Page 2: Introduction
Pioneer grants to you a non-transferable, non-exclusive licence to use the software installed on the Pioneer products (the “Software”) and the related documentation solely for your own personal use or for internal use by your business, only on such Pioneer products.
Page 3 The Software and related documentation are provided to you “AS IS”. PIONEER AND ITS LICENSOR(S) (for the purpose of provisions 2 and 3, Pioneer and its licensor(s) shall be col- lectively referred to as “Pioneer”) MAKES AND YOU RECEIVE NO WARRANTY,...
Page 4 This is the entire Agreement between Pioneer and you regarding its subject matter. No change in this Agreement shall be effective unless agreed to in writing by Pioneer. If any pro- vision of this Agreement is declared invalid or unenforceable, the remaining provisions of...
Page 5: Terms And Conditions For The Navtech Data
CRB1875A_Eng.book Page 4 Thursday, March 27, 2003 1:22 PM TERMS AND CONDITIONS for the NAVTECH Data PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY BEFORE USING THE NAVTECH DATABASE NOTICE TO THE USER THIS IS A LICENSE AGREEMENT - AND NOT AN AGREEMENT FOR SALE - BETWEEN YOU AND NAVIGATION TECHNOLOGIES B.V.
Page 6 CRB1875A_Eng.book Page 5 Thursday, March 27, 2003 1:22 PM LIMITED WARRANTY Navigation Technologies warrants that, subject to the Warnings set out below, for a period of 12 months after acquisition of your copy of the Database, it will perform substantially in accordance with Navigation Technologies’...
Page 7 CRB1875A_Eng.book Page 6 Thursday, March 27, 2003 1:22 PM GOVERNING LAW This Agreement shall be governed by the laws of the jurisdiction, in which you reside at the date of acquisition of the Database. Should you at that moment reside outside the European Union or Switzerland, the law of the jurisdiction within the European Union or Switzerland where you acquired the Database shall apply.
Page 8 CRB1875A_Eng.book Page 7 Thursday, March 27, 2003 1:22 PM LIMITED RIGHTS NOTICE (JUN 1987) These data are submitted with limited rights under Government Contract No. _____ (and subcontract ______, if appropriate). These data may be reproduced and used by the Government with the express limitation that they will not, with- out written permission of the Contractor, be used for purposes of manufacture nor disclosed outside the Government;...
Page 9: Ordnance Survey (Os)
CRB1875A_Eng.book Page 8 Thursday, March 27, 2003 1:22 PM ORDNANCE SURVEY (OS) END USER LICENCE AGREEMENT FOR ORDNANCE SURVEY (OS) DATA Please read this agreement carefully before using the Navigation System. This is a licence agreement to use the OS Code-Point data incorporated in the Navigation System.
Page 10: Table Of Contents
CRB1875A_Eng.book Page 9 Thursday, March 27, 2003 1:22 PM Table of Contents Introduction ................1 Licence Agreement......................1 PIONEER AVIC-900DVD, AVIC-800DVD (CNDV-30)..........1 TERMS AND CONDITIONS for the NAVTECH Data ..........4 ORDNANCE SURVEY (OS) ..................8 Table of Contents .........................9 Important Safety Information..................16 Notes Before Using the System..................
Page 11 CRB1875A_Eng.book Page 10 Thursday, March 27, 2003 1:22 PM Chapter 2 Setting a Route to Your Destination ........39 Before setting your destination and route..............39 Selecting the country where you want to search ............40 Perform the route calculation of the several route options, and select one....40 Route Calculation to Your Home Location or to Your Favourite Location..42 Selecting your Destination from the Address Book ..........42 Searching for your Destination by Address..............43...
Page 12 CRB1875A_Eng.book Page 11 Thursday, March 27, 2003 1:22 PM Chapter 4 Utilising Various Information..........63 Editing the Address Book ....................63 Registering a previous location in the Address Book ..........63 Editing a location’s information .................. 65 Deleting the data in the Address Book ..............66 Confirming the location contained in the Address Book on the map ......
Page 13 Combining and Using Pioneer AV Equipment....99 To Ensure Safe Driving ....................99 Before Using ........................99 Characteristics of the Navigation System when combined with Pioneer AV Head Unit . How to use the Remote Control ................100 Basic Operation When Pioneer AV Equipment Is Combined.......105 Switching the source ....................105...
Page 14 CRB1875A_Eng.book Page 13 Thursday, March 27, 2003 1:22 PM DAB TUNER........................129 How to listen to a DAB ..................... 130 Switching the display ....................130 Using dynamic label....................130 Switching the road traffic flash and transport flash on or off........131 Canceling road traffic flash and transport flash interruptions part way through ..
Page 15 CRB1875A_Eng.book Page 14 Thursday, March 27, 2003 1:22 PM Using non fading output ...................150 Using the high pass filter ..................151 Adjusting source levels.....................151 Initial Settings ........................152 Displaying the INITIAL SETTINGS MENU ...............152 Setting the FM tuning step ..................152 Setting the DAB Priority Function ................152 Switching Auto PI Seek ....................153 Switching the warning tone ..................153 Switching the auxiliary setting ..................153...
Page 16 CRB1875A_Eng.book Page 15 Thursday, March 27, 2003 1:22 PM Appendix ................165 Positioning Technology....................165 Handling Large Errors....................167 When the positioning by GPS is impossible ............167 Conditions likely to cause noticeable positioning errors .......... 168 Troubleshooting ......................169 Messages and how to react to them................172 Route Setting Information .....................175 Route search specifications ..................
Page 17: Important Safety Information
CRB1875A_Eng.book Page 16 Thursday, March 27, 2003 1:22 PM Important Safety Information Before using your Navigation System, be sure to read and fully understand the following safety information: • Read the manual before operating this Navigation System. • This Navigation System is intended solely as an aid to you in the operation of your vehicle. It is not a substitute for your attentiveness, judgement, and care when driving.
Page 18: Notes Before Using The System
When using this unit, make sure to start your engine ﬁrst. Using this unit without starting the engine will run down the battery. About this disc Only use the Pioneer Map disc with Pioneer DVD Navigation Unit. You cannot use other discs. DVD-Videos and CDs can be played on AVIC-9DVD, AVIC-9DVD —...
Page 19: Features Of Your Dvd Navigation System
Display of various guidance screens Integration between navigation and audio has been implemented. Pioneer’s audio equipment can be used with the navigation screen, by addition of the AVH- P6400CD or AVH-P6400R display sold separately. Furthermore, not only is conventional voice operation for navigation possible, but also voice operation of AV equipment became possible.
Page 20: How To Read This Manual
(default settings), read the relevant section of this chapter. 6. Combining and Using Pioneer AV Equipment If the Pioneer display, “AVH-P6400CD” or “AVH-P6400R”, and Pioneer audio equipment are connected to your Navigation System, you can operate the audio equipment using the Remote Control of your Navigation System.
Page 21: Terminology
CRB1875A_Eng.book Page 20 Thursday, March 27, 2003 1:22 PM Terminology Before moving on, take a few minutes to read the following information about the conven- tions used in this manual. Familiarity with these conventions will help you greatly as you learn how to use your new equipment.
Page 22: About The Difference In The Operation Of The Remote Control (Avic-8Dvd)
CRB1875A_Eng.book Page 21 Thursday, March 27, 2003 1:22 PM Frame by frame playback and slow motion playback Push the control stick up while the Operation mode switch is set to “DVD”. Reverse frame by frame playback and reverse slow motion playback (in case of XDV-P9 and XDV-P9 —...
Page 23: Installing The Program
CRB1875A_Eng.book Page 22 Thursday, March 27, 2003 1:22 PM Installing the Program The program is installed to the main unit of the Navigation System using the disc sold sepa- rately. This is not necessary if your dealer already performed the installation. Go to Chapter 1 onward.
Page 24 CRB1875A_Eng.book Page 23 Thursday, March 27, 2003 1:22 PM 4 Select the language from the list. The list of the languages you can use appears. Move the joystick up or down to highlight the language you want. 5 Click the OK button. Installation of the program, in the language you chose, begins.
Page 25 CRB1875A_Eng.book Page 24 Thursday, March 27, 2003 1:22 PM 7 Set the clock. The time difference between the time originally set in this unit (Central European Time) and the current location of your vehicle is shown. If necessary, adjust the time difference. Move the joystick to select “Hour +”...
Page 26: Chapter 1 Basic Operation
