Trip Meter; Clock - Yamaha F50 Owner's Manual
Hide thumbs
Also See for F50:
- Owner's manual (116 pages) ,
- Rigging manual (497 pages) ,
- Maintenance manual (36 pages)
Table of Contents
Advertisement
engine has been run. It can be set to show
the total number of hours or the number of
hours for the current trip. The display can
also be turned on and off.
Changing the display format
G
Pressing the "
G
es the display format in the following pat-
tern:
Total hours→Trip hours→Display off
G
Resetting the trip hours
G
Simultaneously pressing the "
G
and "
" (mode) buttons for more than
1 second while the trip hours are displayed
resets the trip counter to 0 (zero).
NOTE:
The total number of hours the engine has
been run cannot be reset.
EMU26690
Trip meter
This gauge displays the distance the boat
has traveled since the gauge was last reset.
Press the "
" (mode) button repeatedly
until the indicator on the face of the gauge
points to "
" (trip). To reset the trip meter
to zero, press the "
(mode) buttons at the same time.
ZMU01741
" (mode) button chang-
" (set)
" (set) and "
Basic components
NOTE:
The trip distance is shown in kilometers or
G
miles depending upon the unit of measure-
ment selected for the speedometer.
The trip distance is kept in memory by bat-
G
tery power. The stored data will be lost if
the battery is disconnected.
EMU26700
Clock
Press the "
until the indicator on the face of the gauge
points to "
sure the gauge is in the "
Press the "
" (set) button; the hour display
will begin blinking. Press the "
button until the desired hour is displayed.
Press the "
" (set) button again, the minute
display will begin blinking. Press the "
(mode) button until the desired minute is dis-
played. Press the "
start the clock.
"
" (mode) button repeatedly
" (time). To set the clock, be
" (time) mode.
" (set) button again to
" (mode)
"
25
- Quick Links:
- Changing Engine Oil
Hide quick links:
Advertisement
Table of Contents
