Sony BRCH900 Specification Sheet
Specification sheet (ccfc-s200 & bru-sf10 specification)
Hide thumbs
Also See for BRCH900:
- Manual (271 pages) ,
- Operating instructions manual (271 pages) ,
- Product manual (29 pages)
Advertisement
Quick Links
BRU-SF10
1. Single mode fiber cable supported
The BRU-SF10 supports single mode optical fiber cable ensuring 2,000m transmission at maximum.
2. Status display on the front panel
The following various status displays are newly added on the front panel of the BRU-SF10 to increase its usability.
- 1080i/720p, 59.94/50, RS-232C/422, 9600/38400bps
- Camera ID : 1~7
3. Monitor output
By inserting the BRBK-HSD2, the HD/SD-SDI output card into optional card slot, the BRU-SF10 enables monitor
output. By terming off data mix, it enables various camera settings without displaying OSD on video out signal (main
line).
4. Uncompressed digital transmission
The BRU-SF10 features uncompressed multiple signal operation via a single cable. Video, sync, pan/tilt control,
camera control signal and audio line-in signal can be transmitted using with the CCFC-S200, single mode optical fiber
cable and the BRBK-SF1, HD optical multiplex card. The distance between the BRU-SF10 and the BRC-Z330/-H900
can be extended to a maximum 2,000m (6,560 feet). The Single cable operation makes it possible to integrate the
camera system easily.
5. Variety of video signal output
The BRU-SF10 is equipped with analog RGB or Y/Pb/Pr signal output as standard. Furthermore, 2 built-in optional
- 1 -
As of May 8, 2012
Advertisement
Related Manuals for Sony BRCH900
Summary of Contents for Sony BRCH900
- Page 1 As of May 8, 2012 BRU-SF10 1. Single mode fiber cable supported The BRU-SF10 supports single mode optical fiber cable ensuring 2,000m transmission at maximum. 2. Status display on the front panel The following various status displays are newly added on the front panel of the BRU-SF10 to increase its usability. - 1080i/720p, 59.94/50, RS-232C/422, 9600/38400bps - Camera ID : 1~7 3.
- Page 2 card slots enable to provide various signals in order to broaden the range of applications. For instance, HD-SDI signal can be provided when installing the BRBK-HSD2 into the card slot. Two same kinds of cards can be installed into the BRU-SF10 at the same time.
- Page 3 BRBK-HSD2 HD/SD-SDI output card The BRBK-HSD2 provides HD-SDI signal when installed into the BRU-SF10 built-in card slot. By turning off data mix, it enables various camera settings without displaying OSD on video out signal (main line). This can be used as an optional card for the BRC-Z330*/-H900.
-
Page 4: System Configurations
System Configurations (When the BRBK-HSD2 x1 is inserted into the BRU-SF10) BRC-Z330/-H900 Note: The BRBK-HD2 for the BRC-Z330/-H900 can not be used with the BRU-SF10. Pin Assignment and Connection BRU-SF10 VISCA RS-232C IN pin assignment Pin No. Name Signals Data Transmission Ready (INPUT) Data Set Ready (INPUT) Transmit Data (INPUT) Ground... - Page 5 VISCA RS-422 pin assignment Pin No. Name Signals RXD OUT- Receive Data (OUT) - RXD OUT+ Receive Data (OUT) + TXD OUT- Transmit Data (OUT) - TXD OUT+ Transmit Data (OUT) + 1 2 3 4 5 6 7 8 9 Ground RXD IN- Receive Data (IN) -...