CRB1875A_Eng.book Page 25 Thursday, March 27, 2003 1:22 PM Chapter Basic Operation Switching On and Off Switching On When the engine of your vehicle is running, the power of the main unit of your Navigation System is turned on. After the opening screen appears for a few seconds, a cautionary mes- sage appears.
Page 27: Types Of Menu
CRB1875A_Eng.book Page 26 Thursday, March 27, 2003 1:22 PM Types of Menu You perform most tasks through using menus. A typical sequence of steps is as follows: “Select a menu, Select a menu item with the joystick, and Click the OK button”. There are two types of menu: the “Main menu”...
Page 28: Shortcut Menu
CRB1875A_Eng.book Page 27 Thursday, March 27, 2003 1:22 PM sShortcut menu While the map is shown, click the OK button to show the Shortcut menu. You can do various tasks, such as route calculation for the location pointed by cross pointer, or registering a loca- tion in the Address Book, faster than using the Main menu.
Page 29: Basic Navigation
CRB1875A_Eng.book Page 28 Thursday, March 27, 2003 1:22 PM Basic Navigation This section describes basic navigation, such as how to select menu items, using setting your destination as an example. Based on the information you know about your destination, your Navigation System searches for your destination on the map, and calculates the route.
Page 30: Operate Navigation By Indicating Menu
CRB1875A_Eng.book Page 29 Thursday, March 27, 2003 1:22 PM sOperate navigation by indicating menu While the map is displayed, if you press MENU button, the Main menu of the Navigation System appears. Only “New Destination” is highlighted, and it has different colour from the other items. This shows that this item is being selected.
Page 31 CRB1875A_Eng.book Page 30 Thursday, March 27, 2003 1:22 PM When the list of the items goes over several screens If the list of the matching city names cannot be displayed within one screen, a scroll bar appears on the left-hand side of the list to show that there are more items. If you move the joystick up or down, the remaining items appear.
Page 32: How To Use The Text Palette
CRB1875A_Eng.book Page 31 Thursday, March 27, 2003 1:22 PM sHow to use the text palette Move the joystick up or down, or left or right, to highlight a letter you want to enter. If you click the OK button, the selected letter appears in the text box. As you enter each letter, your Navigation System narrows down the possible items, and the items in the list that appears on the right-hand side of the display change accordingly.
Page 33: When The Route Calculation To Your Destination Is Completed
CRB1875A_Eng.book Page 32 Thursday, March 27, 2003 1:22 PM Entering letters using numeric keypad of the Remote Control Every time you press the key, the letters assigned to the key are displayed in sequence. If you press different keys while the letter to enter is selected, or if you press the OK button on the bottom-right of the numeric keypad, the selected letter appears in the text box.
Page 34: How To Use The Map
CRB1875A_Eng.book Page 33 Thursday, March 27, 2003 1:22 PM How to Use the Map Most of the information provided by your Navigation System can be seen on the map. You need to get to know how the information appears on the map. sHow to view the map of the current location The display is like a conventional map, and shows roads of various designations as well as geographical features such as rivers, parks, and forests.
Page 35 CRB1875A_Eng.book Page 34 Thursday, March 27, 2003 1:22 PM Arrow Mode The direction of travel is shown by a simple arrow. When approaching a guidance point, such as an intersection, the display switches to show the distance and direction to the guidance point.
Page 36 CRB1875A_Eng.book Page 35 Thursday, March 27, 2003 1:22 PM Guidance point* The next turning point is shown by a yellow ﬂag. Destination* The checker-ﬂag indicates your destination (1) Name of the next street to be used* If there is a number on a road, the number will be indicated next to the name of the road (only when the road numbers are recorded in the disc).
Page 37: Changing The Scale Of The Map
CRB1875A_Eng.book Page 36 Thursday, March 27, 2003 1:22 PM sChanging the scale of the map On the top-right of the map display, the scale of the map is shown. If you move the scale con- trol up or down, you can change the scale of the map through 16 levels: 25m, 50m, 100m, 200m, 500m, 1km, 2km, 5km, 10km, 20km, 50km, 100km, 200km, 500km, 1000km, 2000km (25yd, 50yd, 100yd, 0.25mi, 0.5mi, 0.75mi, 1mi, 2.5mi, 5mi, 10mi, 25mi, 50mi, 100mi, 250mi, 500mi, 1000mi).
Page 38 CRB1875A_Eng.book Page 37 Thursday, March 27, 2003 1:22 PM Viewing the information of speciﬁed location You can check details of the current location or of the location pointed by the cross pointer. 1 Click the OK button on the map display. The Shortcut menu appears.
Page 39 CRB1875A_Eng.book Page 38 Thursday, March 27, 2003 1:22 PM Finding a destination on the map If you search the location you want to visit by scrolling the map, and select “Destination” in the Shortcut menu, you can specify your destination on the map. 1 Press the NAVI button.
Page 40: Setting A Route To Your Destination
CRB1875A_Eng.book Page 39 Thursday, March 27, 2003 1:22 PM Chapter Setting a Route to Your Destination Before setting your destination and route There are several methods for search for your destination, the operations common to each method will be explained in this section. Caution For safety reasons, these functions are not available while your vehicle is in motion.
Page 41: Selecting The Country Where You Want To Search
CRB1875A_Eng.book Page 40 Thursday, March 27, 2003 1:22 PM sSelecting the country where you want to search Information on the disc is arranged according to each country. When searching for your desti- nation, your Navigation System searches for it in the country currently selected. Therefore, if your destination is in another country, you must change the country setting before starting the destination search.
Page 42 CRB1875A_Eng.book Page 41 Thursday, March 27, 2003 1:22 PM The following information is displayed on this screen: 1. Use/avoid motorway 2. Distance to your destination 3. Travel time to your destination ➲ You can set whether to use toll road or ferry. The set contents will be reﬂected to all the route options.
Page 43: Route Calculation To Your Home Location Or To Your Favourite Location
CRB1875A_Eng.book Page 42 Thursday, March 27, 2003 1:22 PM Route Calculation to Your Home Location or to Your Favourite Location If your home location is registered, the route home can be calculated, by a single press of the button from the Main menu. Also, you can register one location, such as your workplace, as your favourite location, and the route is calculated in a similar way.
Page 44: Searching For Your Destination By Address
CRB1875A_Eng.book Page 43 Thursday, March 27, 2003 1:22 PM Searching for your Destination by Address You can specify the address of your destination. The route to a speciﬁc intersection or street, or to the central part of the city, can be also calculated. (For the details of the operation, see “Basic Operation”...
Page 45 CRB1875A_Eng.book Page 44 Thursday, March 27, 2003 1:22 PM Searching your destination after specifying the name of city or settle- ment You can narrow down the searching candidates by initially specifying the name of city or settlement where your destination is located. After entering the name of city or settlement, select the name of city or settlement you want from the list.
Page 46 CRB1875A_Eng.book Page 45 Thursday, March 27, 2003 1:22 PM 5 Select the area where your destination is located, and click the OK button. If the speciﬁed road is relatively long, and passes through several areas of the city or set- tlement, the list of the area appears.
Page 47: Finding Your Destination By Selecting The Type Of Facility
CRB1875A_Eng.book Page 46 Thursday, March 27, 2003 1:22 PM Finding Your Destination by Selecting the Type of Facility Information about various facilities (Points Of Interest - POI), such as petrol stations, amuse- ment parks or restaurants is available. By selecting the category, you can search for a Point Of Interest.
Page 48: Finding Poi In Your Surroundings
CRB1875A_Eng.book Page 47 Thursday, March 27, 2003 1:22 PM ➲ You can also narrow down the search range by initially specifying the name of city or settlement where your destination is located. For details, see “Searching your destina- tion after specifying the name of city or settlement” on page 44. ➲...
Page 49: Finding Your Destination By Specifying The Post Code
CRB1875A_Eng.book Page 48 Thursday, March 27, 2003 1:22 PM Finding Your Destination by Specifying the Post Code If you know the post code of your destination, you can use it to ﬁnd your destination. 1 Select “New Destination” from the Main menu, and then select “Postal Code Search”.
Page 50: Setting An Entrance Or Exit Of A Motorway As Your Destination
CRB1875A_Eng.book Page 49 Thursday, March 27, 2003 1:22 PM Setting an Entrance or Exit of a Motorway as Your Destination You can set the entrance or exit of motorway as your destination. 1 Select “New Destination” from the Main menu, and then select “Motorway Search”. Click the OK button.
