Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZWI71201WA
Summary of Contents for Zanussi ZWI71201WA
- Page 1 User manual Washing Machine ZWI 71201 WA ZWI 71401 WA...
-
Page 2: Table Of Contents
• If the appliance has a child safety device, we recommend you ac- tivate it. General Safety • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not change the specification of this appliance. www.zanussi.com... -
Page 3: Safety Instructions
• Adjust the feet to have the necessary space between the appliance and the carpet. Water connection • Make sure not to cause damage to the water Electrical connection hoses. Warning! Risk of fire and electrical shock. www.zanussi.com... -
Page 4: Product Description
Door opening handle Rating plate Drain pump Adjustable feet Child safety Make sure that children or pets do not climb in- to the drum. To prevent children and pets be- coming trapped inside the drum this machine incorporates a special feature. www.zanussi.com... -
Page 5: Control Panel
On the following page there is a picture of the control panel. It shows the programme selector dial as well as the buttons, pilot lights and the display. These are presented by relevant num- bers on the following pages. www.zanussi.com... - Page 6 (extra rinse), select this option. soiled laundry and at the same time save ener- Some additional rinses will be performed. This option is recommended for people who are al- www.zanussi.com...
- Page 7 • End of programme When the programme has finished the flash- ing zero ( ) is displayed. The pilot light 9 and the pilot light of button 7 go out. The door can be opened. The display shows the following information: www.zanussi.com...
-
Page 8: Washing Programmes
1 – 2 – 3 – 4 SPIN REDUCTION 90° - 30° RINSE HOLD Main wash - Rinses Maximum spin speed at 1200 rpm for model ZWI71201WA QUICK WASH Maximum spin speed at 1400 rpm for model PREWASH ZWI71401WA EASY IRON Max. - Page 9 At the end of the soak (after having emptied out the water) you can select the washing programme (first turn the programme selector dial to , then to the programme and press the button 5). www.zanussi.com...
- Page 10 18 – Rinse Rinses Maximum spin speed at 1200 rpm for model ZWI71201WA (1400 rpm for model ZWI71401WA) SPIN REDUCTION Maximum spin speed at 1400 rpm for model RINSE HOLD ZWI71401WA EASY IRON Max.
-
Page 11: Consumption Values
Stubborn stains may not be removed by just New coloured items may run in the first wash; water and detergent. It is therefore advisable to they should therefore be washed separately the treat them prior to washing. first time. www.zanussi.com... - Page 12 The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and de- gree of soiling. 1) do not use acetone on artificial silk www.zanussi.com...
-
Page 13: First Use
There is a door handle out- risk of water leakage wards. Place the or damage to the laundry in the drum, laundry. one item at a time, shaking them out as much as possible. Close the door. www.zanussi.com... - Page 14 When selecting a programme, the appliance the programme and before you start the pro- proposes automatically the maximum spin gramme. speed provided for that programme. (See You can cancel or modify the delay time at any moment, before you press button 7. www.zanussi.com...
- Page 15 Turn the pro- Press the button 7 to interrupt a programme gramme selector dial to to switch the ma- which is running, the corresponding pilot light chine off. starts blinking. Press the button again to re- start the programme. www.zanussi.com...
-
Page 16: Care And Cleaning
• If it is necessary, wait until the water has downwards and by tive compartment cooled down. pulling it out. Flush it should be removed. out under a tap, to re- move any traces of accumulated powder. www.zanussi.com... - Page 17 • Turn off the water contact your Service tap. Centre. • Unscrew the hose from the tap. • Clean the filter in the hose with a stiff brush. • Screw the hose back onto the tap. Make sure the connection is tight. www.zanussi.com...
-
Page 18: What To Do If
: problem with the water supply. please carry out the checks listed below. • : problem with the water draining. During machine operation it is possible that the • : door open. red pilot light of button 7 blinks, one of the fol- www.zanussi.com... - Page 19 An option or a programme that ends with the water still in the tub or a and/or does not spin: that eliminates all the spinning phases has been selected. • Select the draining or spinning programme. The laundry is not evenly distributed in the drum. • Redistribute the laundry. www.zanussi.com...
- Page 20 In this case, redistribute the load manually and select the machine does not spin: spin programme. • Redistribute the laundry. The load is too small. • Add more items, redistribute the load manually and then select the spinning programme. www.zanussi.com...
-
Page 21: Technical Data
Maximum 0,8 MPa Maximum Load Cotton 7 kg Spin Speed Maximum 1200 rpm (ZWI71201WA) 1400 rpm (ZWI71401WA) Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. - Page 22 The rubber feet are particularly recommended the machine does not touch the wall or other on floating, slippery and wooden floors. kitchen units. Mount the rubber feet to prevent vibration, noises and displacement of the appliance dur- ing operation. www.zanussi.com...
- Page 23 90 cm (35.4'') and no less than 60 cm (23.6'') above floor level. Caution! The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase www.zanussi.com...
- Page 24 SHOWER SINK TOILET BATH BIDET 2. Onto a sink outlet spigot. WASHING DISHWASHER MACHINE RAINWATER ‘RUN-OFF’ FOUL DRAIN SURFACE WATER FOUL SEWERS DRAINS & SEWERS Loop SEWAGE TREATMENT UNTREATED WORKS DISCHARGE TREATED DISCHARGE RIVER RIVER www.zanussi.com...
-
Page 25: Building In
When installing the appliance into the kitchen furniture ensure, if possible, the hoses are 22±1,5 placed in either of the two recesses on the back of the appliance. 595-598 This will help to prevent the hoses from be- coming kinked or trapped. www.zanussi.com... - Page 26 (4) and the plate (5) (Fig. B and E). Mount the counter-magnet (6) and the hinges (1) as previously described. Recommendations regarding the con- struction and fitting of a base when the installation requires an integrated appli- ance to be raised. www.zanussi.com...
-
Page 27: Front View
Position the base into the recess with its front edge as far forward as the adjoining plinth line will allow. The reason for placing the base in this position is to allow a small strip of beading to be fitted in front of the appli- ance feet. www.zanussi.com... -
Page 28: Environment Concerns
Packaging materials then be washed at a lower temperature. The materials marked with the symbol • Measure out detergent according to the wa- recyclable. ter hardness, the degree of soiling and the >PE<=polyethylene quantity of laundry being washed. >PS<=polystyrene www.zanussi.com... - Page 29 www.zanussi.com...
- Page 30 www.zanussi.com...
- Page 31 www.zanussi.com...
- Page 32 www.zanussi.com/shop...