hit counter script
Bosch Security System User Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Security System
  5. Security System
  6. User manual
Bosch Security System User Manual

Bosch Security System User Manual

Hide thumbs Also See for Security System:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
Security System User's Guide
This system includes a telephone line seizure feature. The system may be programmed to communicate with a central
monitoring station to report system events. You will not be able to use your phone while the system is communicating
with the central monitoring station. In the unlikely event that the central station is not able to receive the report, your
phone may be unavailable for up to 20 minutes while the panel makes additional communication attempts.
4998122475C

Advertisement

Table of Contents
loading

Related Manuals for Bosch Security System

Summary of Contents for Bosch Security System

  • Page 1 Security System User's Guide This system includes a telephone line seizure feature. The system may be programmed to communicate with a central monitoring station to report system events. You will not be able to use your phone while the system is communicating with the central monitoring station.
  • Page 2 4998122475C © 2002 Bosch Security Systems...
  • Page 3 Introduction Introduction Your security system helps to secure life, property, and investments against fire, theft, and bodily harm. The command center is an advanced digital device that offers a variety of features not available with other systems. Its highly visible, backlit keypad and built-in sounder alert you to a number of system events.
  • Page 4 About This User’s Guide This owner’s manual is divided into three main sections: Security System Basics: Covers how to use the D1260 Command Center, the various keys, what a “Point” is and the various types of Points, and custom displays.

  • Page 5: Using The Command Center

    Using the Command Center Part I: Security System Basics Using the Command Center Your security system provides quick access to functions Pressing the key adjacent to the function being by pressing the COMMAND key and one or two displayed initiates the function.

  • Page 6: Command Center Keys

    Part I: Security System Basics Command Center Keys Command Center Keys COMMAND Use the COMMAND key in DISPLAYS: combination with one or two numeric keys to perform a function. Exit When Exit> appears in the command center display, pressing the key...
  • Page 7 Perimeter Points A “point” is a detection device, or group of devices These points usually include all exterior doors and connected to your security system. Points display windows of the building. individually at the command center with custom text. Interior Points...
  • Page 8 Part I: Security System Basics Points When there is a fire alarm, the display *FIRE ALARM* is on the first line, text identifying the point as a fire point is displayed on the second line, and instructions for silencing the alarm are displayed on the third and fourth lines.

  • Page 9: Your Custom Display

    Part I: Security System Basics Your Custom Display Your Custom Display “At an idle state” means that the system is not currently performing a function entered by a user. There are three idle states the system may be in: Turned on (Armed)
  • Page 10 Part I: Security System Basics Your Custom Display Default Text Custom Text Area Name Text _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Appears on the top line of the display Note: Throughout this manual, all examples of “AREA # NAME TEXT”...

  • Page 11: View Faulted Or Bypassed Points

    Part I: Security System Basics View Faulted or Bypassed Points View Faulted or Bypassed Points Press the digit key. The text for Area 1 is To properly arm your system, all the exterior points displayed first followed by the number (#) of (doors and windows) and interior points (motion faulted points on the next line.
  • Page 12 Part I: Security System Basics View Faulted or Bypassed Points To manually scroll faulted or bypassed points: Ensure your command center shows idle text. Press the View Points> soft key to display the first faulted point. Press the Next> soft key or the <Previous soft key repeatedly to display the faulted and bypassed point information.

  • Page 13: Warning Displays And Tones

    Part I: Security System Basics Warning Displays and Tones Warning Displays and Tones Priority of Events Your command center emits one of several distinct tones and displays custom text to alert you to system If more than one event occurs, your system sorts them events.
  • Page 14 Part I: Security System Basics Warning Displays and Tones Security System User's Guide 4998122475C...

  • Page 15: Fire Alarms

    Part I: Security System Basics Fire Alarms Fire Alarms Fire alarms are the highest priority events. When a fire If there is more than one point causing an alarm, the point activates, your command center emits a pulsating display will show each point for three seconds before high-pitched fire tone.
  • Page 16 Part I: Security System Basics Fire Alarms If a fire trouble still exists, the display shows Fire Trouble. To remove this display, the fire point(s) must be returned to normal. If you have not cleared the *Alarm Silenced* display and wish to review cleared events, use COMMAND 40.