Page 51: Checking The Set Route
CRB1875A_Eng.book Page 50 Thursday, March 27, 2003 1:22 PM Checking the Set Route You can check information about the route between your current location and your destination. You can select two methods: checking the passing streets with a list; and checking the shape of the route by scrolling the map along the route.
Page 52: Checking The Set Route With Text
CRB1875A_Eng.book Page 51 Thursday, March 27, 2003 1:22 PM sChecking the set route with text 1 Press the DETOUR button on the Remote Control for more than two seconds. The screen to select the checking method appears. 2 Select “Route Profile”and click the OK button. 3 Check the contents on the display.
Page 53 CRB1875A_Eng.book Page 52 Thursday, March 27, 2003 1:22 PM...
Page 54: Guidance To Your Destination
CRB1875A_Eng.book Page 53 Thursday, March 27, 2003 1:22 PM Chapter Guidance to Your Destination Route Guidance by Your Navigation System After setting the route, once you start your vehicle, route guidance by display and voice begins. When you arrive at your destination, a message indicating the completion of route guidance appears, and the normal map display returns.
Page 55 CRB1875A_Eng.book Page 54 Thursday, March 27, 2003 1:22 PM If you stray from the route If, for any reason, you stray from the suggested route, you can automatically search the route to get back on track. This function is called “Auto Reroute”, and you can set it On or Off in the Settings menu.
Page 56: Confirming Traffic Information Ahead On The Set Route
CRB1875A_Eng.book Page 55 Thursday, March 27, 2003 1:22 PM Conﬁrming Trafﬁc Information Ahead on the Set Route You can check the trafﬁc information along the route received by the main unit or search for a new route based on the trafﬁc information. sAvoiding trafﬁc ahead on the set route In the default setting of the Navigation System, if “Auto Traffic Reroute ”...
Page 57: When Confirming Traffic Information Manually
CRB1875A_Eng.book Page 56 Thursday, March 27, 2003 1:22 PM sWhen conﬁrming trafﬁc information manually When you press the GUIDE button on the Remote Control for more than three seconds, you can check trafﬁc information about your route. When trafﬁc information is received, the message asking whether to recalculate the route to avoid the trafﬁc jam is displayed.
Page 58: Recalculating The Route To Your Destination
CRB1875A_Eng.book Page 57 Thursday, March 27, 2003 1:22 PM Recalculating the Route to Your Destination You can recalculate the route to avoid a trafﬁc jam or road works ahead. You can set the length of the area, and avoid just that area, or you can even search a new route from the current loca- tion to your destination.
Page 59: Cancelling The Route Guidance
CRB1875A_Eng.book Page 58 Thursday, March 27, 2003 1:22 PM Cancelling the Route Guidance If you no longer need to go to your destination, or you want to set another location as your des- tination, carry out the following operations: sDelete the current route, and cancel the route guidance If you no longer need route guidance, delete the current route, and cancel the route guidance.
Page 60: Adding Way Points To The Current Route
CRB1875A_Eng.book Page 59 Thursday, March 27, 2003 1:22 PM Adding Way Points to the Current Route You can select way points (locations you want to visit on the way to your destination) and you can recalculate the route to pass this location. sAdding a way point You can set up to ﬁve way points.
Page 61: Skipping A Way Point
CRB1875A_Eng.book Page 60 Thursday, March 27, 2003 1:22 PM sSkipping a way point You can opt for the next way point to be skipped, and the new route to be calculated accord- ingly. 1 Press the CANCEL ROUTE button on the Remote Control for more than two seconds. A message asking whether you want to skip the next way point appears.
Page 62: Displaying Certain Points Of Interest On The Map
CRB1875A_Eng.book Page 61 Thursday, March 27, 2003 1:22 PM Displaying Certain Points Of Interest on the Map Selected Points Of Interest (POI) in a certain category can be shown on the map, and you can check the location on the display while driving. 1 Select “Information”...
Page 63 CRB1875A_Eng.book Page 62 Thursday, March 27, 2003 1:22 PM...
Page 64: Utilising Various Information
CRB1875A_Eng.book Page 63 Thursday, March 27, 2003 1:22 PM Chapter Utilising Various Information Editing the Address Book The Address Book stores information about the following types of location. You can edit the contents of the Address Book. • Last Destination - the destination whose route was set most recently. •...
Page 65 CRB1875A_Eng.book Page 64 Thursday, March 27, 2003 1:22 PM 4 Select “Yes” and click the OK button. Alternative option: No : If you do not need to rename, select “No”. The name of the location registered in the Address Book is unchanged, and the Address Book menu appears. 5 Enter a new name;...
Page 66: Editing A Location's Information
CRB1875A_Eng.book Page 65 Thursday, March 27, 2003 1:22 PM ➲ During voice operation, you can get a route calculated by saying the registered name. For the details of voice operation, see Chapter 7. ➲ If you register a location by selecting “Register” from the Shortcut menu, select “Edit Name”...
Page 67: Deleting The Data In The Address Book
CRB1875A_Eng.book Page 66 Thursday, March 27, 2003 1:22 PM Changing a name 1 Select “Edit Name” and click the OK button. Refer to Step 5 in “Registering a previous location in the Address Book” above for the next steps. ➲ You cannot change the name of your home.
Page 68: Confirming The Location Contained In The Address Book On The Map
CRB1875A_Eng.book Page 67 Thursday, March 27, 2003 1:22 PM 2 Select the deletion method. A message conﬁrming deletion appears, if you click the OK button. On this display, you can select the following options: Delete This Item : Delete the location selected in Step 1. Delete All Destinations : All the items stored in Last Destination and Destina- tion History are deleted.
Page 69: Registering Your Home And Your Favourite Location
CRB1875A_Eng.book Page 68 Thursday, March 27, 2003 1:22 PM Registering Your Home and Your Favourite Location By registering your home and your favourite location, you can easily calculate the route by sin- gle press of a button from the Main menu. You might ﬁnd it useful to register your workplace or a relative’s home as your favourite location.
Page 70 CRB1875A_Eng.book Page 69 Thursday, March 27, 2003 1:22 PM 5 Select “Yes” and click the OK button. ➲ If renaming is not necessary, at this step, select “No” and click the OK button. The location is registered, and the Others menu appears. 6 After entering a new name, select “OK”...
Page 71: Changing Or Deleting Your Home Or Your Favourite Location
CRB1875A_Eng.book Page 70 Thursday, March 27, 2003 1:22 PM sChanging or deleting your home or your favourite location Changing your favourite location is described next. 1 Select “Settings” in the Main menu, then select “Others” and “<favourite location name>”. Click the OK button. If you click the OK button, a message conﬁrming that you want to change a registered location appears.
Page 72: Registering A Password
CRB1875A_Eng.book Page 71 Thursday, March 27, 2003 1:22 PM Registering a Password If you register a password, only those who know the password can use your Navigation System. 1 Select “Settings” in the Main menu, then select “Others” and “Password”. Click the OK button.
Page 73: Setting Areas To Avoid
CRB1875A_Eng.book Page 72 Thursday, March 27, 2003 1:22 PM Setting Areas to Avoid If you register Areas to Avoid, such as crowded intersections or congested areas, routes can be calculated that avoid those areas. Areas to Avoid can be set from the Settings menu. Caution If “Display Areas to Avoid”...
Page 74 CRB1875A_Eng.book Page 73 Thursday, March 27, 2003 1:22 PM 5 After specifying an Area to Avoid, click the OK button. The Area to Avoid is enclosed in a red frame. Scroll the map to adjust the position of the red frame. 6 Select “Register”...
Page 75: Changing Or Deleting An Area To Avoid
CRB1875A_Eng.book Page 74 Thursday, March 27, 2003 1:22 PM sChanging or deleting an Area to Avoid You can subsequently change/rename/delete the Area to Avoid. 1 Select “Settings” in the Main menu, then select “Route Guidance” and “Areas to Avoid”. Click the OK button. The list of Areas to Avoid appears.
Page 76: Using Traffic Information
CRB1875A_Eng.book Page 75 Thursday, March 27, 2003 1:22 PM Using Trafﬁc Information You can conﬁrm the trafﬁc information transmitted from the FM radio service through Radio Data System (RDS) on the display. Such trafﬁc information is updated periodically. When you receive trafﬁc information about your route, the Navigation System automatically displays the popup message informing you of the trafﬁc information.
Page 77 CRB1875A_Eng.book Page 76 Thursday, March 27, 2003 1:22 PM Conﬁrming verbalised information regarding trafﬁc The following information appears: • Street name • Site name (The ﬁrst and the last names of the cities involved in the trafﬁc jam and the direc- tion of the trafﬁc jam are shown.) •...
Page 78: Selecting The Radio Station
