Table of Contents
Advertisement
Configuring the Wireless Network
Configuring WPS
Configuring WPS
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
Cisco RV110W Administration Guide
You can configure WPS on the Cisco RV110W to allow WPS-enabled devices to
more easily connect to the wireless network.
To configure WPS on client devices:
Choose Wireless > WPS. The Wi-Fi Protected Setup page appears
From the SSID drop-down menu, choose the wireless network on which to enable
WPS.
In the WPS field, check Enable to enable WPS. To disable WPS, uncheck the box.
Configure the WPS on client devices in one of the following three ways:
•
WPS Method 1
•
WPS Method 2
•
WPS Method 3
After you configure WPS, the following information appears at the bottom of the
WPS page: Wi-Fi Protected Setup Status, Network Name (SSID), Security,
Encryption, and Passphrase.
WPS Method 1
Use this method if your client device has a WPS button.
Click or press the WPS button on the client device.
On the WPS page, click the WPS button. When WPS configuration is completed, a
dialog box appears.
Click OK.
Refer to your client device or its documentation for additional instructions on
setting up your client device.
3
77
Hide quick links:
Advertisement
Table of Contents
