Page 1 MAN-HD3-SOFTW-EN.book Page 1 Wednesday, January 10, 2007 9:33 AM Operation Manual ENGLISH HDD AV NAVIGATION HEAD UNIT AVIC-HD3 Don't forget to register your product on www.pioneer.co.uk (or www.pioneer.eu)
Page 2 MAN-HD3-SOFTW-EN.book Page 2 Wednesday, January 10, 2007 9:33 AM The screens shown in the examples may differ from the actual screens. The actual screens may be changed without notice for performance and function improvements.
Page 3: Manual Overview
Chapters 10 to 14 describe how to operate the AV functions. Please read these chapters when you use a disc in the built-in DVD drive or operate the Pioneer audio equipment connected to the navigation sys- tem.
Page 4: Overview For Each Chapter
MAN-HD3-SOFTW-EN.book Page 2 Wednesday, January 10, 2007 9:33 AM Overview for each chapter Before Using the System For safety reasons, it is particularly important that you fully understand your naviga- tion system before using it. Be sure to read this chapter. Basic Operation Please read this section if you want to operate the navigation system immediately.
Page 5 Using the AV Source (M-CD, iPod , TV) This chapter describes the audio source operations that can be used when Pioneer audio equipment featuring IP-BUS (Multi-CD player, iPod adapter, TV tuner) is connected. Using the AV Source (AV, EXT, AUX)
Page 6: Terminology
MAN-HD3-SOFTW-EN.book Page 4 Wednesday, January 10, 2007 9:33 AM Terminology Before moving on, take a few minutes to read the following information about the conventions used in this manual. They will help you greatly as you learn how to use your new equipment. •...
Page 7: Licence Agreement
INSTALLED ON THE PIONEER PRODUCTS. BY The Software and related documentation are pro- USING THE SOFTWARE INSTALLED ON THE PIO- vided to you “AS IS”. PIONEER AND ITS LICEN- NEER PRODUCTS, YOU AGREE TO BE BOUND SOR(S) (for the purpose of provisions 2 and 3, BY THE TERMS OF THIS AGREEMENT.
Page 8: Limitation Of Liability
Some countries do not allow the exclusion or lim- in this Agreement shall be effective unless itation of incidental or consequential damages, agreed to in writing by Pioneer. If any provision of so the above limitation or exclusion may not this Agreement is declared invalid or unenforcea- apply to you.
Page 9: Tele Atlas End User Licensing Terms
Topografische ondergrond Copyright © dienst MENT”) BETWEEN YOU, THE END USER, AND voor het kadaster en de openbare registers, Apel- PIONEER and its licensors of Data product doorn 2007 (sometimes collectively “Licensors”). BY USING “This data has been approved by Turkish Military...
Page 10 OPERATION OF THE DATA WILL BE UNINTER- THE USE OF OR INABILITY TO USE THE DATA, RUPTED OR ERROR FREE. NO ORAL OR EVEN IF PIONEER, ITS LICENSORS OR SUPPLI- WRITTEN ADVICE GIVEN BY ORDNANCE SUR- ERS HAVE BEEN ADVISED OF THE POSSIBILITY VEY, PIONEER OR ITS LICENSORS AND OF SUCH DAMAGES.
Page 11: About The Data For The Map Database
Sections 2 - 4 and 6 - 11 shall sur- vive the expiration or termination of this Agree- ment. This Agreement may be amended, altered, or modified only by PIONEER. You may not assign any part of this Agreement without PIONEER’ prior written consent. You acknowledge and...
Page 12: Copyright
MAN-HD3-SOFTW-EN.book Page 10 Wednesday, January 10, 2007 9:33 AM Copyright and the “Powered by Gracenote” logo are trademarks of Gracenote. Data Source © 2007 Tele Atlas End-User Licence Agreement © BEV, GZ 1368/2003 © DAV USE OF THIS PRODUCT IMPLIES ©...
Page 13: Other Precautions
MAN-HD3-SOFTW-EN.book Page 11 Wednesday, January 10, 2007 9:33 AM Gracenote may provide in the future and is free to dis- continue its online services at any time. GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FIT- NESS FOR A PARTICULAR PURPOSE, TITLE, AND NON- INFRINGEMENT.
Page 14: Table Of Contents
How to Read the Map Display Licence Agreement 5 How to Use the Map 35 PIONEER AVIC-HD3 5 Switching the view mode 35 Tele Atlas End User Licensing Terms 7 How to view the map of the current location 35...
Page 15 MAN-HD3-SOFTW-EN.book Page 13 Wednesday, January 10, 2007 9:33 AM Route Calculation to Your Home Location or to Setting the Volume for Guidance and Phone 81 Your Favourite Location 53 Customising the Regional Settings 81 Selecting Destination from the Destination Histo- Changing the language for navigation guidance and menu 81 ry and Address Book 54...
Page 16 MAN-HD3-SOFTW-EN.book Page 14 Wednesday, January 10, 2007 9:33 AM Storing the strongest broadcast Screen configuration 125 frequencies 101 Touch key operation 125 Tuning in strong signals 101 Storing and recalling broadcast stations 126 Using radio text 101 Storing the strongest broadcast stations Searching for an RDS station by PTY sequentially 126 information 102...
Page 17 MAN-HD3-SOFTW-EN.book Page 15 Wednesday, January 10, 2007 9:33 AM Setting the rear output and subwoofer Vehicles that Cannot Obtain Speed Pulse controller 140 Data 169 Switching Auto PI seek 141 Conditions Likely to Cause Noticeable Positioning Setting the FM tuning step 141 Errors 169 Selecting the TV signal 141 Troubleshooting 172...
Page 18 MAN-HD3-SOFTW-EN.book Page 16 Wednesday, January 10, 2007 9:33 AM...
Page 19: Before Using The System
MAN-HD3-SOFTW-EN.book Page 17 Wednesday, January 10, 2007 9:33 AM Chapter 1 Before Using the System Important Safety Information Do not operate this navigation system (or the rear view camera option if purchased) if doing so will divert your attention in any way from Before using your navigation system, be sure to the safe operation of your vehicle.
Page 20: Additional Safety Information
MAN-HD3-SOFTW-EN.book Page 18 Wednesday, January 10, 2007 9:33 AM Keep this manual handy as a reference for • When applying the handbrake in order to operating procedures and safety information. view “Video image” or to enable other functions offered by the navigation sys- Pay close attention to all warnings in this tem, park your vehicle in a safe place, and manual and follow the instructions carefully.
Page 21: Features (Characteristics Of This Software)
MAN-HD3-SOFTW-EN.book Page 19 Wednesday, January 10, 2007 9:33 AM Features (Characteristics of this Compatible voice recognition system software) Connecting the supplied microphone will enable voice operation for both the navigation and AV functions. Touch panel key operation It is possible to operate the navigation functions Original image assignment and the Audio functions by using touch panel You can store your own pictures on a CD-R in...
Page 22: Points About Recording
Page 182 Pioneer Service Station. Points about recording Visit Our Website Pioneer does not compensate for the contents that could not be recorded or any loss of Visit us at the following site: recorded data due to a malfunction or failure of the navigation system.
Page 23: Basic Operation
MAN-HD3-SOFTW-EN.book Page 21 Wednesday, January 10, 2007 9:33 AM Chapter 2 Basic Operation Flow from Startup to Termina- Assign a destination by using the touch tion panel key and beginning route guidance, or operating the Audio source. At first, please confirm the positions of the follow- ing features using the “Hardware Manual”.
Page 24: How To Use Navigation Menu Screens
MAN-HD3-SOFTW-EN.book Page 22 Wednesday, January 10, 2007 9:33 AM How to Use Navigation Menu [Info/Phone] menu Screens The basic navigation is performed by using menus. The navigation menu is divided into four menus: [Destination], [Info/Phone], [Map], and [Settings]. Use this menu to check traffic information or select the RDS-TMC station.
Page 25: Basic Navigation
MAN-HD3-SOFTW-EN.book Page 23 Wednesday, January 10, 2007 9:33 AM Basic Navigation [Settings] menu • For safety reasons, you cannot use some of these basic navigation functions while your vehicle is in motion. To enable these functions, you must stop in a safe place Customise the navigation functions so they can and apply the handbrake (see page 18 for be used easily.
Page 26: Calculating Your Destination By Using Address Search
MAN-HD3-SOFTW-EN.book Page 24 Wednesday, January 10, 2007 9:33 AM Calculating your destination by Input the street name. using Address Search The most frequently used function is [Address Search], in which the address is specified and the destination is searched. This section describes how to use [Address Search] and the basics of using the navigation system.