CRB1875A_Eng.book Page 77 Thursday, March 27, 2003 1:22 PM sSelecting the radio station The RDS-Tuner of this unit automatically tunes to the radio station to receive available trafﬁc information. If reception is poor, you can switch to another station manually. Once the receiv- ing radio station is selected, the system automatically tunes to stations that provide trafﬁc information according to the trace of a driving vehicle.
Page 79 CRB1875A_Eng.book Page 78 Thursday, March 27, 2003 1:22 PM Registering a radio station If you register frequently used stations in advance, you can easily tune to one from the list. This section describes how to register a radio station for the ﬁrst time. 1 See Steps 1 and 2 in “Tuning to a radio station with good reception”...
Page 80: Using A Pc Card
CRB1875A_Eng.book Page 79 Thursday, March 27, 2003 1:22 PM Using a PC Card You can store data in the Address Book in a PC card, which can also be read by this unit. It is very useful when you want to share the data in the Address Book with your friends or to store the data for backup.
Page 81: Loading Data From A Pc Card
CRB1875A_Eng.book Page 80 Thursday, March 27, 2003 1:22 PM Alternative option: Select All : All the locations are selected at once. 3 After ﬁnishing the selection of locations, select “OK” and click the OK button. The list of the stored group appears. 4 Select “New Group”...
Page 82: Deleting Pc Card Data
CRB1875A_Eng.book Page 81 Thursday, March 27, 2003 1:22 PM 3 Select the desired locations and click the OK button. Selected items are ticked. To load the data from other locations, repeat this step. Alternative option: Select All : All the locations are selected at once. 4 Select “OK”...
Page 83: Recording The Driving Information
CRB1875A_Eng.book Page 82 Thursday, March 27, 2003 1:22 PM Recording the Driving Information You can record the actual journey (called driving history) into a PC card and you can check with a personal computer when and from where up to you drove. You can also record whether the driving history was “Private”...
Page 84 CRB1875A_Eng.book Page 83 Thursday, March 27, 2003 1:22 PM 5 Select “Done” and click the OK button. The list of the set contents disappears, and the screen in Step 2 appears. Now “On (Busi- ness)” is indicated on the right side of “Driving Log History”. Once you start the vehicle, recording of the driving history starts.
Page 85: Changing Background Picture
CRB1875A_Eng.book Page 84 Thursday, March 27, 2003 1:22 PM Changing Background Picture In the menu operation screen, you can indicate a picture you like on the background. Some pic- tures are already stored, but you can also use pictures (JPEG format data) created by a personal computer or a digital camera.
Page 86 CRB1875A_Eng.book Page 85 Thursday, March 27, 2003 1:22 PM 5 Select a picture you want for the background, and click the OK button. The message asking how to arrange the picture is indicated. 6 Select a way of arranging the picture, and click the OK button. On this screen, you can select the following items: Centre : Selected picture is displayed at the centre of the screen.
Page 87: Changing Background Picture Stored On A Disc (Av Background Only)
CRB1875A_Eng.book Page 86 Thursday, March 27, 2003 1:22 PM sChanging background picture stored on a disc (AV Background only) 1 Select “Settings”, “Background Picture Setting” from the Main menu, and click the OK button. Background Picture Setting menu is displayed. The picture selected at each screen is indi- cated on the right side of “AV Background”...
Page 88: Checking The Navigation Status
CRB1875A_Eng.book Page 87 Thursday, March 27, 2003 1:22 PM Checking the Navigation Status The navigation status, including the driving status of a vehicle, positioning status by satellite, learning status of the 3D sensor, and cable connection status can be checked. sChecking positioning information by satellite Your Navigation System uses positioning data transmitted from GPS satellites.
Page 89: Checking Sensor Learning Status And Driving Status
CRB1875A_Eng.book Page 88 Thursday, March 27, 2003 1:22 PM sChecking sensor learning status and driving status To improve the precision of navigation, the system learns the driving status of your vehicle and stores the data in the internal memory. The learning status of the sensor can also be checked on the screen.
Page 90: Checking The Connections Of Leads And Installation Positions
CRB1875A_Eng.book Page 89 Thursday, March 27, 2003 1:22 PM 2 Push the BACK button. The previous screen appears. To clear the memory... If you want to delete the memorised learning contents of “Distance”, “Speed Pulse Counter”, or “Learning Status”, perform the following procedure: 1 Select the item you want to delete, and click the OK button.
Page 91 CRB1875A_Eng.book Page 90 Thursday, March 27, 2003 1:22 PM 7. Back Signal When the gear lever is shifted to “R”, the signal switches to “High” or “Low”. Check that it is properly displayed when the selector lever is shifted with the brake pedal depressed if the reversegear signal input lead (see “Installation Manual”) is connected.
Page 92: Customising Your Navigation System
CRB1875A_Eng.book Page 91 Thursday, March 27, 2003 1:22 PM Chapter Customising Your Navigation System Modifying the Default Settings You can tailor default settings such as navigation functions and information display for ease of use. The following example describes how to change settings. In this example, the “Avoid Motor- way”...
Page 93: Items Users Can Change
CRB1875A_Eng.book Page 92 Thursday, March 27, 2003 1:22 PM Items Users can Change The Settings menu contains the Route Guidance, Map Display, Hardware, Others, RDS-TMC, PC Card and Background Picture Setting menus. If you select a menu name in the Settings menu, an equivalent menu appears.
Page 94 CRB1875A_Eng.book Page 93 Thursday, March 27, 2003 1:22 PM KM/Mile Setting This setting controls the unit of distance displayed on your Navigation System. KM * : Show distances in kilometres. Mile : Show distances in miles. Miles & Yards : Show distances in miles and yards. Close-up of Junction This setting enables to switch to an enlarged map around the point when your vehicle is approaching to an intersection, entrance/exit of motorway, or a junction.
Page 95: Map Display Menu
CRB1875A_Eng.book Page 94 Thursday, March 27, 2003 1:22 PM sMap Display menu Map Orientation This setting controls whether the map is shown with the driving direction upward, or with North at the top. Heading Up* : To ensure that the driving direction always faces up, the map automati- cally rotates according to the direction of your vehicle.
Page 96: Hardware Menu
Demo Mode is set off. Voice Recognition Mute This can be set when your Navigation System is combined with the Pioneer Head Unit with a muting function. This setting controls whether the volume of the Head Unit is automatically muted during voice operation.
Page 97 CRB1875A_Eng.book Page 96 Thursday, March 27, 2003 1:22 PM ➲ When the period of summer time comes, or when the summer time ends, this unit does not automatically change the summer time setting. See “Installing the Program” on page 22 and change the summer time setting.
Page 98: Rds - Tmc Menu
CRB1875A_Eng.book Page 97 Thursday, March 27, 2003 1:22 PM Go to Registering and changing your favourite location (see “Registering Your Home and Your Favourite Location” on page 68). Modify Current Location Move the joystick to up/down or left/right to adjust the current location of your vehicle and direction displayed on a map.
Page 99 CRB1875A_Eng.book Page 98 Thursday, March 27, 2003 1:22 PM...
Page 100: Combining And Using Pioneer Av Equipment
Before Using Described in this section is the information you need to understand before using the Naviga- tion System combined with the Pioneer AV Head Unit and the Remote Control operational instruction. sCharacteristics of the Navigation System when combined with...
Page 101: How To Use The Remote Control
OFF. If the reset button is pressed while ACC is ON, it may not work properly. s How to use the Remote Control When operating the Pioneer DVD player* combined with the AV Head Unit, switch the Remote Control operation mode to “AUDIO”. When the operation mode is set to “AUDIO”, the operations for pioneer DVD player become possible with this remote control.
Page 102 Returns you to the previous display. (7) DISP button When the operation mode switch is set to “NAVI”, the display of the Pioneer AV Head Unit screen is switched over. When the operation mode switch is set to “AUDIO” or “DVD”, display an Information Dis- play of DVD.
Page 103 • When the Dipswitch 4 is ON, the volume of the voice guidance of the Navigation System is adjusted. • When the Dipswitch 4 is OFF, the volume of Pioneer Head Unit is adjusted. If the dial is pressed, the volume is reduced to around 1/10th of the volume (ATT function). When pressed again, the volume returns to its previous level.
Page 104 When you turn the dial downwards, the volume decreases. Turning it upwards increases the volume. The volume of Pioneer Head Unit is adjusted. If the dial is pressed, the volume is reduced to around 1/ 10th of the volume (ATT function). When pressed again, the volume returns to its previous level.
