hit counter script
Dell Latitude D600 Service Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Laptop
  5. Lattitude D600
  6. Service manual
Dell Latitude D600 Service Manual

Dell Latitude D600 Service Manual

Hide thumbs Also See for Latitude D600:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, User Manual
Dell™ Latitude™ D600 Service Manual
Before You Begin
System Components
Memory Module, Mini PCI Card, and Modules
Reserve Battery
Hard Drive
Keyboard
Display Assembly and Display Latch
Palm Rest
Docking Doors
Fan
Bluetooth™ Card
Microprocessor Thermal-Cooling Assembly
Microprocessor Module
Flashing the BIOS
Speakers
Base Latch
Modem
System Board
Pin Assignments for I/O Connectors
Mini Recommended Spares List
 Notes, Notices, and Cautions
NOTE:
A NOTE indicates important information that helps you make better use of your computer.
NOTICE:
A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION:
A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2003 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Inc.; Intel is a registered trademark of Intel Corporation; Bluetooth is a trademark owned by
Bluetooth SIG, Inc. and is used by Dell Inc. under license.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model PP05L
September 2009 Rev. A03

Advertisement

Table of Contents
loading

Related Manuals for Dell Latitude D600

Summary of Contents for Dell Latitude D600

  • Page 1 Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Inc.; Intel is a registered trademark of Intel Corporation; Bluetooth is a trademark owned by Bluetooth SIG, Inc. and is used by Dell Inc. under license.

  • Page 2: Before You Begin

    Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

  • Page 3: Recommended Tools

    11.  Remove any installed memory modules, Mini PCI cards, and modules, including a second battery if one is installed. 12.  Remove the hard drive.   Recommended Tools   The procedures in this manual require the following tools:  #1 Phillips screwdriver  ¼-inch flat-blade screwdriver  Small plastic scribe  Flash BIOS update program floppy disk or CD...
  • Page 4      Optional Module:  Hard Drive:  Keyboard:  (1 each)  (1 each)  (2 each)        Display Assembly:  Display Bezel:  Display Panel:  (3 each)  (6 each)  (4 each)              Display Latch:  Palm Rest:  Fan:  (2 each)  (3 each)  (2 each)  ...
  • Page 5  Speakers:  Modem:  System Board:  (1 each)  (1 each)  (1 each)          (1 each)  (1 each)      (4 each)     Back to Contents Page  ...

  • Page 6: Flashing The Bios

    Back to Contents Page   Flashing the BIOS Dell™ Latitude™ D600 Service Manual 1.  Ensure that the AC adapter is plugged in and that the main battery is installed properly.   NOTE: If you use a BIOS update program CD to flash the BIOS, set up the computer to boot from a CD before inserting the CD.

  • Page 7: Bluetooth™ Card

    Back to Contents Page   Bluetooth™ Card  Dell™ Latitude™ D600 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

  • Page 8: Removing The Microprocessor Module

    Back to Contents Page   Microprocessor Module Dell™ Latitude™ D600 Service Manual   Removing the Microprocessor Module   CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

  • Page 9: Installing The Microprocessor Module

    NOTE: See Mini RSL for microprocessor part numbers. 5.  Lift out the microprocessor module.   Installing the Microprocessor Module   NOTICE: Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly in the ZIF socket does not require force.

  • Page 10: Display Assembly And Display Latch

    Back to Contents Page   Display Assembly and Display Latch Dell™ Latitude™ D600 Service Manual   Display Assembly   Display Bezel   Display Panel   Display Latch   Display Assembly   CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 11     1  display 2  cable-routing clips (4) 3  display cable connector 5.  Pull up on the pull-tab that is attached to the display cable connector to remove the connector from the system board. 6.  Remove the three M2.5 x 6-mm screws. 7.

  • Page 12: Display Bezel

    5.  Remove the six M2 x 5-mm screws located on the front of the bezel.   NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel. 6.  Starting at the bottom of the display panel (by the Dell™ logo), use your fingers to separate the bezel from the top cover by lifting the inside edge of  the bezel away from the top cover.   Display Panel...
  • Page 13 CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. 1.  Follow the instructions in "Preparing to Work Inside the Computer."...

  • Page 14: Display Latch

    and pull-tab) 2  top display-cable connector 3  pull-tab on bottom flex-cable connector 9.  Press in both sides of the top display cable connector, and pull the display cable connector away from the top flex-cable connector.   Display Latch   NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
  • Page 15 Back to Contents Page   Docking Doors Dell™ Latitude™ D600 Service Manual   Removing the Docking Doors   CAUTION: Before working inside your computer, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 16  docking doors with spring  7R316  longer post      Back to Contents Page  ...
  • Page 17 Back to Contents Page   Dell™ Latitude™ D600 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

  • Page 18: Hard Drive

    Hard drives are extremely fragile; even a slight bump can damage the drive.   NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell. 1.  Follow the instructions in "Preparing to Work Inside the Computer."...
  • Page 19 5.  Remove the bezel screw and the bezel from the hard drive. 6.  Remove the new drive from its packaging.   Save the original packaging to use when storing or shipping the hard drive.   7.  Attach the bezel to the new hard drive with the bezel screw.  ...
  • Page 20 Back to Contents Page   Keyboard Dell™ Latitude™ D600 Service Manual     CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 21    center control cover  8M659 4.  Remove the keyboard: a.  Remove the two M2.5 x 6-mm screws across the top of the keyboard.   NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard.

