Cisco Rv215W Features; Placement Tips; Front Panel - Cisco Small Business RV215W Quick Start Manual

Wireless-n vpn firewall

Hide thumbs Also See for Small Business RV215W:

Table of Contents

Welcome

Thank you for choosing the Cisco Small Business RV215W Wireless-N

VPN Firewall.

This guide describes how to physically install your Cisco RV215W and

launch the web-based Device Manager.

Installing the Cisco RV215W

To prevent the firewall from overheating or being damaged:

• Ambient Temperature—Do not operate it in an area that exceeds an

ambient temperature of 104°F (40°C).

• Air Flow—Be sure that there is adequate air flow around the firewall.

• Mechanical Loading—Be sure that the firewall is level and stable to

avoid any hazardous conditions.

Place the device on a flat surface so that it sits on its four rubber feet.

Cisco RV215W Features

Power

USB

WAN

Solid green to indicate the unit is powered on and

booted. Flashes green when the device is

booting or loading the firmware.

Lit green when the corresponding port is

connected to a device. Flashes green when the

port is sending or receiving data.

Solid green when the firewall is connected to the

Internet by using a wired connection. The light is

off when it is not connected to the Internet or it is

connected by using a USB dongle. The light

flashes when it is sending or receiving data over

the wired connection.

Cisco RV215W Wireless-N VPN Firewall

Table of Contents