Final gear oil quantity:
0.19 L
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
If desired, an SAE 80W90 hypoid
gear oil may be used for all
conditions.
NOTE:
"GL-4" is a quality and additive rating.
Hypoid gear oils rated "GL-5" or "GL-6"
may also be used.
5. Install and tighten the filler bolt to
the specified torque.
Tightening torque:
Oil filler bolt:
23 Nm (2.3 m·kg)
6. After replacing the final gear oil,
be sure to check for oil leakage.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Air filter case cover
2. Screw ( 3)
Air filter
The air filter should be cleaned at the
specified
intervals.
It
cleaned more frequently if you are
riding in unusually wet or dusty areas.
1. Remove the air filter case cover
by removing the screws.
2. Remove the air filter.
6-12
3. Tap the air filter lightly to remove
most of the dust and dirt. Blow out
EAU00586*
the remaining dirt with com-
pressed air as shown. If the air fil-
ter is damaged, replace it.
should
be
1
2
3
4
5
6
7
8
9