  • Page 22: Base Latch

    Back to Contents Page   Base Latch Dell™ Latitude™ D600 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 23 Back to Contents Page   Mini Recommended Spares List Dell™ Latitude™ D600 Service Manual NOTE: The part numbers listed below are subject to change.   Bottom Base Parts  N0441  memory door  7R843  Mini PCI card door  N0312  rubber foot for HDD strike zone (1)  2N401...
  • Page 24  8M669  top cover, 14.1 inch (includes latch and hinges)   Memory  3Y180  128 MB DIMM  3Y182  256 MB DIMM  0K963  512 MB DIMM  7N020  1 G DIMM Modem Y0231 Modem Daughter Card   Power Source  1M590  primary battery 12.6 V, 6 cell  7P806  D-MOD second battery, 12.6 V, 6 cell   ...
  • Page 25 Back to Contents Page   Modem Dell™ Latitude™ D600 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 26    modem  modem cable Back to Contents Page  ...

  • Page 27: Palm Rest

    Back to Contents Page   Palm Rest Dell™ Latitude™ D600 Service Manual     CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 28   1  back center of the palm rest 2  touch pad connector 3  system board connector 4  computer base   6.  Turn the computer over and remove the nine M2.5 x 8-mm screws.      M2.5 x 8-mm screws (9)  3R690  ...

  • Page 29: Pin Assignments For I/O Connectors

    Back to Contents Page   Pin Assignments for I/O Connectors Dell™ Latitude™ D600 Service Manual   USB Connector   Video Connector   Parallel Connector   USB Connector     Signal  USB5V+  USBP–  USBP+  GND   Video Connector     Signal Signal  CRT_R  5V+  CRT_G  GND  CRT_B  MONITOR_DETECT–...
  • Page 30     Signal Signal  STROBE–  ACK–  PD0  BUSY  PD1  PE  PD2  SLCT  PD3  AFD/3M–  PD4  ERROR–  PD5  INIT–  PD6  SLIN–  PD7 18-25  GND   Back to Contents Page  ...

  • Page 31: Reserve Battery

    Reserve Battery Dell™ Latitude™ D600 Service Manual   CAUTION: Before working inside your Dell™ computer, read the safety instructions in your System Information Guide.   CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.
  • Page 32 Back to Contents Page  ...
  • Page 33 Back to Contents Page   Speakers Dell™ Latitude™ D600 Service Manual   CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

  • Page 34: Removing The System Board

    Back to Contents Page   System Board Dell™ Latitude™ D600 Service Manual   Removing the System Board   CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

  • Page 35: Installing The System Board

       M2 x 3-mm screws (4)  4270E 9.  Remove the four M2 x 3-mm screws labeled "circle B" that secure the system board to the computer base. 10.  Pull out the system board starting from the front of the palm rest.  ...

  • Page 36: System Components

    Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

  • Page 37: Removing The Microprocessor Thermal-Cooling Assembly

    Back to Contents Page   Microprocessor Thermal-Cooling Assembly Dell™ Latitude™ D600 Service Manual   Removing the Microprocessor Thermal-Cooling Assembly   CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.   NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
  • Page 38 © 2003 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Inc.; Bluetooth is a trademark owned by Bluetooth SIG, Inc. and is used by Dell Inc. under license. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

  • Page 39: Memory Module

    To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.   NOTE: Memory modules purchased from Dell are covered under your computer warranty. 1.  Follow the instructions in "Preparing to Work Inside the Computer."...

  • Page 40: Mini Pci Card

      Mini PCI Card   If you ordered a Mini PCI card at the same time that you ordered your computer, Dell has already installed the card for you.   CAUTION: Before working inside your computer, read the safety instructions in your System Information Guide.
  • Page 41 3.  Place your finger under the cover at the indentation, and lift and slide the cover open.   4.  If a Mini PCI card is not already installed, go to step 5. If you are replacing a Mini PCI card, remove the existing card: a.
  • Page 42 8.  Continue lowering the Mini PCI card until it snaps into the inner tabs of the connector. 9.  Replace the cover.   Modules   Your computer ships with an optical drive installed in the module bay. However, the device security screw is not installed in the optical drive but packaged separately.
  • Page 43   NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them. 2.  Close the display and turn the computer over. 3.

Table of Contents