Page 27 MAN-HD3-SOFTW-EN.book Page 25 Wednesday, January 10, 2007 9:33 AM Operation of street name or city name (10) [Street]: input screen (e.g. QWERTY keyboard) Touch if you want to return the street input mode. (This is available only when city name (10) is blank.) (11) [Centre]:...
Page 28 MAN-HD3-SOFTW-EN.book Page 26 Wednesday, January 10, 2007 9:33 AM Touch the street from the list. Route calculation starts. If the selected street has only one matching location, “Route confirmation screen” appears. Proceed to Step 9. Touch the city or area where your destina- tion is located.
Page 29 MAN-HD3-SOFTW-EN.book Page 27 Wednesday, January 10, 2007 9:33 AM Checking the location on the map Operation the street list screen “Location confirmation screen” (1) Calculating the route to the destination Route calculation starts. When the route cal- (1) Number of possible choices culation is completed, “Route confirmation screen”...
Page 30: Checking And Modifying The Route
MAN-HD3-SOFTW-EN.book Page 28 Wednesday, January 10, 2007 9:33 AM Touch [OK] to decide your route. • shows that ferries could not be avoided when the setting [Avoid Ferry] is [On]. • shows for routes that contain streets or bridges that are subject to traffic regulations during a certain time when the setting [Time restrictions] is [On].
Page 31: When The Route Guidance Starts
MAN-HD3-SOFTW-EN.book Page 29 Wednesday, January 10, 2007 9:33 AM You can check the overall shape of your route and Basic items on the screen This section describes only the basic items that the location of destination on the map. are displayed on the Map Mode screen. Refer to the steps after Step 2 of “Checking Details of the map screen Page 35...
Page 32: Modifying The Route Calculation Conditions
MAN-HD3-SOFTW-EN.book Page 30 Wednesday, January 10, 2007 9:33 AM Modifying the Route Calculation Determine which condition takes priority for Conditions route calculation. You can modify the conditions for route calcula- [Fast]*: tion and recalculate the current route. Calculate a route with the shortest travel time to your destination as a priority.
Page 33: Checking The Current Route
MAN-HD3-SOFTW-EN.book Page 31 Wednesday, January 10, 2007 9:33 AM Checking the Current Route The system may calculate a route that includes motorway even if [On] is selected. You can check information about the route Time restrictions between your current location and your destina- This setting controls whether streets or bridges tion.
Page 34: Checking The Entire Route Overview On The Map
MAN-HD3-SOFTW-EN.book Page 32 Wednesday, January 10, 2007 9:33 AM Checking the entire route over- Editing Waypoints view on the map You can select waypoints (locations you want to You can check the entire shape of the current route. visit on the way to your destination) and you can recalculate the route to pass through these loca- Touch [Destination] in the navigation tions.
Page 35: Deleting A Waypoint
MAN-HD3-SOFTW-EN.book Page 33 Wednesday, January 10, 2007 9:33 AM Deleting a waypoint [Manual]: You can manually sort destination and way- You can delete waypoints from the route and then points. Touch the destination and waypoints recalculate the route. (You can delete waypoints on the left side of the screen in the order you successively.) want to visit.
Page 36 MAN-HD3-SOFTW-EN.book Page 34 Wednesday, January 10, 2007 9:33 AM...
Page 37: How To Read The Map Display
MAN-HD3-SOFTW-EN.book Page 35 Wednesday, January 10, 2007 9:33 AM Chapter 3 How to Read the Map Display How to Use the Map How to view the map of the cur- rent location Most of the information provided by your naviga- This example shows a case where [Second tion system can be seen on the map.
Page 38 MAN-HD3-SOFTW-EN.book Page 36 Wednesday, January 10, 2007 9:33 AM Driver’s View Vehicle Dynamics Display Shows a map from the driver’s viewpoint. Indicates the status of your vehicle. (10) (20) • In the Vehicle Dynamics Display mode, (13) the speedometer display may show a dif- (15) ferent speed than your vehicle’s actual (22)
Page 39: Display During Motorway Driving
MAN-HD3-SOFTW-EN.book Page 37 Wednesday, January 10, 2007 9:33 AM Rear View can be displayed at all times (e.g. (18) (19) when monitoring an attached trailer) as a split screen where map information is partially dis- played. Please beware that in this setting, camera image is not resized to fit to screen, and that a portion of camera image may not be viewable.
Page 40: Display Items
MAN-HD3-SOFTW-EN.book Page 38 Wednesday, January 10, 2007 9:33 AM Display items heading up). When the scale of the map is greater than 50 km (25 mile), it is fixed to “North Information with the mark (*) appears only up”. when the route is set. Heading up: Depending on the conditions and settings, The map display always shows the vehicle’s...
Page 41: Roads Without Turn-By-Turn Instructions
Routable roads (the route displayed and high- disappears. lighted in purple) have only basic data and can only be used to plot a navigable route. Pioneer (18) Motorway signs* Show the road number and give directional infor- Navigation will only display a navigable route on mation.
Page 42: Changing The Scale Of The Map
MAN-HD3-SOFTW-EN.book Page 40 Wednesday, January 10, 2007 9:33 AM Changing the scale of the map (1) Scroll cursor The position of scroll cursor shows the location Touching allows you to change the map selected on the current map. scale. Touch and holding allows you to When the scale is 200 m (0.25 mile) or lower, change the scale in smaller step within a range of...
Page 43: Shortcut Menu
MAN-HD3-SOFTW-EN.book Page 41 Wednesday, January 10, 2007 9:33 AM Shortcut menu Viewing the information of a specified location Shortcuts allow you to perform various tasks, An icon appears at registered places (home loca- such as route calculation for the location indi- tion, specific places, address book entries) and cated by the scroll cursor or registering a location places where there is a POI icon or traffic infor-...
Page 44: Setting The Vehicle Dynamics Display
MAN-HD3-SOFTW-EN.book Page 42 Wednesday, January 10, 2007 9:33 AM Acceleration in a forward direction is dis- : Overlay POI played. The + sign indicates acceleration Displays icons for surrounding facilities (POI) while the – sign indicates deceleration. on the map. [Lateral Acceleration]: “Displaying POI on the Map”...
Page 45: Modifying Map Configurations
MAN-HD3-SOFTW-EN.book Page 43 Wednesday, January 10, 2007 9:33 AM Chapter 4 Modifying Map Configurations Close Up View You can select the method to display the close • For safety reasons, these functions are not up view of the intersection. available while your vehicle is in motion. 2D*: To enable these functions, you must stop Displays the close up view with the 2D map.
Page 46 MAN-HD3-SOFTW-EN.book Page 44 Wednesday, January 10, 2007 9:33 AM Show Mute Button Hide: Selects whether to display or hide the voice Hides the icons on the map. guidance mute key on the map. The notification icons will not be available when your vehicle deviates from the route.
Page 47: Selecting The Shortcut
MAN-HD3-SOFTW-EN.book Page 45 Wednesday, January 10, 2007 9:33 AM 3D Landmark : Vicinity Search* You can select whether to display the 3D Find POIs (Points Of Interest) in the vicinity of Landmark on the map. the scroll cursor. “Finding a POI in the Vicinity” Page 51 : Overlay POI* Displays icon for surrounding facilities (POI)
Page 48: Displaying Poi On The Map
MAN-HD3-SOFTW-EN.book Page 46 Wednesday, January 10, 2007 9:33 AM Displaying POI on the Map Viewing the Map Colour Legend Displays icons for the surrounding facilities (POI) You can browse the type of the roads and areas on the map. displayed on the map. Touch [Map] in the navigation menu, then Touch [Map] in the navigation menu, then touch [Overlay POI].
Page 49: Changing The View Mode For The Navigation Map
MAN-HD3-SOFTW-EN.book Page 47 Wednesday, January 10, 2007 9:33 AM Changing the View Mode for the Changing the Setting of Naviga- Navigation Map tion Interruption Screen You can change the map display mode. Set whether to automatically switch to the navi- gation screen from the AV screen when your vehi- You cannot perform this operation in “Scroll cle approaches a guidance point such as an...
Page 50 MAN-HD3-SOFTW-EN.book Page 48 Wednesday, January 10, 2007 9:33 AM...
Page 51: Setting A Route To Your Destination
