Transporting And Storing Outboard Motor - Yamaha F50 Owner's Manual
Hide thumbs
Also See for F50:
- Owner's manual (116 pages) ,
- Rigging manual (497 pages) ,
- Maintenance manual (36 pages)
Table of Contents
Advertisement
T50TR 2.33 (28/12)
T60TR 2.33 (28/12)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F50TR G
F60TR G
T50TR K
T60TR K
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Min. pump octane:
86
Fuel tank capacity:
24 L (6.34 US gal) (5.28 Imp.gal)
Recommended engine oil:
4-stroke outboard motor oil
Engine oil grade API:
API SE, SF, SG, SH, SJ, SL
Engine oil type SAE:
SAE10W30 or SAE10W40
Lubrication:
Wet sump
Engine oil quantity (excluding oil filter):
2.5 L (2.64 US qt) (2.20 Imp.qt)
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
F50TR 430.0 cm
(15.17 Imp.oz)
F60TR 430.0 cm
(15.17 Imp.oz)
T50TR 670.0 cm
(23.63 Imp.oz)
T60TR 670.0 cm
(23.63 Imp.oz)
Tightening torque for engine:
Spark plug:
18.0 Nm (13.3 ft-lb) (1.84 kgf-m)
Propeller nut:
3
(14.54 US oz)
3
(14.54 US oz)
3
(22.65 US oz)
3
(22.65 US oz)
35.0 Nm (25.8 ft-lb) (3.57 kgf-m)
Engine oil drain bolt:
18.0 Nm (13.3 ft-lb) (1.84 kgf-m)
Engine oil filter:
18.0 Nm (13.3 ft-lb) (1.84 kgf-m)
EMU28222
Transporting and storing
outboard motor
EWM00690
WARNING
Leaking fuel is a fire hazard. When
G
transporting and storing the outboard
motor, close the air vent screw and fuel
cock to prevent fuel from leaking.
USE CARE when transporting fuel tank,
G
whether in a boat or car.
DO NOT fill fuel container to maximum
G
capacity. Gasoline will expand consid-
erably as it warms up and can build up
pressure in the fuel container. This can
cause fuel leakage and a potential fire
hazard.
EWM00700
WARNING
Never get under the lower unit while it is
tilted, even if a motor support bar is used.
Severe injury could occur if the outboard
motor accidentally falls.
ECM00660
CAUTION:
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
The outboard motor should be trailered and
stored in the normal running position. If there
is insufficient road clearance in this position,
Maintenance
53
- Quick Links:
- Changing Engine Oil
Hide quick links:
Advertisement
Table of Contents
