Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appli- ance. The following symbols are used in the text: Safety instructions Warning! Notes that concern your personal safety. Important! Notes that show how to avoid damage to the appliance.
Operating Instructions 1 Safety instructions Please comply with these instructions. If you do not, any damage re- sulting is not covered by the warranty. This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC –...
Safety during use • Remove stickers and film from the glass ceramic. • There is the risk of burns from the appliance if used carelessly. • Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware. •...
Description of the Appliance Cooking surface layout Single cooking zone Single cooking zone 1200W 1800W Double cooking zone Control panel Single cooking zone 750/2200W 1200W Control panel layout Cooking zones and heat setting selection Display Pilot light Dual zone Outside ring On/Off On/Off...
Touch Control sensor fields The appliance is operated using the Touch Control sensor fields. Func- tions are controlled by touching sensor fields and confirmed by dis- plays. Touch the sensor fields from above, without covering other sensor fields. Sensor field Function On / Off Switches appliance on and off...
Operating the appliance Switching the appliance on and off Control panel Display ¾ Switch on Touch for 2 seconds. / Decimal point flashes Switch off Touch for 1 second / none Selecting the cooking zone Control panel Display ¾ Select Touch Decimal point illumi- nates...
Switching the double ring cooking zone on and off With the dual cooking zone the heating surface can be matched to the size of the cookware. When a heat setting is selected, both zones are switched on and the pi- lot light illuminates.
Overriding the child safety lock The child safety device can be released in this way for a single cooking session; it remains activated afterwards. Step Control panel Display Switch on the appliance (if hot) ¾ Touch of the front right Decimal points flash cooking zone and at the...
Safety cut-out Cooking surface • If after switching on the appliance a heat setting is not set for a cooking zone within approx. 10 seconds, the appliance automatically switches itself off. • If one or more sensor fields are touched for longer than approx. 10 seconds, the cooking surface is automatically switched off.
Tips on cooking and frying Information about acrylamides According to the latest scientific research, intensive browning of food, especially in products containing starch, may present a health risk due to acrylamide. Therefore we recommend cooking at low temperatures and not browning foods too much. Cookware •...
Examples of cooking applications The information given in the following table is for guidance only. Heat Cooking set- suitable for Cook time Tips/Hints process ting Residual heat setting, Off position Keeping Keeping cooked foods food as required Cover warm warm Hollandaise sauce, Melting melting butter, chocolate,...
Cleaning and care Take care! Risk of burns from residual heat. Important Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1.
What to do if … Problem Possible cause Remedy The cooking zones are not No cooking zone selected Select cooking zone within functioning. 10 seconds of switching on (Decimal point lights up) The cooking zones cannot More than 10 seconds has Switch on the appliance be selected / Appliance passed since the appliance...
Warning! Repairs to the appliance are only to be carried out by quali- fied service engineers. Considerable danger to the user may result from improper repairs. If the appliance has been wrongly operated, the visit from the service technician or dealer may not take place free of charge, even during the warranty period.
Installation Instructions Safety instructions The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accord- ance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be ob- served.
A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.
Great Britain Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we...
AEG appliance, or for further information on AEG products please contact our Customer Care Depart- ment by letter or telephone at the address below or visit our website at www.aeg.co.uk. Customer Care Department For Customer Service in the Republic Major Appliances...