  • Page 17: Burglary Alarms

    Part I: Security System Basics Burglary Alarms Burglary Alarms Burglary alarms are the second priority. When a The system will now display *Alarm Silenced* and then burglary point activates while your system is armed, the number of points in alarm (### ALARMS) and the...
  • Page 18 Part I: Security System Basics Burglary Alarms Security System User's Guide 4998122475C...

  • Page 19: Fire Trouble And Fire Supervisory Events

    Part I: Security System Basics Fire Trouble and Fire Supervisory Events Fire Trouble and Fire Supervisory Events When a fire trouble or fire supervisory condition Note: Some systems may be programmed to occurs, your command center emits three warble tones, automatically re-sound the command center’s...
  • Page 20 Part I: Security System Basics Fire Trouble and Fire Supervisory Events Viewing Fire Trouble and Fire Supervisory Special Fire Trouble and Fire Supervisory conditions Displays After pressing COMMAND 4 or Silence> soft key, Fire If you silence the command center or clear a trouble or...
  • Page 21 Part I: Security System Basics Non-Fire Point Trouble and Supervisory Events Non-Fire Point Trouble and Supervisory Events Viewing Non-Fire Trouble Events When a trouble event occurs, your command center may be programmed to emit three warble tones, then a After pressing COMMAND 4 or the Silence> soft key, pause (repeatedly).
  • Page 22 Part I: Security System Basics Non-Fire Point Trouble and Supervisory Events Security System User's Guide 4998122475C...

  • Page 23: Special System Trouble Display

    Special System Trouble Display These displays appear on all keypads in the system. See If you fail to turn off the security system before the Standard Displays for a description of each system entry delay time expires, it will sound the burglary tone trouble display.
  • Page 24 Part I: Security System Basics Security System User's Guide 4998122475C...

  • Page 25: Exit Delay Tone And Display

    Part I: Security System Basics Exit Delay Tone and Display Exit Delay Tone and Display After you arm your system, the command center emits Keystroke Checking Tones a repeating beep tone and displays. Valid Entry Area # Area Text is now arming…...
  • Page 26 Part I: Security System Basics Security System User's Guide 4998122475C...

  • Page 27: Silencing An Alarm

    The audible alarm sounds for a specific period of time before it automatically shuts off. If an alarm occurs and Your security system may be programmed to you want to silence the siren before the time expires, automatically seize your telephones when sending simply enter your personal passcode and press ENTER.
  • Page 28 Note: If your system uses telephone lines as its means of communication and telephone service is interrupted, your security system cannot send reports to your security company unless it has an alternate means of transmitting them. Security System User's Guide...
  • Page 29 NOT passcode is not authorized AUTHORIZED appears to perform the function, then **No Authority** will briefly in the display. display on the Command Center. Security System User's Guide 4998122475C...
  • Page 30 COMMAND COMMAND Master Arm Perimeter Partial Perimeter Instant Special Alert Perimeter Delay Bypass a Point Silence Trouble Sounder & Unbypass a Point Clear Trouble Display View Memory Walk Test Reset Sensors Watch Mode Special Alert Security System User's Guide 4998122475C...

  • Page 31: Passcode Protected Commands And Functions

    At the display Enter Passcode and press the ENTER key, The passcode is shown as asterisks (*) when entered and advance from the right side of the display to the left until all passcode digits are entered. Security System User's Guide 4998122475C...
  • Page 32 Part II: System Commands Passcode Protected Commands and Functions Security System User's Guide 4998122475C...

  • Page 33: Turning The System On (Arming)

    Part II: System Commands Turning the System On (Arming) Turning the System On (Arming) Your security system can be turned on (armed) in many To Turn Your Security System On (Arm): different ways, depending on the arming command Enter your passcode and press used.
  • Page 34 Part II: System Commands Security System User's Guide 4998122475C...

