Trolling; Adjusting Trolling Speed; Stopping Engine; Procedure - Yamaha F50 Owner's Manual
Hide thumbs
Also See for F50:
- Owner's manual (116 pages) ,
- Rigging manual (497 pages) ,
- Maintenance manual (36 pages)
Table of Contents
Advertisement
Operation
EMU30880
Trolling
EMU30890
Adjusting trolling speed
The trolling speed on outboard motors
equipped with the variable trolling RPM
switches can be adjusted approximately 50
r/min with each press of a switch.
1. "
" switch
2. "
" switch
To increase the trolling speed, press the "
switch.
To decrease the trolling speed, press the
"
" switch.
NOTE:
The trolling speed changes approximately
G
50 r/min each time a switch is pressed.
If the trolling speed has been adjusted, the
G
engine returns to the normal trolling speed
when the engine is stopped and restarted
44
or when the engine speed exceeds ap-
proximately 3000 r/min.
EMU27820
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU27844
Procedure
1.
Push and hold the engine stop button or
turn the main switch to "
"
2.
After stopping the engine, disconnect
the fuel line if there is a fuel joint on the
outboard motor.
" (off).
- Quick Links:
- Changing Engine Oil
Hide quick links:
Advertisement
Table of Contents