MAN-HD3-SOFTW-EN.book Page 49 Wednesday, January 10, 2007 9:33 AM Chapter 5 Setting a Route to Your Destination • Searching for POIs by specifying a city name first • For safety reasons, these route-setting Searching for a POI directly functions are not available while your vehicle is in motion.
Page 52: Searching For Pois By Specifying A Category First
MAN-HD3-SOFTW-EN.book Page 50 Wednesday, January 10, 2007 9:33 AM If less than six POIs in a detailed category If the selected POI is the name of a chain are available, the screen for inputting the of outlets and consequently the same store POI name is skipped.
Page 53: Searching For Pois By Specifying A City Name First
MAN-HD3-SOFTW-EN.book Page 51 Wednesday, January 10, 2007 9:33 AM Finding a POI in the Vicinity Touch the detailed category. If the category is not sub-divided into more detailed categories, the list will not be dis- Searching for the facilities played. Proceed to Step 6. around the current position Input the name of the facilities.
Page 54: Searching For The Facilities Around The Scroll Cursor
MAN-HD3-SOFTW-EN.book Page 52 Wednesday, January 10, 2007 9:33 AM Touch [Select Detail]. Touch the desired POI to set your desti- nation. When the route is not set, route calculation starts immediately. “Checking and modifying the route” Page 28 When the route is already set, “Location con- firmation screen”...
Page 55: Finding Your Destination By Specifying The Postcode
MAN-HD3-SOFTW-EN.book Page 53 Wednesday, January 10, 2007 9:33 AM Finding Your Destination by “Checking and modifying the route” Specifying the Postcode Page 28 When the route is already set, “Location con- firmation screen” is shown. If you know the postcode of your destination, you “Checking the location on the map”...
Page 56: Selecting Destination From The Destination History And Address Book
MAN-HD3-SOFTW-EN.book Page 54 Wednesday, January 10, 2007 9:33 AM Selecting Destination from the Registering/deleting POI Short- Destination History and Address cuts Book You can register up to six shortcuts as your favourite POI. You can also change or delete the Any place that has been searched before is registered shortcuts.
Page 57: Deleting A Poi Shortcut
MAN-HD3-SOFTW-EN.book Page 55 Wednesday, January 10, 2007 9:33 AM Touch the POI selection method. [Select All]: Selects all detailed categories that are included in that category. (E.g. all categories of restaurants including Japanese and fast food.) [Select Detail]: Selects one of the detailed categories. Touching a category adds that category to the shortcuts.
Page 58 MAN-HD3-SOFTW-EN.book Page 56 Wednesday, January 10, 2007 9:33 AM...
Page 59: Registering And Editing Locations
MAN-HD3-SOFTW-EN.book Page 57 Wednesday, January 10, 2007 9:33 AM Chapter 6 Registering and Editing Locations Registering Your Home and Your Favourite Location • For safety reasons, these functions are not available while your vehicle is in motion. You can register one home location and one To enable these functions, you must stop favourite location.
Page 60: Registering A Location Into Address Book
MAN-HD3-SOFTW-EN.book Page 58 Wednesday, January 10, 2007 9:33 AM Registering a location by Address Touch [OK]. Completes the registration. Book Registering a Location into Touch [Address Book] in the Destination Address Book menu. Touch [Add]. The Address Book can store up to 400 regis- tered locations.
Page 61: Viewing The Address Book
MAN-HD3-SOFTW-EN.book Page 59 Wednesday, January 10, 2007 9:33 AM Viewing the Address Book Sorts the items in the list alphabetically. This Touch [Destination] in the navigation is the default sorting order. menu, then touch [Address Book]. Active if there are items in the list and cur- (4) (5) rent sort is not alphabetically.
Page 62 MAN-HD3-SOFTW-EN.book Page 60 Wednesday, January 10, 2007 9:33 AM (1) Name You can enter the desired name. (2) Pronunciation When you approach a registered location You can enter the desired pronunciation inde- while travelling pendently from the name. The registered pro- When a location with a registered sound nunciation is used for voice recognition.
Page 63 MAN-HD3-SOFTW-EN.book Page 61 Wednesday, January 10, 2007 9:33 AM [Repeat]: If nothing is entered in the text box, you You can reconfirm the pronunciation of the cannot use that item as the voice com- name you entered. mands. No sounds can be output during Entering or changing a phone number If the pronunciation is not the desired one, Touch [Phone #].
Page 64: Deleting The Entry In "Address Book
MAN-HD3-SOFTW-EN.book Page 62 Wednesday, January 10, 2007 9:33 AM pictures by burning them onto a CD-R (-RW) with Touch the screen to change its position, your PC and inserting it into the navigation sys- then touch [OK]. tem. Here, a method for changing the picture is described with an example of loading a picture stored on a CD-R (-RW) onto the navigation sys- tem.
Page 65: Destination History Operations
MAN-HD3-SOFTW-EN.book Page 63 Wednesday, January 10, 2007 9:33 AM Destination History Operations Deleting the entry in “Destination History” The points to which a route has been calculated Items in the Destination History can be in the past are automatically saved in deleted.
Page 66 MAN-HD3-SOFTW-EN.book Page 64 Wednesday, January 10, 2007 9:33 AM...
Page 67: Using Traffic Information
MAN-HD3-SOFTW-EN.book Page 65 Wednesday, January 10, 2007 9:33 AM Chapter 7 Using Traffic Information Using RDS-TMC Information Viewing traffic list Traffic Information is displayed on screen in a list. You can check real-time traffic information trans- This allows you to check how many traffic inci- mitted by the Traffic Message Channel (TMC) of dents have occurred, their location and their dis- the FM Radio Data System (RDS) on the screen.
Page 68: Confirming Traffic Information On The Map
MAN-HD3-SOFTW-EN.book Page 66 Wednesday, January 10, 2007 9:33 AM For the list displayed when you touch [Traffic The method for checking the content dis- List], the list will be sorted according to the played on the screen is the same for linear distance from the vehicle position to the “Checking traffic information”.
Page 69: Setting An Alternative Route To Avoid Traffic Jams
MAN-HD3-SOFTW-EN.book Page 67 Wednesday, January 10, 2007 9:33 AM Setting an alternative route to Checking traffic information manually Touching the notification icon on the map screen avoid traffic jams allows you to check traffic information on your The navigation system checks whether or not route while icon is displayed.
Page 70: Selecting Traffic Information To Display
MAN-HD3-SOFTW-EN.book Page 68 Wednesday, January 10, 2007 9:33 AM On this screen, you can select the following Touch [OK]. items: The selected traffic information icon is added List: to the screen. Only three proximate traffic events on your The following types of traffic incidents can- route are listed in this traffic list.
Page 71 MAN-HD3-SOFTW-EN.book Page 69 Wednesday, January 10, 2007 9:33 AM When the service provider name is not available, the station name or frequency will be shown instead. If available providers cannot be displayed on one screen, touch to view the remaining providers. When the tuning has failed, select another service provider or try again after moving to another location.
Page 72 MAN-HD3-SOFTW-EN.book Page 70 Wednesday, January 10, 2007 9:33 AM...
Page 73: Using Hands-Free Phoning
MAN-HD3-SOFTW-EN.book Page 71 Wednesday, January 10, 2007 9:33 AM Chapter 8 Using Hands-free Phoning Hands-free Phoning Overview Please read “Notes for hands-free phoning” for your reference. “Notes for hands-free phoning” Page 80 When the power of the navigation system • For your safety, avoid talking on the phone turns off, the Bluetooth connection is also dis- as much as possible while driving.
Page 74: Setting Up For Hands-Free Phoning
“Connecting a registered mobile phone” Page 73 The default device name displayed on the mobile phone is [PIONEER HDD NAVI]. The default password is [1111]. If registration fails, repeat the procedure Operating from the navigation system from the beginning.
Page 75 Editing the device name the mobile phone selected as a target of connec- You can change the device name to be displayed tion. However, connect the mobile phone manu- on your mobile phone. (Default is [PIONEER ally in the following cases: HDD NAVI].)
Page 76: Receiving A Phone Call