-
Page 6: Specifications
Specifications BRU-SF10 Brochure specifications Optical fiber LC Duplex Fiber Connector Video output D-Sub 15 pin: Component (Y/Pb/Pr) or RGB, HD, VD or SYNC External sync input External sync output Audio line output Phono jack x2 (L/R) Mini DIN 8 pin: RS-232C (VISCA IN), Mini DIN 8 pin: RS-232C (VISCA OUT), Camera control Connector plug 9 pin: RS-422 (VISCA IN/OUT) Optional card slots... - Page 7 Power consumption 3.7 W max. Operating temperature 0 °C to 40 °C (32 °F to 104 °F) Operating humidity 20% to 80% (no condensation) –20 °C to + 60 °C (–4 °F to +140 °F) Storage temperature Storage humidity 20% to 95% (no condensation) Dimensions 134 ×...
-
Page 8: Safety Approval
Mass Approx. 130 g (4.6 oz) Supplied accessories Operating instructions (1) CCFC-S200 Type LC duplex optical fiber cable Length 200m (656feet) Weight Approx. 3.6kg (7lb 15oz) Supplied accessories Extension adaptor (1) Safety approval BRU-SF10 UC UL+cUL: UL60950-1/CSA C22.2 No.60950-1 FCC/IC: Digital Device Class A Laser: DHHS/DNHW BRBK-SA1 WW North America... - Page 9 External appearance BRU-SF10 - 9 -...
-
Page 10: Rear Panel
Rear Panel VISCA RS-232C IN / OUT External Sync IN / OUT VIDEO OUT D-SUB 15P HD Optical Fiber IN VISCA RS-422 IN / OUT AUDIO OUT DIP SW (10BIT) DC 12 V Option I/F card slots - 10 -... - Page 11 BRBK-SA1 - 11 -...
- Page 12 BRBK-HSD2 - 12 -...
- Page 13 BRBK-SF1 - 13 -...
- Page 14 Comparison Chart1 Model name BRU-SF10 BRU-H700 BRU-300/P Appearance 2,000m Fiber cable Max. extension 1,000m (CCFC-M100HG) 500m (CCFC-M100) (CCFC-S200) Video output Analog RGB, Y/Pb/Pr Analog RGB, Y/Pb/Pr VBS, Y/C RS-232C / RS-422 Sync system INT/EXT 59.94i: AC 100 to 120V, 50/60Hz NTSC: AC 100 to 120V, 50/60Hz Power requirements DC 12 V...
- Page 15 CCFC-S200 Specification 1. General information This specification covers the descriptions of the optical fiber cable with connector. The following describes the structure and the characteristics of it. 2. Product Name Nonflammable SM type optical fiber cable with duplex LC connector plug on both sides 3.
- Page 16 6. Structure 6.1 Optical fiber cord Item Unit Construction Fiber type Single mode (SM) silica glass optical fiber Mode field diameter 9.2±0.7 Cladding diameter 125±1 Concentricity error Max. 0.8 Cladding noncircular ratio Max. 2 Interception wavelength 1.10~1.29 Fiber curl radius Min.
- Page 17 Fiber core Reinforcement Jacketing Not to scale Optical fiber cord Strength member Sheath Not to scale *Identification of optical fiber cord shall be made by sequential number printed on the jacketing (numbering). 6.3 Optical Connector Connector type Specification Structure Polishing Duplex LC connector plug IEC 61754-20 PNJHY-0048-61-04B...
- Page 18 7. Optical characteristics 7.1 Optical fiber core wire Item Wave length Characteristics Conversion Conversion formula Attenuation lambda=1.31um Less than 0.40dB/km 0.2=<L<1 Max. 0.25 x L+0.15 dB L<0.2 Max. 0.2 dB Zero 1.300~1.324um dispersion wavelength Zero Less than 0.093ps/nm dispersion slope L=Cable length (Km) 7.2 Optical connector Connector...
- Page 19 9. Flame retardant characteristics 9.1 Optical fiber cable Item Characteristics Flame retardant test Approved UL1581 VW-1 10. Package The cable is winded up in a coil and the connector part should be protected from damage while transportation - 19 -...
- Page 20 - 20 -...
- Page 21 - 21 -...
- Page 22 - 22 -...