  • Page 35: Turning The System Off (Disarming)

    Turning the System Off (Disarming) Turning the System Off (Disarming) Entering your personal passcode turns off your security To Turn Your Security System Off (Disarm): system. When the system is turned on, you must enter Enter your passcode and press ENTER.
  • Page 36 Part II: System Commands Security System User's Guide 4998122475C...
  • Page 37 1 or 2. If an intruder demands that you arm or disarm the security system, you can use your duress passcode. The duress passcode arms or disarms the system and sends a duress report to your security company. There is no alarm tone or visual indication at the premises that the report is sent.
  • Page 38 Part II: System Commands Security System User's Guide 4998122475C...

  • Page 39: Turning The System On (Arming) With Doors Or Windows Open

    Your system’s maximum number of bypassed and/or force armed points is set by your security company. Check with them to learn One of the messages below may display in this number. place of Check Area #. Security System User's Guide 4998122475C...
  • Page 40 Next> soft key will start displaying a summary and then specifics of any bypassed points. Pressing the View Points> soft key will show the specifics for any points that are faulted or bypassed. Security System User's Guide 4998122475C...
  • Page 41 (Force Arm>) or force arm the faulted/bypassed points (Force/Bypass Arm>). Press the appropriate soft key to arm your system with the faulted/bypassed points removed from service. Security System User's Guide 4998122475C...
  • Page 42 Part II: System Commands Turning the System On (Arming) With Doors or Windows Open Security System User's Guide 4998122475C...

  • Page 43: Master Arm ? (Command + 1)

    Press the COMMAND key. passcode to disarm the system. Your cleaning service, a serviceman, or others may also The display use this function to turn on your system when they shows *System leave. Command*. Press the 1 key. Security System User's Guide 4998122475C...
  • Page 44 Exit now! # seconds remaining (# = exit delay time remaining). After the exit delay time expires, the display changes to idle armed text. To disarm your security system, enter your personal passcode and press ENTER. Security System User's Guide 4998122475C...

  • Page 45: Master Arming All Areas

    MASTER ARM?> prompt. Then press the soft key providing the option to arm additional disarmed areas. adjacent to MASTER ARM?>. Upon entering this menu selection, MASTER ARM ALL ? is displayed first. Press Arm> to Master Arm all areas. Security System User's Guide 4998122475C...
  • Page 46 Part II: System Commands Master Arming all Areas Security System User's Guide 4998122475C...
  • Page 47 You must the Command Menu, then press Next> disarm (turn off) the system to enter or exit the repeatedly until you reach the PERIMETR premises. INST ?> prompt. Press the key adjacent to PERIMETR INST ?>. Security System User's Guide 4998122475C...
  • Page 48 Opening a perimeter door before disarming will generate an alarm. If this happens, silence the alarm by turning your system off and call your security company to let them know that it is not an emergency situation. Security System User's Guide 4998122475C...
  • Page 49 Press the key adjacent to Menu> to enter the Command Menu, then press the key adjacent to Next> repeatedly until you reach the PERIMETR DELAY ?> prompt. Press the key adjacent to PERIMETR DELAY ?>. Security System User's Guide 4998122475C...
  • Page 50 Part II: System Commands PERIMETER DELAY ? (COMMAND + 3) The display shows Exit now! # seconds remaining (# = exit delay time remaining). After the exit delay expires, Perimeter On Delayed is displayed. Security System User's Guide 4998122475C...
  • Page 51 *System cleared events can be seen with the View Memory Command*. function (see View Memory ?). Press the 4 key. The Command Center sounder is silenced. Security System User's Guide 4998122475C...
  • Page 52 Part II: System Commands Silence the Trouble Sounder & Clear Trouble Display (COMMAND + 4) Security System User's Guide 4998122475C...