Page 105 Operation of the DVD player When using the Remote Control of AVIC-8DVD, only the operations controlled from the AV Head Unit are possible for Pioneer’s DVD player. When using other Remote Control of Pioneer Navigation Unit, set the operation mode switch to “DVD”.
Page 106: Basic Operation When Pioneer Av Equipment Is Combined
CRB1875A_Eng.book Page 105 Thursday, March 27, 2003 1:22 PM Basic Operation When Pioneer AV Equipment Is Combined This section describes how to switch the source and screen. In addition, a basic operational ﬂow for each source is also described. The operation method for each source is almost the same as the basic operational ﬂow described in this section.
Page 107: Switching The Screen
CRB1875A_Eng.book Page 106 Thursday, March 27, 2003 1:22 PM sSwitching the screen 1 Press the NAVI/AV button to select the display mode. As you press the NAVI/AV button, the map screen of the Navigation System or the dis- play of the audio are selected. (Map screen of the Navigation System) (Audio operation screen) NAVI/AV...
Page 108: Flow Of Menu Operation At Each Source
CRB1875A_Eng.book Page 107 Thursday, March 27, 2003 1:22 PM sFlow of menu operation at each source 1 Press the SOURCE button and switch to the source you want to operate. 2 Press the A.MENU (AUDIO) button. The menu of selected source appears. ➲...
Page 109 CRB1875A_Eng.book Page 108 Thursday, March 27, 2003 1:22 PM 5 Press 5 5 5 5 or ∞ ∞ ∞ ∞ to select the item you want to operate, and press 5 5 5 5 , ∞ ∞ ∞ ∞ , 2 2 2 2 and 3 3 3 3 to change the setting.
Page 110: Tuner
These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on page 110. Pioneer AV Head Unit’s (AVH-P6400CD or AVH-P6400R) AF (alternative frequencies search) function can be switched on and off. If this is not necessary, turn AF off (refer to page 113).
Page 111: Displaying The Tuner Menu
CRB1875A_Eng.book Page 110 Thursday, March 27, 2003 1:22 PM sDisplaying the TUNER MENU 1 Press A.MENU (AUDIO) button when source is TUNER. 2 Select “TUNER” and press A.MENU (AUDIO) button. The TUNER MENU is displayed as follows: BSM (BEST STATIONS MEMORY), REGIONAL, LOCAL, PTY, TA (TRAFFIC ANNOUNCEMENTS), AF (ALTERNATIVE FREQUENCY), NEWS, P.CH MEMORY ➲...
Page 112: Tuning In Strong Signals
CRB1875A_Eng.book Page 111 Thursday, March 27, 2003 1:22 PM sTuning in strong signals Local seek tuning lets you tune in only those radio stations with sufﬁciently strong signals for good reception. 1 Press 5 or ∞ in the TUNER MENU to select “LOCAL”, and press A.MENU (AUDIO) button.
Page 113: Rds
CRB1875A_Eng.book Page 112 Thursday, March 27, 2003 1:22 PM RDS (radio data system) is a system for providing information along with FM broadcasts. This inaudible information provides such features as program service name, program type, trafﬁc announcement standby and automatic tuning, intended to aid radio listeners in ﬁnding and tun- ing in to a desired station.
Page 114: Displaying The Rds (Tuner) Menu
If you are listening to a broadcast and the reception becomes weak or there are other prob- lems, the Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) will automatically search for a different station in the same network which is broadcasting a stronger signal.
Page 115: Receiving Traffic Announcements
CRB1875A_Eng.book Page 114 Thursday, March 27, 2003 1:22 PM Using PI Seek If the Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) fails to ﬁnd a suitable alterna- tive frequency, or if you are listening to a broadcast and the reception becomes weak, the Pio- neer AV Head Unit (AVH-P6400CD or AVH-P6400R) will automatically search for a different station with the same programming.
Page 116: Using Pty Functions
TP station. ➲ When listening to sources other than the tuner, the Pioneer AV Head Unit will automatically seek out a TP station with the strongest signal after a 10- or 30-second delay. The delay is 10 seconds if TA is on and 30 seconds if TA and AF are on.
Page 117: Using Radio Text
CRB1875A_Eng.book Page 116 Thursday, March 27, 2003 1:22 PM Using news program interruption When a news program is broadcast from a PTY code news station the Pioneer AV Head Unit can switch from any station to the news broadcast station. When the news program ends, reception of the previous program resumes.
Page 118: Pty List
CRB1875A_Eng.book Page 117 Thursday, March 27, 2003 1:22 PM sPTY list General Speciﬁc Type of program News & Inf News News Affairs Current affairs Info General information and advice Sport Sports Weather Weather reports/meteorological information Finance Stock market reports, commerce, trading, etc. Popular Pop Mus Popular music...
Page 119: Compact Disc (Avh-P6400Cd Only)
— or AVIC-900DVD, see “Hardware manual” of each unit. ➲ You cannot play CD with the built-in DVD-ROM drive of AVIC-8DVD, AVIC-8DVD — AVIC-800DVD. NAVI/AV button TRACK Shows the track currently playing. TIME Shows the elapsed playing time of the current track.
Page 120: Displaying The Compact Disc Menu
CRB1875A_Eng.book Page 119 Thursday, March 27, 2003 1:22 PM sDisplaying the COMPACT DISC MENU 1 Press A.MENU (AUDIO) button when source is CD. 2 Select “COMPACT DISC” and press A.MENU (AUDIO) button. The COMPACT DISC MENU is displayed as follows: REPEAT, RANDOM, SCAN, TRACK LIST, PAUSE, TITLE EDIT You can operate a desired function.
Page 121: Scanning Tracks Of A Cd
CRB1875A_Eng.book Page 120 Thursday, March 27, 2003 1:22 PM sScanning tracks of a CD Scan play lets you hear the ﬁrst 10 seconds of each track on the CD. 1 Press 5 or ∞ to select “SCAN” from the COMPACT DISC MENU, and press A.MENU (AUDIO) button.
Page 122: Using Disc Title Functions
CRB1875A_Eng.book Page 121 Thursday, March 27, 2003 1:22 PM sUsing disc title functions You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD will be displayed. Entering disc title Disc title input lets you input CD titles up to 10 letters long and up to 48 disc titles into the CD player.
Page 123: Multi-Cd
CRB1875A_Eng.book Page 122 Thursday, March 27, 2003 1:22 PM MULTI-CD You can use Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on page 123.
Page 124: 50-Disc Multi-Cd Player
CRB1875A_Eng.book Page 123 Thursday, March 27, 2003 1:22 PM s50-disc multi-CD player Only those functions described in this manual are supported for 50-disc multi-CD players. sDisplaying the MULTI-CD MENU 1 Press A.MENU (AUDIO) button when source is M-CD. 2 Select “MULTI-CD” and press A.MENU (AUDIO) button. The MULTI-CD MENU is displayed as follows: REPEAT, RANDOM, SCAN, TRACK LIST, PAUSE, COMP (COMPRESSION), ITS (INSTANT TRACK SELECTION) PLAY, ITS (INSTANT TRACK SELECTION)
Page 125: Playing Tracks In A Random Order
CRB1875A_Eng.book Page 124 Thursday, March 27, 2003 1:22 PM sPlaying tracks in a random order Random play lets you play back tracks in a random order within the repeat range, MAGA- ZINE (multi- CD player repeat) and DISC (disc repeat). 1 Select the repeat range.
Page 126: Pausing Cd Playback
CRB1875A_Eng.book Page 125 Thursday, March 27, 2003 1:22 PM ➲ Titles of up to 10 characters can be displayed. ➲ Display of some characters may not be possible. sPausing CD playback Pause lets you temporarily stop playback of the CD. 1 Press 5 or ∞...
Page 127 CRB1875A_Eng.book Page 126 Thursday, March 27, 2003 1:22 PM 4 Press 5 to store the currently playing track in the ITS MEMORY. The currently playing selection is added to your playlist. ➲ After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.
Page 128: Using Disc Title Functions
CRB1875A_Eng.book Page 127 Thursday, March 27, 2003 1:22 PM Erasing a CD from your ITS playlist When you want to delete all tracks of a CD from your ITS playlist, you can if ITS play is off. 1 Play a CD that you want to delete. 2 Press 5 or ∞...
Page 129: Using Cd Text Functions
CRB1875A_Eng.book Page 128 Thursday, March 27, 2003 1:22 PM 7 Press BAND/ESC button to return to the playback display. ➲ Titles remain in memory, even after the disc has been removed from the magazine, and are recalled when the disc is reinserted. ➲...
Page 130: Dab Tuner
CRB1875A_Eng.book Page 129 Thursday, March 27, 2003 1:22 PM DAB TUNER The following explains how to use Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) to control a DAB tuner, which is sold separately. For details of DAB tuner-speciﬁc operation/fea- tures, see your DAB tuner’s manual.
Page 131: How To Listen To A Dab
The tuner automatically memorizes the three latest dynamic label received, replacing text from the least recent reception with new text when it is received. Displaying dynamic label 1 Press TEXT button on the Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) to display dynamic label. ➲...
Page 132: Switching The Road Traffic Flash And Transport Flash On Or Off
News Flash on or off ➲ Press TA/NEWS button on the Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) for 2 seconds to turn the news ﬂash on. The “NEWS” icon lights. (Refer to page 129.) ➲...
Page 133: Setting The Announcement Support Interruption
ON/OFF, except for Alarm announcements. Switching between Announcements is as fol- lows: Announcement that is always ON: Alarm (Alarm) Announcements operated by TA/NEWS button on the Pioneer AV Head Unit (AVH- P6400CD or AVH-P6400R): TRAFFIC (“TRFC” icon): Road Trafﬁc Flash Transport Flash NEWS (“NEWS”...
