Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
■ Changing the stitch width
Adjust the stitch width.
–
• For details, refer to "Adjusting the stitch
width" (page 59).
Memo
Before sewing buttonholes, check the stitch
length and width by sewing a trial
buttonhole on a scrap piece of fabric.
■ Sewing buttonholes on stretch fabrics
When sewing buttonholes on stretch fabrics, use
a gimp thread.
Hook the gimp thread onto the part of
a
buttonhole foot "A" shown in the illustration
so that it fits into the grooves, and then loosely
tie it.
88
+
Attach buttonhole foot "A".
b
• For details, refer to "Replacing the presser
foot" (page 41).
52
Select stitch
or
c
d
Adjust the stitch width to the thickness of the
gimp thread.
e
Lower the presser foot lever and the
buttonhole lever, and then start sewing.
When sewing is finished, gently pull the gimp
f
thread to remove any slack.
g
Use a handsewing needle to pull the gimp
thread to the wrong side of the fabric, and
then tie it.
h
With a seam ripper, cut the middle part of the
gimp thread remaining at the top end of the
buttonhole.
Trim off any excess of the gimp thread.
53
.
Advertisement
Table of Contents
