Installation Instructions
for your new undercounter
TRASH MASHER* COMPACTOR
BEFORE YOU USE YOUR COMPACTOR
Be sure your compactor
is properly
installed
in an appropriate
level area
and a place suitable for the size, function and
protection of the compactor.
ELECTRICALREQUIREMENTS
Observe
All Governing
Codes and Ordinances
A 120-Volt, 60-Hz, AC only, 1 !%Ampere, fused electrical supply is required. (Time delay fuse or circuit breaker is
recommended.)
It is recommended
that a separate
circuit serving
only this appliance
be provided.
DO NOT use
an extension cord.
RECOMMENDED
GROUNDING
METHOD
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVE
THE
POWER
SUPPLY
CORD
GROUNDING
PRONG.
3-PRONG
GROUNDING TYPE
WALL RECEPTACLE
For your personal safety, this appliance
must be grounded.
This appliance is equipped with a power supply cord having a
3-prong grounding plug. To minimize possible shock hazard,
the cord must be plugged into a mating 3-prong grounding type
wall receptacle, grounded in accordance with local codes and
ordinances. If a mating wall receptacle is not available, it is the
personal responsibility
and obligation of the customer to have
a properly grounded. 3-prong wall receptacle
installed by a
qualified electrician.
See figure
7.
FIGURE I
* Trademarks
in Canada Used by Authority of Canadian Trademark Owner, WHIRLPOOL
CORPORATION,
U.S.A.
- IMPORTANT -
00 NOT REUOVE THIS INSTRUCTION SHEET UNTIL READY FOR INSTALLATION.
AlTEll COMPLETING THE /AfSTALl.ATIO/V,
SAVE THESE lMSTRUCTKJMS
FOH FUTURE USE.
1
Part No. 4152821