Table of Contents
Advertisement
Setup Basic Settings - Enable/Disable Time Synchronization by
Network Time Protocol Page Description
The following table provides a description of the fields within the Basic Settings
Enable/Disable time synchronization by Network Time protocol page.
Field Name
Current System Time
Network Time Protocol
Latest Update Success
Time Zone
Daylight Saving Time
Time Server
Function Keys
Key
Apply
Add Server
Remove Server
4024320 Rev A
How Do I Configure My DOCSIS Residential Gateway?
Description
Displays the current system time and date
Allows you to enable or disable network time
protocol
Note: The residential gateway will automatically
use the time server in your broadband network.
Should there be no current time displayed or if the
network time is incorrect, enable Network Time
Protocol to use a public Internet time server to set
the clock in the gateway.
Displays the time and date of the last successful
time update
Displays the current time zone. The drop-down list
allows you to select your local time zone.
Allows you to adjust the time during periods when
Daylight Saving Time is in effect. Check the Enable
box to enable or disable this setting.
Note: If the offset for Daylight Savings Time is
other than 60 minutes, enter the offset in the
minutes field.
Add and delete time server URLs or IP addresses to
and from the list, as required. When using Network
Time Protocol, multiple time servers can be
specified for the gateway to query for time of day.
The gateway will sequentially step through the
listed time servers until it acquires the current time.
There are three well known public time servers
entered as default servers.
Description
Saves all additions, edits, and changes
Allows you to add a network time server
Allows you to remove a network time server
33
Hide quick links:
Advertisement
Table of Contents