Page 134: Searching The Available Pty
➲ Available PTY search function is different from PTY search function. With Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R), you can operate only the available PTY search. 1 Press 5 or ∞ to select “AVAILABLE PTY SEARCH” from the DAB TUNER MENU, and press A.MENU (AUDIO) button.
Page 135: P.ch Recall/Memory Function
CRB1875A_Eng.book Page 134 Thursday, March 27, 2003 1:22 PM When the “NET” indicator ﬂashes When the selected Service does not have broadcast station information for an identical FM broadcast, if reception conditions for that Service worsen, the “NET” indicator ﬂashes to indicate the Service Follow Function (FM) cannot operate.
Page 136: Tv Tuner
CRB1875A_Eng.book Page 135 Thursday, March 27, 2003 1:22 PM TV TUNER The following explains how to use Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) to control a TV tuner, which is sold separately. ➲ This cannot be used unless AV Head Unit is combined and the source unit is connected by IP-BUS.
Page 137: Displaying The Tv Tuner Menu
CRB1875A_Eng.book Page 136 Thursday, March 27, 2003 1:22 PM sDisplaying the TV TUNER MENU 1 Press A.MENU (AUDIO) button when source is TV. 2 Select “TV TUNER” and press A.MENU (AUDIO) button. The TV TUNER MENU is displayed as follows: BSSM (BEST STATIONS SEQUENTIAL MEMORY), P.CH MEMORY, COUNTRY LIST You can operate a desired function.
Page 138: Storing Broadcast Stations
TV 1 - TV 2 sSelecting the country group In the Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R), channels are preset for your reception area enables reception of multiple channels. 1 Press 5 or ∞ to select “COUNTRY LIST” from the TV TUNER MENU, and press A.MENU (AUDIO) button.
Page 139: Dvd
CRB1875A_Eng.book Page 138 Thursday, March 27, 2003 1:22 PM The following explains how to use Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) to control a DVD, which is sold separately. For details of DVD player or Muti-DVD player opera- tion/features, see your product’s manual.
Page 140: Displaying The Dvd Menu
Time, and switch the audio, subtitle and angle settings. ➲ You can also specify Title, Chapter and Time with Information Display 2. With Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R), Track up/down does not work with the Multi- DVD player.
Page 141: Disc Playback
CRB1875A_Eng.book Page 140 Thursday, March 27, 2003 1:22 PM sDisc Playback 1 Move the control stick up. ➲ Move the control stick up when a disc is playing, pauses playback. ➲ If the last disc played was a DVD, playback starts from the point on that disc where you stopped play previously.
Page 142: Disc Fast Forward/Reverse
CRB1875A_Eng.book Page 141 Thursday, March 27, 2003 1:22 PM sDisc Fast Forward/Reverse Fast Forward 1 During play, move the control stick right. 2 Release the control stick at the point you want to watch/listen. Playback resumes from that point. ➲ If you continue pushing the control stick right for 5 seconds, the colour of the fast forward mark changes from white to blue.
Page 143: Operating Using Information Display 1
CRB1875A_Eng.book Page 142 Thursday, March 27, 2003 1:22 PM Slow Motion Playback This lets you slow down playback speed. E (GUIDE) button for 1 second during playback. 1 Press E To return to normal playback, move the control stick up. ➲...
Page 144: Operating With Information Display 2
CRB1875A_Eng.book Page 143 Thursday, March 27, 2003 1:22 PM Switching audio, subtitle and angle You can change audio, subtitle and angle if that information is recorded on the disc. 1 Push the joystick left/right to select AUDIO, S.TITLE or ANGLE in Information Display The selected item is indicated in green.
Page 145: Other Sources
CRB1875A_Eng.book Page 144 Thursday, March 27, 2003 1:22 PM Other sources ➲ This cannot be used unless AV Head Unit is combined and the source unit is connected by IP-BUS (except “VIDEO”). VIDEO External sWhen source is EXT 1-6 KEY 1 Press 5 or ∞...
Page 146: When Source Is Aux
CRB1875A_Eng.book Page 145 Thursday, March 27, 2003 1:22 PM sWhen source is AUX NAME EDIT 1 Select “NAME EDIT” and press A.MENU (AUDIO) button. 2 Press A.MENU (AUDIO) button to select the desired character type. Press A.MENU (AUDIO) button repeatedly to switch between the following character type: Alphabet(upper case), Number and Symbols-Alphabet(lower case)-European letters, such as those with accents (e.g.
Page 147: Audio Adjustments
CRB1875A_Eng.book Page 146 Thursday, March 27, 2003 1:22 PM Audio Adjustments The display for AUDIO MENU is the same regardless of which source you operate from. sDisplaying the AUDIO MENU 1 Press A.MENU (AUDIO) button in each source display. MENU is displayed. 2 Press 5 or ∞...
Page 148: Setting The Sound Focus Equalizer
For both FRONT1 and FRONT2 the H setting provides a more pronounced effect than the L setting. 1 Press SFEQ button on Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) to select the desired SFEQ mode. FRONT1-H - FRONT 1-L - FRONT 2-H - FRONT2-L - CUSTOM - OFF 2 Press 2 or 3 to select the desired position.
Page 149: Using The Equalizer
FLAT and a set equalizer curve. 1 Press EQ button on Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) to select the equalizer. Press EQ button on Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) repeatedly to switch between the following equalizer.
Page 150: Adjusting Bass
CRB1875A_Eng.book Page 149 Thursday, March 27, 2003 1:22 PM 1 Press 5 or ∞ to select “EQUALIZER MENU” from the AUDIO MENU, and press A.MENU (AUDIO) button. The EQUALIZER MENU is displayed. BAND (band), LEVEL (adjustment level), FREQUENCY (Centre frequency), Q FAC- TOR (quality factor) 2 Select the equalizer band you want to adjust with 2 2 2 2 / 3 3 3 3 .
Page 151: Adjusting Loudness
Only frequencies lower than those in the selected range are output from the subwoofer. sUsing non fading output When the non fading output setting is on, the audio signal does not pass through Pioneer AV Head Unit’s (AVH-P6400CD or AVH-P6400R) low pass ﬁlter (for the subwoofer), but is out- put through the RCA output.
Page 152: Using The High Pass Filter
CRB1875A_Eng.book Page 151 Thursday, March 27, 2003 1:22 PM 1 Press 5 or ∞ to select “NON FADING” from the AUDIO MENU, and press A.MENU (AUDIO) button. When the subwoofer controller setting is “S.W. CONTROL:EXTERNAL”, you can select non fading output on/off mode. 2 Press 5 to turn non fading output on.
Page 153: Initial Settings
CRB1875A_Eng.book Page 152 Thursday, March 27, 2003 1:22 PM Initial Settings Initial settings lets you perform initial set up of different settings for Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R). sDisplaying the INITIAL SETTINGS MENU 1 Press SOURCE button and hold until the source off.
Page 154: Switching Auto Pi Seek
CRB1875A_Eng.book Page 153 Thursday, March 27, 2003 1:22 PM When it is off Interruption is by the ﬁrst received news ﬂash from among Pioneer AV Head Unit’s RDS and the hide-away DAB trafﬁc information broadcasts. 1 Press 5 or ∞ to select “DAB PRIORITY” from the INITIAL SETTINGS MENU, and press A.MENU (AUDIO) button.
Page 155: Setting The Rear Output And Subwoofer Controller
“REAR SPEAKER:SUBWOOFER”, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) is set for rear fullrange speaker connection (“REAR SPEAKER:FULL”). When rear output are connected to full range speakers (when “REAR SPEAKER:FULL” is selected), you can connect the RCA subwoofer output to a subwoofer.
Page 156: Other Functions
CRB1875A_Eng.book Page 155 Thursday, March 27, 2003 1:22 PM Other Functions Customize the settings to suit your taste and environment. sDisplaying the SETUP MENU 1 Press A.MENU (AUDIO) button in each source display. 2 Press 5 or ∞ to select “SETUP”, and press A.MENU (AUDIO) button. The SETUP MENU is displayed as follows: VIDEO SETTING, AUTO FLAP, REAR MONITOR You can operate a desired function.
Page 157: Setting The Automatic Open Mode
3 Press 3 to select the auto. Press 3 until the OPEN/CLOSE:AUTO setting appears in the display. With auto setting, the display automatically opens or closes when power to Pioneer AV Head Unit (AVH- P6400CD or AVH-P6400R) is switched ON.
Page 158: Operating Your Navigation System With Voice
Operating Your Navigation System with Voice Basics of Voice Operation Your Pioneer Navigation System comes with the latest in voice recognition technology. You can use voice commands to operate many of its functions. This chapter describes where you can use voice commands, and also what commands the system accepts.
Page 159: Operating Only By Voice When The Navigation System Is Started
CRB1875A_Eng.book Page 158 Thursday, March 27, 2003 1:22 PM sOperating only by voice when the Navigation System is started If you set “Auto Voice Recognition” in the Settings menu “ON”, you can operate from enter- ing the password up to route setting by only voice after the engine of your vehicle is started (only when the route is not set).
Page 160: Available Voice Commands Related To Audio