MAN-HD3-SOFTW-EN.book Page 74 Wednesday, January 10, 2007 9:33 AM Answering an incoming call Touch [Info/Phone] in the navigation menu, and then touch [Phone Menu]. The system informs you that it is receiving a call by displaying a message and producing a ring Touch [Phone Settings].
Page 77 MAN-HD3-SOFTW-EN.book Page 75 Wednesday, January 10, 2007 9:33 AM Input the phone number, and then touch To end the call, touch at the top right to make a call. of the screen. Up to 30 entries for each of the dialled number and received call histories are recorded automatically.
Page 78 MAN-HD3-SOFTW-EN.book Page 76 Wednesday, January 10, 2007 9:33 AM Before using this function, you need to set the Perform [POI Search] or [Vicinity Search] phone number from the phone book to “Dial and display the detail information. Favourites”. Operation of [POI Search] Page 49 Operation of [Vicinity Search] Page 51...
Page 79: Transferring The Phone Book
MAN-HD3-SOFTW-EN.book Page 77 Wednesday, January 10, 2007 9:33 AM Transferring the phone book [No]: Keeps the current entries and then adds new You can transfer the data from the phone book data to the phone book. (Duplicate data can- stored in your mobile phone to the phone book not be consolidated.) stored in the navigation system.
Page 80: Editing The Entry In "Phone Book
MAN-HD3-SOFTW-EN.book Page 78 Wednesday, January 10, 2007 9:33 AM Touch [Info/Phone] in the Navigation Select the entry you want to edit. menu, and then touch [Phone Menu]. Touch [Dial Favourites]. Touch [Set] on any of [Favourite 1] – [Favourite 5]. (1) Name Enter the name to be displayed in the phone book.
Page 81: Editing The Received Call Or Dialled Number History
MAN-HD3-SOFTW-EN.book Page 79 Wednesday, January 10, 2007 9:33 AM Deleting data (4) Picture Sets the image to be displayed when a call is Touch [Info/Phone] in the Navigation received. menu, and then touch [Phone Menu]. “Customising the incoming call picture for a phone book entry”...
Page 82 MAN-HD3-SOFTW-EN.book Page 80 Wednesday, January 10, 2007 9:33 AM Deleting data • If the person on the other end of the phone call cannot hear the conversation due to an echo, Touch [Info/Phone] in the Navigation decrease the volume level for hands-free phon- menu, and then touch [Phone Menu].
Page 83: Modifying The General Settings For Navigation Functions
MAN-HD3-SOFTW-EN.book Page 81 Wednesday, January 10, 2007 9:33 AM Chapter 9 Modifying the General Settings for Navigation Functions Beep This setting controls the beep tone volume for • For safety reasons, these functions are not navigation. available while your vehicle is in motion. Phone Ringtone To enable these functions, you must stop This setting controls the incoming ring tone...
Page 84: Setting The Time Difference
MAN-HD3-SOFTW-EN.book Page 82 Wednesday, January 10, 2007 9:33 AM Touch the language that you want to use. If necessary, set to summer time. Once you change the language, the system Summer time is off by default. Touch restarts. [Summer Time] to change the time if you are in the summer time period.
Page 85: Changing The Unit Between Km And Miles
MAN-HD3-SOFTW-EN.book Page 83 Wednesday, January 10, 2007 9:33 AM Checking the Setting Related [AZERTY]: with Hardware The hardware status, including the driving status of a vehicle, positioning status by satellite, learn- ing status of the 3D sensor, and cable connection Changing the unit between km status, can be checked.
Page 86: Checking Sensor Learning Status And Driving Status
MAN-HD3-SOFTW-EN.book Page 84 Wednesday, January 10, 2007 9:33 AM Checking sensor learning status (4) Installation Position The installation position of the navigation sys- and driving status tem is shown. That indicates whether the installation position of the navigation system Touch [Settings] in the navigation menu, is correct or not.
Page 87: Correcting The Installation Angle
MAN-HD3-SOFTW-EN.book Page 85 Wednesday, January 10, 2007 9:33 AM Touch [Settings] in the navigation menu, To clear values... then touch [Hardware]. If you want to delete the learned results stored in Touch [Installation Angle Setup]. [Distance], [Speed Pulse] or [Learning Sta- tus], touch the relevant result, then touch [Yes].
Page 88: Registering The Home Location And Favourite Location
MAN-HD3-SOFTW-EN.book Page 86 Wednesday, January 10, 2007 9:33 AM Touch [Settings] in the navigation menu, Point the scroll cursor to the location you then touch [Hardware]. want to register and touch [OK]. The location is registered, and the Edit regis- Touch [Hard Disk Info].
Page 89: Limitations For Importing Pictures
“Pictures” in the CD-R item: (-RW), and store the picture files in this folder. [Back to Original], [Back to PIONEER (Up to 200 picture files can be used in total, Original]: including pictures that are already stored in...
Page 90: Using The Demonstration Guidance
Touch the screen to adjust the current position Navigation System. and direction of the vehicle displayed on the map. [PIONEER Original] Touch [Settings] in the navigation menu, then touch [Modify Current Location]. Scroll to the position where you want to set, then touch [OK].
Page 91: Using The Av Source (Built-In Dvd Drive And Radio)
MAN-HD3-SOFTW-EN.book Page 89 Wednesday, January 10, 2007 9:33 AM Chapter 10 Using the AV Source (Built-in DVD Drive and Radio) Selecting a source You can play or use the following sources with the navigation system. Select a source on “AV Source Menu” •...
Page 92: About Steering Remote Control
MAN-HD3-SOFTW-EN.book Page 90 Wednesday, January 10, 2007 9:33 AM [CD/ROM (MP3)/DVD] (built-in DVD drive) – [LIBRARY] (Music library) – [FM] (FM tuner) – [AM] (AM tuner) – [iPod] (iPod) – [M-CD] About Steering Remote Control (multi-CD) – [TV] (television) – [AV INPUT] When using the “CD-SR1”...
Page 93: Viewing The Audio Operation Screen And Display- Ing The Audio Settings Menu
MAN-HD3-SOFTW-EN.book Page 91 Wednesday, January 10, 2007 9:33 AM Viewing the audio operation screen and displaying the Audio Set- tings menu Normal screen (e.g. CD) Touch (1) Information plate Displays the information (e.g. track title) about the source being played. (2) Touch panel keys Touch to operate the source being played.
Page 94: Operating A Music Cd
MAN-HD3-SOFTW-EN.book Page 92 Wednesday, January 10, 2007 9:33 AM Operating a Music CD Screen configuration You can play a normal music CD using the built- in DVD drive of the navigation unit. This section describes that operations. Selecting [CD] as the source Press the OPEN CLOSE button and insert a disc you want to play to disc loading slot.
Page 95: Touch Key Operation
MAN-HD3-SOFTW-EN.book Page 93 Wednesday, January 10, 2007 9:33 AM title, and artist’s name. These discs are called You can also perform these operations by CD-TEXT discs. using the TRK (4/6) button. When multiple options for the title information Fast rewind is cancelled when it reaches the are found or no title information exists, [–] is beginning of the first track on the disc.
Page 96: Operating The Cd-Rom (Mp3 Disc)
MAN-HD3-SOFTW-EN.book Page 94 Wednesday, January 10, 2007 9:33 AM Operating the CD-ROM (MP3 disc) (4) Track indicator Shows the track number and file name of the track currently playing. When an ID3 tag has You can play an MP3 disc using the built-in DVD been encoded on the file, the track title will be drive of the navigation unit.
Page 97 MAN-HD3-SOFTW-EN.book Page 95 Wednesday, January 10, 2007 9:33 AM rent track. Touching again will skip to the previ- The information marked with an asterisk (*) is ous track. displayed only when an ID3 tag has been Touch and hold: Fast rewind or forward encoded on MP3 files on the disc.
Page 98: Notes On Playing Mp3 Disc
MAN-HD3-SOFTW-EN.book Page 96 Wednesday, January 10, 2007 9:33 AM Notes on playing MP3 disc Operating the DVD When playing discs with MP3 files and audio data (CD-DA) such as CD-EXTRA and MIXED- MODE CDs, both types can be played only by •...
Page 99: Touch Key Operation
MAN-HD3-SOFTW-EN.book Page 97 Wednesday, January 10, 2007 9:33 AM (3) Repeat range indicator With some discs, the icon may be dis- Shows which repeat range has been selected. played, meaning that the operation is not valid. (4) Title number indicator Shows the title number currently playing.
Page 100: Searching For A Desired Scene, Starting Play
MAN-HD3-SOFTW-EN.book Page 98 Wednesday, January 10, 2007 9:33 AM • Chapter Repeat – Repeat just the current (16) Decide the item When you select a certain video item, play- chapter back starts from the selected item. When you • Title Repeat – Repeat just the current title select an item with a submenu, the next menu If you perform chapter (title) search, fast for- screen will appear.
