovery of the lost frames will be more difficult; If the number is smaller, it will increase the bite rate 1-30 obviously and aggravate the network load.
  • Page 35 Table 4-3 Compression correlations of resolution and stream...
  • Page 36 Table 4-4 Lower frame rate limitation for H.264 and MPEG4 When choosing CBR, some conditions will be disabled based on different resolution setting.   Bit Rate vs Frame Rate (Resolution=1080P, 720P) Frame rate Bit Rate 512K 256K Bit Rate vs Frame Rate(Resolution<=D1) Frame rate Bit Rate 512K...

  • Page 37: Mask Zone

    Mask Zone  Enable button “ON”, then click “Set Mask Zone” to start mask setting  Use mouse to drag a mask rectangle on the screen, click “OK” to complete the selection.  Click “Save” to enable the mask setting. Figure 4-15 Mask Zone Note: Max 4 masks can be set on the screen.

  • Page 38: Alarm

    Alarm External Digital Input 1 When alarm input is connected, the camera triggers an alarm only when the normal state (open or closed) changes. Connect external devices such as sirens or flashing lights to the alarm output connector to signal users of the camera that an alarm is activated.

  • Page 39: Sd Recording

    Figure 4-18 Alarm Output Figure 4-19 Output Hold Time Please click the “Save” button to save your settings. You can also click the left button “Reset to Default” to set all the data and options Note as defaults. SD Recording Confined SD recording priority: alarm >...
  • Page 40 Users can choose recording conditions between Event and Network Loss. When users select “Event”, 2 more selections will be effective and Recording Time can be selectable in 5s, 10s, 15s, 20s, 25s, 30s, 35s, 40s, 45s, 50s, 55s or 60s. SD Free Capacity It shows the free capacity of the SD card.

  • Page 41: E-Mail Notification

    E-mail Notification You can receive alarm and motion information by setting your E-mail account. Conditions Figure 4-21 Conditions You can choose the form of the E-mail Notification of Alarm and Motion, but if choosing “Motion”, should set Motion Detection as “on” in Alarm settings. And if choosing “Alarm”, should set Alarm Input as “Alarm Input”...
  • Page 42 5. TLS/START TLS: when select this item you can change the data beside it Figure 4-24 Choosing TLS/START TLS E-mail Server (SMTP): Enter your outgoing mail server (SMTP). E-mail User ID: Input your E-mail account ID number. Password: Input your E-mail account password. Password (Confirm): Confirm your E-mail password.

  • Page 43: Audio

    If “Send to Administrator” is set to “ON” when a motion happens, the E-mail server will always send a mail to the administrator. And E-mails can also be sent to multiple users when a motion occurs. Please click the “Save” button to save your settings. You can also click the left button “Reset to Default”...
  • Page 44 Please click the “Save” button to save your settings. You can also click the left button “Reset to Default” to set all the data and options Note as defaults. When enabled audio output to “ON”, there are audio issue of the sound is disconnected under a few part of Windows 7 environments.

  • Page 45: Network Settings

    Network Settings Basic Basic Figure 4-30 Network basic Network  IP Address: Input your IP address here when you select “Manual”.  Subnet Mask: Please use default number: 255.255.255.0. If the subnet mask is not properly configured, the camera may not be able to communicate with other devices on the network.

  • Page 46: Ftp Server

    ID>:<Password>@<ip-address> in Windows Explorer, then you will find the SD recording result. The original setting is ftp://admin:jvc@192.168.0.2 When you’re visiting the SD recording files, date and time of record refers to the folder’s and file’s name. Figure 4-31 FTP Sever Settings Please click the “Save”...

  • Page 47: Rtsp

    RTSP Authentication You should enter the Login ID, Password and Password (confirm) if select “ON”. Figure 4-32 Authentication Encoder No.1 & Encoder No.2 Encoder No.1 & Encoder No.2 Figure 4-33...

  • Page 48: Https

    Please choose desired options and value and remember to click “save” button to save all your settings. Note: RTSP URIs for Encoder No.1 & Encoder No.2 are: rtsp://(ip address):(port1)/ livestream rtsp://(ip address):(port2)/ livestream When you use Multicast, please set the Default Gateway on Network Note setting.

  • Page 49: User List

    ID and password controller. However, User1~5 are allowed to review the live picture only. Without authorization, any operation will be forbidden.  The default guest’s login name and password are “user” and “jvc”.  Enter a guest’s User ID in the User ID field. ...

  • Page 50: Date/Time

    Date/Time Set Display and Synchronization Mode Figure 4-39 Date and Time The user can choose Synchronization Mode here from three different types. Set Date and Time Manually Set up the camera’s date and time in the Set Date and Time Manually field. Figure 4-40 Set Date and Time Manually Set Date and Time by NTP Server 1.

