Table of Contents
Advertisement
Chapter 9. Configuring Firewall/NAT Settings
5. Click on the
9.7.4.5
Delete a Time Range
To delete a Time Range, click on the
9.7.4.6
Delete a Schedule in a Time Range
To delete a schedule in a Time Range, follow the instructions below:
1. Open the Time Range Configuration page (see section 9.7.4.2 Access Time Range Configuration
Page – (Firewall è Policy List è Time Range)).
2. Click on the
Time Range from the Time Range drop-down list.
3. Select the Schedule from the drop-down list.
4. Click on the
9.7.4.7
Time Range Example
1. Create a time range – see Figure 9.31.
2. Associate the time range to an outbound ACL rule by selecting an existing time range from the
Time Range drop-down list. Figure 9.35 shows that MISgroup1 is denied FTP access during
office hours.
Figure 9.35. Time Range Example – Deny FTP Access for MISgroup1 During OfficeHours
82
button to save the new settings.
icon of the Time Range to be deleted.
icon of the Time Range to be deleted in the Time Range list table or select the
button to delete this schedule.
Figure 9.34. Time Range Example – Create a Time Range
Internet Security Router User's Manual
Time Range drop-down list
Hide quick links:
Advertisement
Table of Contents