CRB1875A_Eng.book Page 159 Thursday, March 27, 2003 1:22 PM sAvailable voice commands related to audio Common to each source CD Player, Tuner, CD Changer, D.V.D Video, DVD changer, Monitor DVD, Digital Radio, Navigation Audio, Television, Video In, Auxiliary, Source On, Source Off, Display Navi, Dis- play AV, Back, Repeat For TUNER source Preset Station 1-6, Start BSM, Next Page, Previous Page...
Page 161: An Example Of Voice Operation
CRB1875A_Eng.book Page 160 Thursday, March 27, 2003 1:22 PM When all the voice commands cannot be shown in one screen To scroll through the rest of the menu, simply use the Scale Control. You can also display it by saying “Next Page”. To continue to use voice operation, speak a command.
Page 162 CRB1875A_Eng.book Page 161 Thursday, March 27, 2003 1:22 PM 3 Say “Local Search”. You say the contents you want to operate. Here, selection method of your destination is speciﬁed. When you want to search the petrol station nearest to the current location, say “Local Search”.
Page 163 CRB1875A_Eng.book Page 162 Thursday, March 27, 2003 1:22 PM To ﬁnish the entry by spelling and to make the Navigation System dis- play a list of options To ﬁnish entry of the spelt-out name of a city, POI, or postcode, say “Verify”. A list of rele- vant items is displayed.
Page 164: Tips For Voice Operation
➲ If your Pioneer Head Unit has a Mute lead (Head Unit with a yellow/black lead), the sound volume of the Head Unit is automatically reduced during voice operation (see “Voice Rec- ognition Mute” on page 95).
Page 165 CRB1875A_Eng.book Page 164 Thursday, March 27, 2003 1:22 PM...
Page 166: Appendix
CRB1875A_Eng.book Page 165 Thursday, March 27, 2003 1:22 PM Appendix Positioning Technology The Navigation System accurately measures your current location by combining the positioning by GPS and by Dead Reckoning. Positioning by GPS The Global Positioning System (GPS) uses a network of satellites orbiting the Earth. Each of the satel- lites, which orbit at a height of 21,000 km, continually broadcasts radio signals giving time and position information.
Page 167 CRB1875A_Eng.book Page 166 Thursday, March 27, 2003 1:22 PM How do GPS and dead reckoning work together? For maximum accuracy, your Navigation System continually compares GPS data with your estimated position as calculated from the data of 3D Hybrid Sensor. However, if only the data from the 3D Hybrid Sensor is available for a long period, positioning errors are gradually compounded until the estimated position becomes unreliable.
Page 168: Handling Large Errors
CRB1875A_Eng.book Page 167 Thursday, March 27, 2003 1:22 PM Handling Large Errors Positioning errors are kept to a minimum by combining GPS, Dead Reckoning, and map matching. How- ever, in some situations, these functions may not work properly, and the error may become bigger. When the positioning by GPS is impossible •...
Page 169: Conditions Likely To Cause Noticeable Positioning Errors
CRB1875A_Eng.book Page 168 Thursday, March 27, 2003 1:22 PM Conditions likely to cause noticeable positioning errors Certain conditions are more likely to cause discrepancies between your actual position and the location shown on the map display. • If you make a slight turn. •...
Page 170: Troubleshooting
While this list is not comprehensive, it should answer your most common problems. If a solution to your problem cannot be found here, contact your dealer or the nearest authorised Pioneer service facility. You cannot position your vehicle on the map or the positioning error is large.
Page 171 CRB1875A_Eng.book Page 170 Thursday, March 27, 2003 1:22 PM The daylight display is used even when the vehicle lights are on. Possible causes: (1) “Daytime display” is selected on “Day/Night Map display.” (2) The Orange/white lead is not connected. Solutions: (1) Check the “Day/Night Map display”...
Page 172 CRB1875A_Eng.book Page 171 Thursday, March 27, 2003 1:22 PM When the screen is frozen... Park your vehicle at a safe place, and cut the engine off. Turn the ignition key back to “Acc off”. Then start the engine again, and turn the power to the main unit back on. If this does not solve the problem, press the reset button on the main unit.
Page 173: Messages And How To React To Them
If the Navigation unit does not receive the vehicle speed pulse. What to do: Consult your Pioneer dealer. (4) “Speed pulse wire is not connected. System will start to learn without speed pulse. Please keep in mind that accuracy is not fully ensured without speed pulse.”...
Page 174 When: Abnormal output of Gyrosensor is detected. What to do: Note down the error code shown on the screen; turn off the power, and then contact your nearest Pioneer service facility. (8)“Your route could not be found.” When: If the distance to the destination is too far and cannot be set.
Page 175 When: In the case of a system failure. What to do: Note down the error code shown on the screen; turn off the power, and then contact your nearest Pioneer service facility. (16)“DVD Player is overheating. Discontinue until temperature drops.”...
Page 176: Route Setting Information
CRB1875A_Eng.book Page 175 Thursday, March 27, 2003 1:22 PM Route Setting Information Route search speciﬁcations Your Navigation System sets a route to your destination by applying certain built-in rules to the map data. This section provides some useful information about how a route is set. Caution When a route is calculated, the route and voice guidance for the route is auto- matically set.
Page 177: Route Highlighting
• Pioneer does not bear responsibility for the accuracy of the information transmitted. • Pioneer does not bear responsibility for changes to information services provided by broadcast- ing stations or by related companies, such as cancellation of the services or changing to pay-...
Page 178: Copyright
CRB1875A_Eng.book Page 177 Thursday, March 27, 2003 1:22 PM Copyright ©1993-2002 Navigation Technologies B. V. All rights reserved France: ® ® Sourcé: Géoroùte IGN France & BD Carto IGN France Germany: Die Grundlagendaten wurden mit Genehmigung der zuständigen Behörden entnommen. Great Britain: Based upon Ordnance Survey electronic data and used with the permission of the Controller of Her Maj- esty’s Stationary Ofﬁce ©...
Page 179: Dvd Operation Reference Table
CRB1875A_Eng.book Page 178 Thursday, March 27, 2003 1:22 PM DVD Operation Reference Table The operation of a Pioneer DVD player varies slightly according to the model. To operate with the Remote Controll CD-R11, see the following table. Group 1: SDV-P7, AVX-P7300DVD, DVH-P7000R Group 2: XDV-P9, XDV-P9 —...
Page 180: Glossary
CRB1875A_Eng.book Page 179 Thursday, March 27, 2003 1:22 PM Glossary This glossary explains some of the terms used in the manual. 3D Hybrid sensor The built-in sensor which enables the system to estimate your vehicle’s position. A learning function increases its accuracy and two sets of learning data can be stored in memory. Address Book A list of previously searched destinations, way points and locations registered manually.
Page 181 CRB1875A_Eng.book Page 180 Thursday, March 27, 2003 1:22 PM Route setting The process of determining the ideal route to a speciﬁc location; route setting is done automatically by the system when you specify a destination. Set route The route marked out by the system to your destination. It is highlighted in bright green on the map. Tracking Marks on the map indicating the route you have travelled.
Page 182: Display Information
CRB1875A_Eng.book Page 181 Thursday, March 27, 2003 1:22 PM Display Information If there are too many characters used for an item, it may not be displayed on a single screen. If this is the case, the string will be followed by “...” indicating that it continues. Main menu New Destination Address Book...
Page 183 CRB1875A_Eng.book Page 182 Thursday, March 27, 2003 1:22 PM Settings menu Route Guidance (P.92) Map Display (P.94) Hardware (P.95) Others (P.95) RDS-TMC (P.97) PC Card (P.79) Background Picture Setting (P.84) Route Guidance menu (1) Auto Reroute (P.92) Areas to Avoid (P.72) Route No.
Page 184 CRB1875A_Eng.book Page 183 Thursday, March 27, 2003 1:22 PM Others menu (2) Travel Time Display (P.96) Password (P.25, 71) Help Menu (P.96) Voice Recognition Help (P.96) Language Selection (P.23, 96) Return Home (P.42, 68) Others menu (3) Go to (P.42, 68) Modify Current Location (P.97) Adjust Display Position (P.97) Driving Log History (P.82)
Page 185 CRB1875A_Eng.book Page 184 Thursday, March 27, 2003 1:22 PM Information menu Route Information (P.50) Location Status (P.87) RDS-TMC (P.75) Overlay POI (P.61) Route Information menu Route Profile (P.51) Route Scroll (P.50) Location Status menu GPS Status (P.87) 3D Calibration Status (P.88) Connection Status (P.89) Trafﬁc Information menu View Traffic Information (P.75)
Page 186 CRB1875A_Eng.book Page 185 Thursday, March 27, 2003 1:22 PM...
Page 187 CRB1875A_Eng.book Page 186 Thursday, March 27, 2003 1:22 PM...
Page 188 CRB1875A_Eng.book Page 187 Thursday, March 27, 2003 1:22 PM ✁ MEMO Write your registered password here; remove this page from the manual, and store it in a safe place. CAUTION:Never leave any note of your password in your vehicle.
Page 189 CRB1875A_Eng.book Page 188 Thursday, March 27, 2003 1:22 PM...