  • Page 51: Update

    Select “ON” to activate the daylight-saving function if you are in a daylight saving time zone (effective for NTP mode only), and then choose the starting time ,ending time and time adjustment. Please click the “Save” button to save your settings. You can also click the left button “Reset to Default”...

  • Page 52: Set To Factory Default

    Figure 4-44 Video Type Note: Analog video output is not available. Import Configuration Settings This function is designed to upload configuration setting from the client computer to network cameras. Figure 4-45 Import Configuration Settings Export Configuration Settings This function is designed to export configuration settings to the client computer. Figure 4-46 Export Configuration Settings Set to Factory Default This function is designed to reset all configuration settings into factory default.

  • Page 53: Event Log

    Event Log Click the buttons to display the desired logbooks or to delete all logs. Figure 4-49 Log Browse This window is sample. Information FW version and MAC address will be shown. Figure 4-50 FW version and MAC address The displayed numbers are sample.

  • Page 54: Miscellaneous

    Miscellaneous Click the button. This camera contains free open source code. Figure 4-51 Miscellaneous Free Open Source Software Software information regarding these products, Model No. VN-T16, VN-T16U, VN-T216, VN-T216U, VN-T216VPRU - SOFTWARE LICENSE AGREEMENT - Important Notice concerning the Software The Software contained in this product, among others, consists of the following software: (1) the software which is developed by or for JVC KENWOOD Corporation;...
  • Page 55 The following copyright notice applies to all files collectively called the Network Time Protocol Version 4 Distribution. Unless specifically declared otherwise in an individual file, this notice applies as if the text was explicitly included in the file. ************************************************************************* * Copyright (c) University of Delaware 1992-2011 * Permission to use, copy, modify, and distribute this software and * its documentation for any purpose with or without fee is hereby * granted, provided that the above copyright notice appears in all...
  • Page 56 [28]<H.Lambermont@chello.nl> ntpsweep 27. [29]Poul-Henning Kamp <phk@FreeBSD.ORG> Oncore driver (Original author) 28. [30]Frank Kardel [31]<kardel (at) ntp (dot) org> PARSE <GENERIC> driver (>14 reference clocks), STREAMS modules for PARSE, support scripts, syslog cleanup, dynamic interface handling 29. [32]William L. Jones <jones@hermes.chpc.utexas.edu> RS/6000 AIX modifications, HPUX modifications 30.
  • Page 57 OpenSSL License --------------- /* ==================================================================== * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 58 * This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code.
  • Page 59 Article 1 General Provision JVC KENWOOD Corporation shall grant to the User a non-exclusive and non-transferable (other than the exceptional case referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User. (the country where the User bought the Product(hereinafter the "Country")
  • Page 60 Article 2 License 1. The license granted under this Agreement shall be the right to use the Licensed Software in the Product. 2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed Software and any related documents, whether in whole or in part.
  • Page 61 Agreement, as well as the conditions of this Agreement as has not yet entered the public domain, and shall not disclose or divulge the same to any third party without approval of JVC KENWOOD Corporation.
  • Page 62 Article 10 Protection of Copyright 1. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to JVC KENWOOD Corporation and the Original Rightholder, and in no event shall they be under the ownership of the User.

  • Page 63: Specification

    5 Specification Operational Specifications Image device 1/2.7-type Mega-pixel CMOS sensor Sensitivity Color: 0.6 lx, B/W: 0.6 lx (50%) Day/Night Easy D/N Auto Gain Control Off/On, selectable Auto Iris Control AES (Automatic Electric Shutter) White Balance ATW (2800K～8500K) and Manual PAL: 1/25~1/10000 sec Electric Shutter NTSC: 1/30~1/10000 sec Noise Reduction...
  • Page 64 IP Specifications Video Compression H.264 & MPEG4 & MJPEG Single Encode: 1080P (max.) Video Streaming Dual Encode: 720P + D1 (max.) NTSC: 1080P(1920 x 1080), 720P(1280 x 720), D1(720 x 480), 4CIF(704 x 480), VGA(640 x 480), 640 x 360, CIF(352 x 240), QVGA(320 x 240) Resolution PAL: 1080P(1920 x 1080), 720P(1280 x 720), D1(720 x 576), 4CIF(704 x 576), VGA(640 x 480),...
  • Page 65 Connectors Audio In/out: removable terminal block Alarm In/out: removable terminal block Environmental Operating -10 °C to 50 °C Temperature Operating Humidity 20 % to 90 % (without condensation) Storage Temperature -20 °C to 60 °C © 2012 JVC KENWOOD Corporation...

Table of Contents