Page 101: Entering The Numerical Commands
MAN-HD3-SOFTW-EN.book Page 99 Wednesday, January 10, 2007 9:33 AM Entering the numerical com- Operating the Radio (FM) mands You can listen to the radio by using the navigation You can use this function when you need to enter system. This section describes operations for a numerical command during DVD playback.
Page 102: Touch Key Operation
MAN-HD3-SOFTW-EN.book Page 100 Wednesday, January 10, 2007 9:33 AM (8) LOCAL indicator Touch keys (page2) Shows when local seek tuning is on. (9) Preset number indicator Shows what preset has been selected. (10) (10) Programme service name indicator (12) Shows the programme service name (station name) of current station.
Page 103: Storing The Strongest Broadcast Frequencies
MAN-HD3-SOFTW-EN.book Page 101 Wednesday, January 10, 2007 9:33 AM (6) Display and store the radio text Touch [Local]. “Using radio text” Page 101 Touch [On] to turn local seek tuning on. (7) Search for an RDS station by PTY infor- To turn local seek tuning off, touch [Off].
Page 104: Searching For An Rds Station By Pty Information
MAN-HD3-SOFTW-EN.book Page 102 Wednesday, January 10, 2007 9:33 AM Receiving traffic announce- Display the radio text you want to store in memory. ments “Displaying radio text” Page 101 TA (traffic announcement standby) lets you receive traffic announcements automatically, no Press and hold any of the keys 1 – 6 to matter what source you are listening to.
Page 105: Using News Programme Interruption
MAN-HD3-SOFTW-EN.book Page 103 Wednesday, January 10, 2007 9:33 AM Only TP and other enhanced network’s TP Indicator Implication stations are tuned in during seek tuning or (No display) Information interruption is turned OFF, and no data is being received. BSM when TA is on. Using news programme inter- Receiving PTY alarm broadcasts ruption...
Page 106: Using Pi Seek
MAN-HD3-SOFTW-EN.book Page 104 Wednesday, January 10, 2007 9:33 AM Using PI Seek If the navigation system fails to find a suitable alternative frequency, or if you are listening to a broadcast and the reception becomes weak, the navigation system will automatically search for a different station with the same programming.
Page 107: Pty List
MAN-HD3-SOFTW-EN.book Page 105 Wednesday, January 10, 2007 9:33 AM PTY list General Specific Type of programme News&Inf News News Affairs Current affairs Info General information and advice Sport Sports Weather Weather reports/meteorological information Finance Stock market reports, commerce, trading, etc. Popular Pop Mus Popular music...
Page 108: Operating The Radio (Am)
MAN-HD3-SOFTW-EN.book Page 106 Wednesday, January 10, 2007 9:33 AM Operating the Radio (AM) Touch key operation Touch the source icon and then touch You can listen to the radio by using the navigation [AM] to select the radio (AM). system. This section describes operations for When the source icon is not displayed, you Radio (AM).
Page 109: Storing The Strongest Broadcast
MAN-HD3-SOFTW-EN.book Page 107 Wednesday, January 10, 2007 9:33 AM (4) Store the strongest broadcast frequen- cies “Storing the strongest broadcast frequen- cies” Page 107 Storing the strongest broadcast frequencies BSM (best stations memory) lets you automati- cally store the six strongest broadcast frequen- cies under preset tuning keys P1 –...
Page 110 MAN-HD3-SOFTW-EN.book Page 108 Wednesday, January 10, 2007 9:33 AM...
Page 111: Using The Av Source (Music Library)
MAN-HD3-SOFTW-EN.book Page 109 Wednesday, January 10, 2007 9:33 AM Chapter 11 Using the AV Source (Music Library) You can record tracks from a music CD to the (3) Recording indicator Shows the recording status. (Red) indicates hard disk in the navigation system. The music that recording is in progress.
Page 112: Recording All Tracks In A Cd
MAN-HD3-SOFTW-EN.book Page 110 Wednesday, January 10, 2007 9:33 AM Recording a CD manually “Assigning another candidate for title infor- mation” Page 120 You can record only your favourite tracks in the ® If no title information exists in the Gracenote Database on the built-in hard disk drive, the [REC Mode] is set to [Manual].
Page 113: Notes On Cd Recording
MAN-HD3-SOFTW-EN.book Page 111 Wednesday, January 10, 2007 9:33 AM Music Library Play – When you switch to another source, and then return to the CD source. – When you turn off the ignition switch of the You can play back or edit the tracks recorded in vehicle, and then restart the engine.
Page 114: Touch Key Operation
MAN-HD3-SOFTW-EN.book Page 112 Wednesday, January 10, 2007 9:33 AM “Playlist”, and the icon indicates that the item If you try to record one playlist more than the is a “Track”. number listed above, the oldest playlist will be deleted. Title display Music recognition technology and related data Touch key operation ®...
Page 115 MAN-HD3-SOFTW-EN.book Page 113 Wednesday, January 10, 2007 9:33 AM (5) Display group selection screen When the range of repeat play is Track You can search a track from categories. Repeat, if you perform scan play, the repeat- ing range changes to Playlist Repeat. Search for a playlist Page 113 When you find the desired track, touch...
Page 116: Creating A Playlist With A Customised Order
MAN-HD3-SOFTW-EN.book Page 114 Wednesday, January 10, 2007 9:33 AM Creating a playlist with a cus- Searching the playlist by artist Select a playlist formed by an artist, and play it tomised order back. You can register your favourite tracks as a playl- Touch [Search].
Page 117: Editing A Playlist Or Tracks
MAN-HD3-SOFTW-EN.book Page 115 Wednesday, January 10, 2007 9:33 AM Editing a playlist or tracks Registering multiple tracks at a time You can edit the tracks or playlist recorded in the Play back the playlist that contains the Music library. tracks you want to register. Only the playlists and tracks in the [Albums] Touch to display the list of playl-...
Page 118 MAN-HD3-SOFTW-EN.book Page 116 Wednesday, January 10, 2007 9:33 AM Touch (5) Delete the playlist The system enters the playlist edit mode. “Deleting a playlist” Page 119 (6) Delete the selected tracks from that playl- “Deleting a track from the playlist” Page 119 (7) Update title information “Assigning another candidate for title infor-...
Page 119: Touch
MAN-HD3-SOFTW-EN.book Page 117 Wednesday, January 10, 2007 9:33 AM (4) Change genre Enter a new character string, and then touch [OK]. “Changing the genre of a track” Page 120 Touch [Small] to enter lowercase letters. (5) Change the order to play back tracks Touch [Caps.] to enter uppercase letters.
Page 120: Renaming An Artist Name In The Playlist Or Track
MAN-HD3-SOFTW-EN.book Page 118 Wednesday, January 10, 2007 9:33 AM Sorting the playlists Enter the playlist edit mode or track edit mode. The playback order of playlists in the group can be changed. “Switching to the edit mode” Page 115 If there is only one playlist, the playback order Touch cannot be changed.
Page 121: Deleting A Playlist
MAN-HD3-SOFTW-EN.book Page 119 Wednesday, January 10, 2007 9:33 AM Deleting a track from the playlist Repeat Step 3 to Step 5 to change the playback order of other playlists. You can delete tracks from the playlist. If you delete a track in the [Albums] group, Touch [ESC].
Page 122: Assigning Another Candidate For Title
Database “Switching to the edit mode” Page 115 will be available in the future. You can download the latest update from Pioneer Touch [Genres]. website by using your PC. To install the Select the desired genre from the list. update, burn the data onto a CD-R(-RW) and insert it into your navigation system.
Page 123: Using The Av Source (M-Cd, Ipod®, Tv)
MAN-HD3-SOFTW-EN.book Page 121 Wednesday, January 10, 2007 9:33 AM Chapter 12 Using the AV Source (M-CD, iPod®, TV) When Pioneer audio equipment is connected to (4) Playback method indicator Shows which repeat range has been selected. the navigation system using IP-BUS or AV-BUS,...
Page 124 MAN-HD3-SOFTW-EN.book Page 122 Wednesday, January 10, 2007 9:33 AM (1) Change the disc in the magazine (8) Scan play The first 10 seconds of each track of the current (2) Playback and Pause disc (or the first track of each disc) are played. Touching ;...
Page 125: Operating The Ipod