  • Page 53: View Memory ? (Command + 4 + 0)

    Event Command*. Memory. Each time you turn the system on, the Event Memory is Press the 4 key, erased and the *Alarm Silenced* message is cleared. followed by the 0 key. Security System User's Guide 4998122475C...
  • Page 54 If there are no event; events to view, alarm There are summary currently no line, point events in memory text for each displays. alarm event; Return to idle text at any time by pressing <Exit. Security System User's Guide 4998122475C...

  • Page 55: Walk Test ? (Command + 4 + 4)

    Upon initiation, the walk test will test the burglary bell pattern on the bell output and ring the command center burglary bell for 2 seconds. The AC will be disabled for 4 minutes in order to test the system’s battery power. Security System User's Guide 4998122475C...
  • Page 56 Menu, then press Next> repeatedly until you During the Walk Test reach the WALK TEST ?> prompt. Press the you may want to see the WALK TEST ?> soft key. points that remain The burglary bell sounds for 2 seconds. untested. Security System User's Guide 4998122475C...
  • Page 57 Press the Exit> soft key to return to the ### points remain to be tested screen before continuing with the walk test. When all points have been tested, 0 points remain to be tested. is displayed. Security System User's Guide 4998122475C...
  • Page 58 Part II: System Commands WALK TEST ? (COMMAND + 4 + 4) Security System User's Guide 4998122475C...

  • Page 59: Reset Sensors ? (Command + 4 + 7)

    2 and 3 to initiate this function. Press the Menu> key to enter the Command Menu, then press Next> repeatedly until you reach the RESET SENSORS ?> prompt. Press the RESET SENSORS ?> soft key. Security System User's Guide 4998122475C...
  • Page 60 If you can’t reset the detector or sensor contact, WAIT…shows for your security company. approximately 3 seconds and then shows Retrieving Panel Information while retrieving the panel information again before returning to idle disarmed text. Security System User's Guide 4998122475C...

  • Page 61: Watch Mode ? (Command + 6)

    WATCH MODE ? (COMMAND + 6) Description Using Watch Mode: Ensure your With your security system disarmed, you can use watch command center mode to monitor some points. Each time some points shows idle disarmed are faulted (door or window is opened) the command text.
  • Page 62 Part II: System Commands WATCH MODE ? (COMMAND + 6) To disable Watch Mode, press Command 6 again. The command center will display Watch mode is now off. Security System User's Guide 4998122475C...
  • Page 63 Command*. In commercial systems, when you need access to the large overhead doors to receive deliveries, using this Press the 8 key. function will allow you to keep the rest of the building perimeter armed. Security System User's Guide 4998122475C...
  • Page 64 Perimeter On Partial. When performing a COMMAND 8 and no points are faulted or if the points return to normal before the exit delay time expires, the system is turned on as in COMMAND 3. Security System User's Guide 4998122475C...

  • Page 65: Special Alerts (Command + 7 And Command + 9)

    Check with display at your command center your security company for the options they offer. Description: Using COMMAND 7: Ensure your command center shows idle disarmed text. Press the COMMAND key. The display shows *System Command*. Security System User's Guide 4998122475C...
  • Page 66 Press the display at your command center COMMAND key. Description: The display shows *System Command*. Press the 9 key. Security System User's Guide 4998122475C...

  • Page 67: Bypass A Point? (Command + 0)

    The display shows 00). *System Command*. You could use COMMAND 0 to leave a window open over night without initiating an alarm. Also see Turning the System On With Doors or Windows Open. Press the 0 key. Security System User's Guide 4998122475C...
  • Page 68 When the point text of the point you wish to bypass No additional points indicates that there are no appears, points remaining to be bypassed. Security System User's Guide 4998122475C...
  • Page 69 If the bypassed point is a 24-hour point, the message 24Hr Point Bypassed begins scrolling in the display. If the bypassed point is a fire point, the message Fire Point Bypassed scrolls in the display. Security System User's Guide 4998122475C...
  • Page 70 Part II: System Commands BYPASS A POINT? (COMMAND + 0) Security System User's Guide 4998122475C...

