Advertisement
Advertisement
Table of Contents
Related Manuals for Acer ALN-201 Series
Summary of Contents for Acer ALN-201 Series
- Page 1 ALN-201 Series PCI Ethernet Adapter Card User Guide P/N 49.80316.001...
-
Page 2: Package Contents
Federal Communications Commission Frequency Interference Statement This equipment generates, uses and radiate radio frequency energy. If not installed and used in accordance with the instructions in this manual, may cause interference to radio communications. This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to Part 15 of the FCC rules, which are designed to provide reasonable protection against radio interference when operated in a... - Page 3 There is one LED on the bracket to indicate the link status. LED color : Green LED “ON” : the 10Base-T link connection is successful. LED “OFF” : the 10Base-T link is NOT successful Remote boot ROM socket: their is a ROM socket on this adapter card to support remote boot ROM.
-
Page 4: Connecting Network Cables
3. Connecting Network Cables Connecting a Twisted-Pair Cable Insert one end of the twisted-pair cable into the RJ-45 connector on this adapter card. Orient the cable terminal jack correctly and push it into the connector until you hear a click. Note: The other end of the twisted-pair cable has to be connected to an Ethernet hub or switch Connecting a 10Base-2 Thin Ethernet Coaxial Cable... -
Page 5: Network Drivers
The program file “ACERSET.EXE” in driver diskette can be run to do the above configurations & the diagnostics of this adapter card. 5. Network Drivers The driver diskette contains all the software driver programs supported by the adapter. The drivers for different network operating systems are found in separate sub-directories. -
Page 6: Specifications
6. Specifications Item Specification System Interface PCI local bus Automatically configured by the I/O address system Interrupt channel BIOS setting Boot ROM address BIOS setting Boot ROM size 16Kbyte Buffer size 16Kbyte packet buffer Power requirement 5W at +5V Transmission protocol IEEE 802.3 CSMA/CD protocol Data rate 10 Mbits/sec...