When playing a song, Song title, Artist name, and When you use the iPod (sold separately) with Album title are displayed. this Navigation System, Pioneer iPod adapter is required. Touch key operation iPod is a trademark of Apple Computer, Inc., registered in the U.S.
Page 126: Browsing For A Song
MAN-HD3-SOFTW-EN.book Page 124 Wednesday, January 10, 2007 9:33 AM (4) Narrow down the songs to play back If you select [Songs], proceed to step 4. You can narrow down the choices of songs to When you select [Artists], [Albums] or play from five categories.
Page 127: Operating The Tv Tuner
MAN-HD3-SOFTW-EN.book Page 125 Wednesday, January 10, 2007 9:33 AM Operating the TV tuner (5) Preset list display Shows the preset list. Touch key operation • For safety reasons, visual images cannot Touch the source icon and then touch be viewed while your vehicle is in motion. [TV] to select the TV tuner.
Page 128: Storing And Recalling Broadcast Stations
MAN-HD3-SOFTW-EN.book Page 126 Wednesday, January 10, 2007 9:33 AM Selecting the country group (4) Change band Touching [Band] switches between “TV 1” and “TV 2”. Touch [Area]. (5) Select the country group Touch [Up] or [Down] to select the appro- “Selecting the country group”...
Page 129: Using The Av Source (Av, Ext, Aux)
(EXT) “Switching the automatic and manual func- tion” Page 129 The term “external unit” refers to future Pioneer devices that are not currently planned for, or Touch key operation devices that allow control of basic functions although they are not fully controlled by the navi- Touch the source icon and then touch gation system.
Page 130: Operate The External Unit By Using 1 Key
MAN-HD3-SOFTW-EN.book Page 128 Wednesday, January 10, 2007 9:33 AM Operate the external unit by Touch keys using 1 key – 6 key The external unit can be operated by transmitting the operating commands set to 1 key – 6 key. Touch [1 –...
Page 131: Switching The Automatic And Manual Function
MAN-HD3-SOFTW-EN.book Page 129 Wednesday, January 10, 2007 9:33 AM Switching the automatic and Operating the AUX input source (AUX) manual function You can turn automatic and manual function on An IP-BUS-RCA Interconnector such as the CD- or off. You can switch between Auto and Manual RB20/CD-RB10 (sold separately) lets you connect functions of the external unit connected.
Page 132 MAN-HD3-SOFTW-EN.book Page 130 Wednesday, January 10, 2007 9:33 AM...
Page 133: Customising The Audio Setting Related With Audio Visual
MAN-HD3-SOFTW-EN.book Page 131 Wednesday, January 10, 2007 9:33 AM Chapter 14 Customising the Audio Setting related with Audio Visual How to Operate the Audio Set- Various settings are available with the audio source according to your audiovisual needs. This tings screen chapter describes the methods of changing the various settings and setting the LCD panel.
Page 134: Adjusting Equaliser Curves
MAN-HD3-SOFTW-EN.book Page 132 Wednesday, January 10, 2007 9:33 AM Recalling equaliser curves equaliser curve settings will be memorised in Custom1. There are six stored equaliser curves which you • A Custom2 curve can be created common to can easily recall. Here is a list of the equaliser all sources.
Page 135: Setting The Simulated Sound Stage
MAN-HD3-SOFTW-EN.book Page 133 Wednesday, January 10, 2007 9:33 AM Touch 4 or 6 to select the equaliser band When you set staging to an option other to adjust. than [Off], the high pass filter (HPF) set- Each time you touch 4 or 6 selects equaliser ting turns [Off].
Page 136: Using Subwoofer Output
MAN-HD3-SOFTW-EN.book Page 134 Wednesday, January 10, 2007 9:33 AM Using non fading output When the rear output setting is Rear SP Sub.w, you cannot adjust front/rear speaker When the non fading output setting is on, the balance. audio signal does not pass through the naviga- “Setting the rear output and subwoofer tion system’s low pass filter (for the subwoofer), controller”...
Page 137: Adjusting Source Levels
MAN-HD3-SOFTW-EN.book Page 135 Wednesday, January 10, 2007 9:33 AM Customising the System Set- Touch 4 or 6 to select cut-off frequency. tings Items Each time you touch 4 or 6 selects cut-off frequencies in the following order: 50 – 80 – 125 (Hz) System Settings lets you perform system set up When Preout (the subwoofer controller set- of different settings for navigation system.
Page 138: Setting Up The Built-In Dvd Drive
MAN-HD3-SOFTW-EN.book Page 136 Wednesday, January 10, 2007 9:33 AM Setting up the built-in DVD Setting assist subtitles on or off Assist subtitles offer explanations for the aurally drive impaired. However, they are only displayed if they You can change the preference for playing a DVD are recorded on the DVD.
Page 139: Changing The Wide Screen Mode
MAN-HD3-SOFTW-EN.book Page 137 Wednesday, January 10, 2007 9:33 AM When playing discs that do not hove a pan- The parental lock level is recorded on the scan system, the disc is played back with disc. You can confirm it by looking at the [Letter Box] even if you select the disc package, the included literature or the [Panscan] setting.
Page 140: Setting For Rear View Camera
[Cinema] (cinema): A picture is enlarged by the same proportion as Full or Zoom in the horizontal direction • Pioneer recommends the use of a camera and by an intermediate proportion between which outputs mirror reversed images, Full and Zoom in the vertical direction; ideal...
Page 141: Switching The Auxiliary Setting
[EXT], the “Video The navigation voice guidance itself can- image” of the Pioneer external unit can be not be attenuated or muted. If you want to displayed. mute the navigation guidance voice tem-...
Page 142: Changing The Voice Output Of The Navigation Guidance
MAN-HD3-SOFTW-EN.book Page 140 Wednesday, January 10, 2007 9:33 AM Changing the voice output of the • Audio SCRN – The clock is not overlaid on the “Video image” navigation guidance Setting the CD recording mode You can set the speaker to output the navigation guidance and phone voice, etc.
Page 143: Switching Auto Pi Seek
Selecting the TV signal Touch [Rear SP] in the System Settings menu. This setting is required when a Pioneer TV tuner is connected using the AV-BUS. (This setting is Touch [Full] or [Sub.w] to switch the rear not necessary otherwise.) If the image cannot be output setting.
Page 144: Operating The Picture Adjustment
MAN-HD3-SOFTW-EN.book Page 142 Wednesday, January 10, 2007 9:33 AM Operating the picture adjust- Press the AV button to switch Audio oper- ation screen. ment Touch the source icon and then touch [REAR SCREEN]. • For safety reasons, these functions are not available while your vehicle is in motion.
Page 145: Switching The Backlight On Or Off
MAN-HD3-SOFTW-EN.book Page 143 Wednesday, January 10, 2007 9:33 AM – AV INPUT/EXT – Rear view camera image – Navigation map and menu screen The picture adjustment may not be availa- ble with some rear view cameras. Because of the LCD screen characteris- tics, you may not be able to adjust the screen at low temperatures.
Page 146: Language Code Chart For Dvd
MAN-HD3-SOFTW-EN.book Page 144 Wednesday, January 10, 2007 9:33 AM Language Code Chart for DVD Language (code), input code Language (code), input code Language (code), input code Japanese (ja), 1001 Guarani (gn), 0714 Pashto, Pushto (ps), 1619 English (en), 0514 Gujarati (gu), 0721 Quechua (qu), 1721 French (fr), 0618 Hausa (ha), 0801...
Page 147: Operating Your Navigation System With Voice
Basics of Voice Operation If you operate using the “CD-SR1” Steering Your Pioneer navigation system uses the latest in Remote Control (sold separately), the follow- voice recognition technology. You can use voice ing buttons can be used for operation: commands to operate many of its functions.
Page 148: To Start Voice Operation
MAN-HD3-SOFTW-EN.book Page 146 Wednesday, January 10, 2007 9:33 AM To start voice operation When you say “Voice Help”, the navigation system pronounces the displayed words that can be vocalised. No sounds can be output during If no voice icon is displayed, check to see Touch the VOICE icon.
Page 149: Tips For Voice Operation
MAN-HD3-SOFTW-EN.book Page 147 Wednesday, January 10, 2007 9:33 AM Tips for Voice Operation An Example of Voice Operation For your voice commands to be correctly recog- Search for POI in vicinity nised and interpreted, ensure that conditions are In this example, you want to search for the near- suitable for recognition.
Page 150: Search For The Playlist