This manual is also suitable for:

Avic-900dvd Cndv-30

Pioneer AVIC-800DVD Operation Manual

Introduction

Licence Agreement

Table of Contents

Important Safety Information

Notes before Using the System

Features of Your DVD Navigation System

How to Read this Manual

Installing the Program

Chapter 1 Basic Operation

Switching on and off

Types of Menu

Basic Navigation

How to Use the Map

Chapter 2

Setting a Route to Your Destination

Before Setting Your Destination and Route

Route Calculation to Your Home Location or to Your Favourite Location

Selecting Your Destination from the Address Book

Searching for Your Destination by Address

Finding Your Destination by Selecting the Type of Facility

Finding Your Destination by Specifying the Post Code

Setting an Entrance or Exit of a Motorway as Your Destination

Checking the Set Route

Chapter 3

Guidance to Your Destination

Route Guidance by Your Navigation System

Confirming Traffic Information Ahead on the Set Route

Recalculating the Route to Your Destination

Cancelling the Route Guidance

Adding Way Points to the Current Route

Displaying Certain Points of Interest on the Map

Chapter 4

Utilising Various Information

Editing the Address Book

Registering Your Home and Your Favourite Location

Registering a Password

Setting Areas to Avoid

Using Traffic Information

Using a PC Card

Recording the Driving Information

Changing Background Picture

Checking the Navigation Status

Chapter 5

Customising Your Navigation System

Modifying the Default Settings

Items Users Can Change

Combining and Using Pioneer AV Equipment

Chapter 6

To Ensure Safe Driving

Before Using

Basic Operation When Pioneer AV Equipment Is Combined

Tuner

Rds

COMPACT DISC (AVH-P6400CD Only)

Multi-CD

Dab Tuner

Tv Tuner

DVD

Other Sources

Audio Adjustments

Initial Settings

Other Functions

Chapter 7

Operating Your Navigation System with Voice

Basics of Voice Operation

Tips for Voice Operation

Appendix

Positioning Technology

Handling Large Errors

Troubleshooting

Messages and How to React to Them

Route Setting Information

Copyright

DVD Operation Reference Table

Glossary

Display Information

Quick Links

Related Manuals for Pioneer AVIC-800DVD

Summary of Contents for Pioneer AVIC-800DVD