  • Page 71: Unbypass A Point? (Command + 0 + 0)

    Unbypassing a point is a way to return a bypassed point in place of steps 2 and 3 to initiate this function. to the security system so that it can once again respond Press the Menu> key to enter the Command to trouble and alarm conditions.
  • Page 72 FRONT DOOR is bypassed. indicates that the point has already been bypassed. If the Unbypass> is selected, FRONT DOOR is now unbypassed displays and indicates the point was successfully unbypassed. Security System User's Guide 4998122475C...

  • Page 73: Security System Limitations

    Security System Limitations Appendix Security System Limitations Not even the most advanced security system can If the AC power supply is OFF and the back-up guarantee protection against burglary, fire, or battery is either missing or dead, sensors will not environmental threats.
  • Page 74 Note: Although having a security system may make you eligible for reduced insurance premiums, the system is no substitute for insurance. Warning devices cannot compensate you for loss of life or property.

  • Page 75: Fire Safety And Evacuation

    Bedroom A smoke detector (indicated in the figure by an inverted “s” in a circle) should be Bed- provided to protect each sleeping area in a Bedroom room home. Security System User's Guide 4998122475C...
  • Page 76 If the sleeping area is above the ground floor, install a means of safely descending outside the building if one does not already exist. Dining Kitchen Bedroom Bedroom Room Living Bedroom Room Fire Security System User's Guide 4998122475C...

  • Page 77: Standard Displays

    Standard Displays Standard Displays Your command center uses standard and custom displays to show the status of the security system. Many standard displays are described below. Your system may not use all of them. Descriptions of your custom text follow.
  • Page 78 Perimeter On Delayed is disarmed. Disarm the area first to perform the function. Indicates that the perimeter is armed (turned on) with entry/exit delay time and displays Perimeter On Delayed. (See Command 3 ) Security System User's Guide 4998122475C...

  • Page 79: System Trouble Displays

    If this display remains or appears frequently, call your security company for service. Entering COMMAND 4 Indicates a problem with or pressing the Silence> soft key silences the trouble the panel. The panel is not buzz. operating. Call your security company for service. Security System User's Guide 4998122475C...
  • Page 80 Your security system makes repeated attempts to Indicates telephone line communicate with the security company. trouble. Call your phone In the event your security system fails to communicate, company from another the command center buzzes phone to report telephone trouble.
  • Page 81 Indicates that one of the 24 Hour Bypass D9210 Access Control This display indicates that Modules (possible of 8 24-hour points have been total) connected to the bypassed. panel has encountered a problem. Contact you security company. Security System User's Guide 4998122475C...
  • Page 82 Appendix System Trouble Displays Security System User's Guide 4998122475C...

  • Page 83: Security System Glossary

    Area monitor your security system 24 hours to your security system. Station a day. Your security system may be To turn your controlled points (burglar programmed to contact the central detection devices) on. When an area is station during alarm conditions,...
  • Page 84 Security System Glossary Entry Delay A programmed delay of system alarm Force Arm To turn on (arm) the security system response that allows you to enter an even though one or more points are armed area through the correct point faulted.
  • Page 85 Appendix Point A detection device, or group of devices connected to your security system. Points display individually at the command center with custom text. The text can describe a single door, motion sensor, smoke detector, or an area such as UPSTAIRS or GARAGE.

  • Page 86: Maintenance And Service

    Appendix Maintenance and Service Maintenance and Service This security system requires very little maintenance; however, you should test the system weekly to ensure it is working properly. A test schedule and maintenance program can be arranged. If you notice a change in operation during normal use or testing, call for service as soon as possible.

  • Page 87: How To Clean The Command Center

    If your command center gets dirty, apply a household glass cleaner to a clean cloth or paper towel and wipe the surface. Do not spray any liquid directly onto the command center. It could run inside the case and damage electrical circuits. Security System User's Guide 4998122475C...
  • Page 88 Appendix Your Alarm Company Your Alarm Company Name: Call This Number Before Testing Security System User's Guide 4998122475C...

Table of Contents