MAN-HD3-SOFTW-EN.book Page 148 Wednesday, January 10, 2007 9:33 AM Search for the playlist The message “Vicinity search. Please request POI category.” appears, and the In this example, you want to search for a playlist navigation system pronounces that message. and play that playlist. Say “Petrol Station”.
Page 151: Available Voice Commands
MAN-HD3-SOFTW-EN.book Page 149 Wednesday, January 10, 2007 9:33 AM Available Voice Commands This section describes the flow and available commands of each voice operation. Depending on the selected language in [Regional Settings], the voice operation works as below. [Language] in [Regional Settings] The language for voice operation English, Swedish, Danish, Norwegian English...
Page 152: Basic Commands For Voice Operation
MAN-HD3-SOFTW-EN.book Page 150 Wednesday, January 10, 2007 9:33 AM You can skip the commands with the mark (*). For example, in case search by Point of interest, the system can recognise the command even if you say “Vicinity Search” without saying “Destination”. If some candidates have been found, the candidate list appears.
Page 153 MAN-HD3-SOFTW-EN.book Page 151 Wednesday, January 10, 2007 9:33 AM Set the map location as your destination Scroll the navigation map or switch the scroll mode from search result screen. Basic Operation* Set As Destina- tion If the route already set, touch VOICE icon to start route calculation. If there is no route, the system starts the route calculation.
Page 154: Voice Commands Related To Hands-Free Phoning
MAN-HD3-SOFTW-EN.book Page 152 Wednesday, January 10, 2007 9:33 AM Voice commands related to hands-free phoning The following verbal commands can be used both in navigation screen and audio operation screen. Operating the mobile phone featuring Bluetooth technology Call* Telephone Book <Registered phone book’s pronunciation>...
Page 155: After Checking Traffic Information Manually
MAN-HD3-SOFTW-EN.book Page 153 Wednesday, January 10, 2007 9:33 AM Operation for Music Library AV Operation* Music Search* Album <Album Playlist name> Playback the selected album playlist. AV Operation* Music Search* <Album Playlist name> Playback the selected album playlist. (Note 2) AV Operation* Music Search* Artist...
Page 156 MAN-HD3-SOFTW-EN.book Page 154 Wednesday, January 10, 2007 9:33 AM Location screen (B) The following commands can be vocalised: Set As Destination Same as above. Set as Waypoint Same as above. Display Map Same as above. Next See the next POI. Previous See the previous POI.
Page 157: Other Voice Commands
MAN-HD3-SOFTW-EN.book Page 155 Wednesday, January 10, 2007 9:33 AM Other Voice Commands The navigation system also can recognise the words in the following list. Other voice commands for navigation operation Preferential voice command Other voice command Back Return, Before Cancel Escape, Skip Current Location My Location...
Page 158 MAN-HD3-SOFTW-EN.book Page 156 Wednesday, January 10, 2007 9:33 AM Preferential voice command Other voice command 5 miles Scale 5miles 10 miles Scale 10miles 25 miles Scale 25miles 50 miles Scale 50miles 100 miles Scale 100miles 250 miles Scale 250miles 25 yards Scale 25yards 50 yards Scale 50yards...
Page 159: Other Voice Commands For Av Operation
MAN-HD3-SOFTW-EN.book Page 157 Wednesday, January 10, 2007 9:33 AM Preferential voice command Other voice command Other Operation Other, Others Erase Tracks Delete Tracks, Remove Tracks Display Overlay POI Show Overlay POI, Display POIs Set As Destination Set, Go, Route To Destination, Begin Guidance, Start Set As Waypoint Set Waypoint, Waypoint Set As Destination...
Page 160: Category List For Vicinity Search
MAN-HD3-SOFTW-EN.book Page 158 Wednesday, January 10, 2007 9:33 AM Category list for vicinity search If you say the category name (category title), the system searches for vicinity POIs in that category without taking the chain into consideration. Category name: Restau- Category name: Hotel GALP rants...
Page 161 MAN-HD3-SOFTW-EN.book Page 159 Wednesday, January 10, 2007 9:33 AM PARADORES Computers and Software BRED BANQUE POPULAIRE PARK INN CDs, DVDs and Videos CESKA SPORITELNA PARKHOTEL Cameras and Photography POUSADAS Book Shops CLIENTIS PREMIER LODGE Do-It-Yourself COOP PRÈMIERE CLASSE Kitchens and Bathrooms CREDIT LYONNAIS PRIDE OF BRITAIN HOTELS Furniture...
Page 162 MAN-HD3-SOFTW-EN.book Page 160 Wednesday, January 10, 2007 9:33 AM Tennis Court Government Office MERCEDES-BENZ Ice Skating Rink City Centre MERCEDES-BENZ TRUCKS Swimming Pool MERCURY Category name: Trans- Water Sports port Horse-Riding MINI Airport Billiards, Snooker, Pool MITSUBISHI Train Station Bowling MITSUBISHI TRUCKS Ferry Terminal NISSAN...
Page 163 MAN-HD3-SOFTW-EN.book Page 161 Wednesday, January 10, 2007 9:33 AM MAZDA, Repair NATIONAL-ATESA MERCEDES-BENZ, Repair OKQ8, Rental MIDAS, Repair PREEM, Rental MITSUBISHI, Repair RENT A CAR NISSAN, Repair SCANDIA RENT NORAUTO, Repair SHELL, Rental ÖAMTC, Repair SIXT OPEL, Repair STATOIL, Rental PEUGEOT, Repair THRIFTY RENAULT, Repair...
Page 164 MAN-HD3-SOFTW-EN.book Page 162 Wednesday, January 10, 2007 9:33 AM...
Page 165: Appendix
MAN-HD3-SOFTW-EN.book Page 163 Wednesday, January 10, 2007 9:33 AM Appendix Returning the Navigation Sys- Method 3: [Reset] on start-up Clears the setting values stored in the hard disk tem to the Default or Factory drive. Settings You can return settings or recorded contents to the default or factory settings.
Page 166: Setting Items To Be Deleted
MAN-HD3-SOFTW-EN.book Page 164 Wednesday, January 10, 2007 9:33 AM Setting items to be deleted The items to be deleted vary depending on the reset method. The items listed in the following table return to the default or factory settings. The items not listed below will be retained. However, if you carry out [Clear user information from hard disk], all the settings related to the navigation function including the items not listed below are deleted.
Page 167: If System Errors Frequently Occur
MAN-HD3-SOFTW-EN.book Page 165 Wednesday, January 10, 2007 9:33 AM Method 1 Method 2 Method 3 Method 4 Audio functions Music Library Repeat, Random settings – [LIBRARY] Track data – – – Playlist – – – Last playback position – – –...
Page 168: Adjusting The Response Positions Of The Touch Panels (Touch Panel Calibration)
MAN-HD3-SOFTW-EN.book Page 166 Wednesday, January 10, 2007 9:33 AM Adjusting the Response Posi- Press the MENU button and then touch tions of the Touch Panels [Settings]. The setting menu appears. (Touch Panel Calibration) Touch [Hardware] and then touch [3D If you feel that the touch keys on the screen devi- Calibration Status].
Page 169: Positioning Technology
MAN-HD3-SOFTW-EN.book Page 167 Wednesday, January 10, 2007 9:33 AM Positioning Technology Press the V button. The adjusted position data is saved. Do not turn off the engine while saving the The navigation system accurately measures your adjusted position data. current location by combining the positioning by Press the MAP button to complete the 4- GPS and by Dead Reckoning.
Page 170: How Do Gps And Dead Reckoning Work Together
MAN-HD3-SOFTW-EN.book Page 168 Wednesday, January 10, 2007 9:33 AM The method of positioning changes as follows If you use chains on your wheels for winter depending on whether the speed pulse of your driving or put on the spare wheel, errors may vehicle is detected or not: suddenly increase because of difference in wheel diameter.
Page 171: Handling Large Errors
MAN-HD3-SOFTW-EN.book Page 169 Wednesday, January 10, 2007 9:33 AM Handling Large Errors • If a car phone or mobile phone is used near the GPS aerial, GPS reception may be lost tempo- rarily. Positioning errors are kept to a minimum by com- •...
Page 172 MAN-HD3-SOFTW-EN.book Page 170 Wednesday, January 10, 2007 9:33 AM • If there is a parallel road. • If there is a loop or similar road configuration. • If you take a ferry. • If there is another road very nearby, such as in the case of an elevated motorway.
Page 173 MAN-HD3-SOFTW-EN.book Page 171 Wednesday, January 10, 2007 9:33 AM • If your vehicle is turned on a turntable or simi- • If you join the road after driving around a large lar structure. car park. • When you go round a roundabout. •...
Page 174: Troubleshooting
While this list is not comprehensive, it should answer your most common problems. If a solution to your problem cannot be found here, con- tact your dealer or the nearest authorised Pioneer service facility. Problems in the screen...
