Epson
DC-12 Document Camera (ELPDC12)
®
Quick Start
Follow these instructions to display pages from books and documents, and
three-dimensional objects. To use other features, see the online User's Guide.
It provides instructions for using the microscope adapter, capturing still
images, and using the included software.
Before using the product, make sure you read the safety instructions in the
online User's Guide.
Setting up the product
1
Raise the camera arm.
2
Connect your projector. Use a VGA cable (included), a composite video
cable (not included), or an HDMI cable (not included).
Composite video cable
3
Connect the power adapter.
4
Press the
power button to turn on the document camera.
5
Turn on your projector. Then select the source (port) on the projector
that lets you display the camera image. On the document camera, press
the
Source button, if necessary.
*412492700*
*412492700*
VGA cable
HDMI cable
Using the product
1
Place your document on the table under the camera head. Align the
center of your document with the
camera.
2
Slide the lamp switch to illuminate the document.
Lamp switch
3
Turn the rotation dial on the camera head to rotate the image.
Rotation dial
4
Press the Focus button on the document camera or the Auto Focus
button on the remote control. Your document is automatically focused.
5
To zoom in or out on part of the image, press the Zoom
Note:
You can also use the remote control to adjust the image.
6
To record audio with your video lessons, use the built-in microphone.
Microphone
When you're done using the product, turn it off and lower the camera arm as
shown.
mark on the side of the document
mark on the side of the document
or
button.