Page 175 MAN-HD3-SOFTW-EN.book Page 173 Wednesday, January 10, 2007 9:33 AM Symptom Cause Action (See) Signals from the vehicle’s speed Check that the cables are properly pulse are not being picked up prop- connected. If necessary, consult the erly. dealer that installed the system. The navigation system may not be Check that the navigation system is mounted securely in your vehicle.
Page 176 The [AV Input] setting is incorrect. Please read the following page and set the setting correctly. Page 138 The audio skips. The navigation system is not firmly Secure the navigation system firmly. secured. Failure hard disk drive. Consult your Pioneer dealer.
Page 177 MAN-HD3-SOFTW-EN.book Page 175 Wednesday, January 10, 2007 9:33 AM Symptom Cause Action (See) “Rear display” picture disappears. The setting for [REAR SCREEN] is Please read the following page and incorrect. set the rear screen setting correctly. Page 141 There was a problem with the “Rear Check the “Rear display”...
Page 178: Messages And How To React To Them
When What to do Irregular speed pulse signal If the navigation system does not Consult your Pioneer dealer. detected. Please power off the sys- receive the vehicle speed pulse. tem and check the installation. Then, please re-boot the system and press “OK”.
Page 179 Route calculation was not possible. Route calculation has failed because • Change the destination. of a malfunction in map data, soft- • Consult the Pioneer Local dealer if ware, or hardware. this message persists. Route calculation not possible The destination is too far.
Page 180 Failed to make the route profile. In rare cases, a route calculation • Retry. error may occur. • Consult the Pioneer Local dealer if this message persists. There is no Traffic List. There is no available traffic informa- Move to the location where you can tion now.
Page 181 MAN-HD3-SOFTW-EN.book Page 179 Wednesday, January 10, 2007 9:33 AM Message When What to do Registration failed. The mobile phone’s Bluetooth wire- Keep turning the target phone’s less technology is turned off during Bluetooth wireless technology on the registration step. during the registration. Rejection by the mobile phone has Operate the target phone and accept received.
Page 182: Messages For Audio Functions
When problems occur in the audio source, a message may appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest PIONEER Service Centre. Built-in DVD drive...
Page 183: Other Sources
MAN-HD3-SOFTW-EN.book Page 181 Wednesday, January 10, 2007 9:33 AM Message When What to do This track cannot be added The music library component is abnor- Consult your dealer. to MyMix mal. Name cannot be used for Some invalid characters have been Enter different characters so that the sys- voice recognition.
Page 184: When The Hard Disk Drive Is Disconnected
MAN-HD3-SOFTW-EN.book Page 182 Wednesday, January 10, 2007 9:33 AM When the Hard Disk Drive is Dis- Route Setting Information connected Route search specifications If there is no hard disk drive because of repair or Your navigation system sets a route to your desti- service, you can operate only the Radio source nation by applying certain built-in rules to the without the hard disk drive.
Page 185: Route Highlighting
MAN-HD3-SOFTW-EN.book Page 183 Wednesday, January 10, 2007 9:33 AM Roads not used in calculations • In some cases, the route may require you to travel in the opposite direction to your current Even though displayed on screen, the following heading. In such cases, you are instructed to roads are not included in route calculations.
Page 186: About Playing Dual Disc
ROM discs or DVD-RAM discs. Only DVD-ROM • If you insert a CD-RW disc into this product, it discs authorised by Pioneer can be read. will take more time to play back than when you • Playback of discs recorded on a personal com- insert a conventional CD or CD-R disc.
Page 187 MAN-HD3-SOFTW-EN.book Page 185 Wednesday, January 10, 2007 9:33 AM ing software that permit the setting of the play- back order. • Some audio CDs contain tracks that merge into one another without a pause. When these discs are converted to MP3 files and burned to a CD-R/CD-RW/CD-ROM, the files will be played back on this player with a short pause between each one, regardless of the length of...
Page 188: Glossary
MAN-HD3-SOFTW-EN.book Page 186 Wednesday, January 10, 2007 9:33 AM Glossary This stands for Digital Theatre Systems. DTS is a sur- round system delivering multi-channel audio from up to This glossary explains some of the terms used in 6 independent channels. the manual.
Page 189: Route Setting
MAN-HD3-SOFTW-EN.book Page 187 Wednesday, January 10, 2007 9:33 AM byte numerals and the “_” sign, with a file-extension of Multi-subtitle three characters). Subtitles in up to 32 languages can be recorded on a sin- gle DVD, letting you choose as desired. Level 2: The file name can have up to 31 characters (including Optical digital output...
Page 190: Voice Guidance
MAN-HD3-SOFTW-EN.book Page 188 Wednesday, January 10, 2007 9:33 AM TV system (NTSC, PAL, SECAM) Different areas of the world use different TV systems. North America uses NTSC, Europe uses PAL and SECAM, and South America uses PAL-M, PAL-N, PAL and NTSC. Almost all are incompatible with each other.
Page 191: Display Information
MAN-HD3-SOFTW-EN.book Page 189 Wednesday, January 10, 2007 9:33 AM Display Information Navigation menu [Destination] menu P.24 P.53, 57 P.53, 57 P.49 P.30 P.54, 57 P.54, 63 P.53 P.51 P.29 [Info/Phone] menu P.66 P.65 P.68 P.68 P.74 P.75, 77 P.77 P.75, 79 P.78 P.75, 79 P.72...
Page 192 MAN-HD3-SOFTW-EN.book Page 190 Wednesday, January 10, 2007 9:33 AM [Map] menu P.45 P.46 P.46 P.47 P.47 P.47 P.47 P.43 P.43 P.43 P.44 P.44 P.44 P.44 P.44 P.44 P.45...
Page 193 MAN-HD3-SOFTW-EN.book Page 191 Wednesday, January 10, 2007 9:33 AM [Settings] menu P.81 P.82 P.82 P.83 P.83 P.83 P.84 P.85 P.85 P.85 P.81 P.57 P.86 P.88 P.88 P.88...
Page 194: Shortcut Menu
MAN-HD3-SOFTW-EN.book Page 192 Wednesday, January 10, 2007 9:33 AM Shortcut menu The shortcuts displayed on screen can be customised. Items marked with an asterisk (*) can not be removed from the shortcut menu. Changing a shortcut Page 45 Shortcut menu : Destination* P.
Page 195: Menu In The Audio Screen
MAN-HD3-SOFTW-EN.book Page 193 Wednesday, January 10, 2007 9:33 AM Menu in the Audio Screen [Audio Settings] menu P.131 P.133 P.133 P.134 P.134 P.134 P.135 [System Settings] menu (Page 1) P.136 P.137 P.138 P.138 P.139 P.139 P.139 P.140 P.140 [System Settings] menu (Page 2) P.140 P.140 P.140...
Page 196: Index
MAN-HD3-SOFTW-EN.book Page 194 Wednesday, January 10, 2007 9:33 AM Index Backlight 143 best stations memory 101, 107 Bit rate 94, 186 Numerics Bluetooth Connected icon 39 10key mode 99 Bluetooth unit 39, 71 10Key Search 98, 99, 180 BSM 101, 107 2D Twin Map View 36 BSSM 126 3D detection 84...
Page 197 MAN-HD3-SOFTW-EN.book Page 195 Wednesday, January 10, 2007 9:33 AM equaliser curves 132 Errors 169 keyboard 25, 82 Estimated time of arrival 29, 38, 83 EXT 127 Language 81, 136, 149 External Unit 127 Learning Route 31 Learning Status 84 fader/balance 133 Linear PCM 187 Favourite Location 53, 57, 59, 86, 186 Location confirmation screen 27...
Page 198 MAN-HD3-SOFTW-EN.book Page 196 Wednesday, January 10, 2007 9:33 AM Options 30 ROOT 95, 96 Route Calculation Condition 28, 30 Route Condition 30 Packet write 187 Route confirmation screen 28 PAL 141, 188 route guidance 29 Parental lock 137, 187 Phone Book 75, 77, 78, 80 phone call 74 Scroll cursor 40, 52 Phone Connection Status 83...
Page 199 MAN-HD3-SOFTW-EN.book Page 197 Wednesday, January 10, 2007 9:33 AM traffic announcement 99, 102 Traffic event icon 66 Traffic Information 65 traffic jam 65 traffic list 65 Traffic On Route 66 travel time 38 Travel time to destination 28 Troubleshooting 172 tuning step 141 TV 125 TV signal 141...
Page 200 MAN-HD3-SOFTW-EN.book Page 198 Wednesday, January 10, 2007 9:33 AM...
Page 201 MAN-HD3-SOFTW-EN.book Page 1 Wednesday, January 10, 2007 9:33 AM...
Page 202 TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. Blvd. Manuel Avila Camacho 138 10 piso Col. Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270 Published by Pioneer Corporation.

Pioneer AVIC-HD3 Operation Manual

Table of Contents

Chapter 1

Chapter 2

Chapter 4

Chapter 5

Chapter 6

Chapter 7

Chapter 9

Chapter 10

Chapter 11

6 Touch .

Chapter 12

Chapter 13

Chapter 14

Appendix

Quick Links

Chapters

Related Manuals for Pioneer AVIC-HD3

Summary of Contents for Pioneer AVIC-HD3