hit counter script
Toshiba Satellite P500 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite P500
  6. User manual

Toshiba Satellite P500 User Manual

Portable personal computer
Hide thumbs Also See for Satellite P500:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual , User Manual
TOSHIBA
Satellite P500 / Satellite P505
Qosmio X500 / Qosmio G60
Satellite P500D / Satellite P505D
Satellite P507 / Satellite P507D
Portable Personal Computer
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite P500

Summary of Contents for Toshiba Satellite P500

  • Page 1 TOSHIBA Satellite P500 / Satellite P505 Qosmio X500 / Qosmio G60 Satellite P500D / Satellite P505D Satellite P507 / Satellite P507D Portable Personal Computer User's Manual...
  • Page 2 Copyright © 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
  • Page 3 Adobe Systems Incorporated in the United States and/or other countries. Bluetooth™ is a registered trademark owned by its proprietor and used by TOSHIBA under license. ConfigFree is a trademark of TOSHIBA Corporation. WinDVD is a trademark of Corel Corporations. DVD MovieFactory is a trademark of Corel Corporations.

  • Page 4: Fcc Information

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, USB port, serial port,...
  • Page 5 "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC and/or R&TTE Directive 1999/5/EC. Responsible for CE- “TOSHIBA EUROPE GMBH, Hammfelddamm 8, marking: 41460 Neuss, Germany. Manufacturer: Toshiba Corporation, 1-1 Shibaura 1-chome, Minato-ku, Tokyo, 105-8001, Japan.
  • Page 6 Modem warning notice This information is applicable to the models equipped with a built-in modem. Conformity Statement The equipment has been approved to [Council Decision 98/482/EC - "TBR 21"] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network...

  • Page 7: Region Selection

    Japan regulations Region selection If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select the Japan region mode. It is illegal to use the modem in Japan with any other selection.

  • Page 8: Type Of Service

    FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.

  • Page 9: Fax Branding

    Fax branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity or individual sending the message and the telephone number of the sending machine or such business, other entity or individual.
  • Page 10 The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.
  • Page 11 Notes for use of this device in New Zealand ■ The grant of a Telepermit for a device in no way indicates Telecom acceptance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which this modem is capable of operating depend on a specific network implementation which is only one of many ways of delivering high quality voice telephony to customers.

  • Page 12: General Conditions

    second ring cadences) is not destroyed. ■ The preferred method of dialling is to use DTMF tones (ATDT...) as this is faster and more reliable than pulse (decadic) dialling. If for some reason you must use decadic dialling, your communications program must be set up to record numbers using the following translation table as this modem does not implement the New Zealand “Reverse dialling”...
  • Page 13 For more detailed information about the collection and recycling programmes available in your country, please visit our website (http:// eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. Disposal of batteries and/or accumulators...
  • Page 14 ENERGY STAR logo on the computer and the following information applies. TOSHIBA. is a partner in the Environmental Protection Agency’s (EPA) Energy Star Program and has designed this computer to meet the latest Energy Star guidelines for energy efficiency.

  • Page 15: Optical Disc Drive Safety Instructions

    Optical disc drive safety instructions Be sure to check the international precautions at the end of this section. Panasonic BD Combo UJ141/BD-R/RE UJ240 with Labelflash™ ■ The BD Combo/BD-R/RE drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference.
  • Page 16 Hitach-LG Data Storage DVD Super Multi GT20N/GT20F with Labelflash™ ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 17 TOSHIBA SAMSUNG STORAGE TECHNOLOGY DVD Super Multi TS-L633C/TS-L633Y ■ THIS DVD WRITABLE DRIVE EMPLOYS A LASER SYSTEM TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT EVER REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.
  • Page 18 Panasonic DVD Super Multi UJ890AD/UJ890ED with Labelflash™ ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 19 International Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station."...
  • Page 20 OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

  • Page 21: General Precautions

    General Precautions General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
  • Page 22 General Precautions To keep your computer in prime operating condition, protect your work area from: ■ Dust, moisture, and direct sunlight. ■ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones.

  • Page 23: Instruction Manual For Safety And Comfort

    General Precautions ExpressCard overheating Some PC and ExpressCards can become hot during prolonged use which may result in errors or instability in the operation of the device in question. In addition, you should also be careful when you remove a PC or ExpressCard that has been used for a long time.

  • Page 24: Table Of Contents

    Special features ......... 1-12 TOSHIBA Value Added Package ......1-14 Utilities and Applications.
  • Page 25 Table of Contents DVDs ..........2-13 BDs .
  • Page 26 TOSHIBA DVD Player ........
  • Page 27 Using the Hard Disk Drive (HDD) Protection ....4-45 TOSHIBA HDD Protection Properties......4-46 Details.
  • Page 28 Table of Contents HW Setup Chapter 7 Accessing HW Setup ........7-1 HW Setup Window .
  • Page 29 TOSHIBA support........

  • Page 30: Preface

    This manual tells you how to set up and begin using your TOSHIBA Satellite P500 / Satellite P505, Qosmio X500, Qosmio G60, Satellite P500D / Satellite P505D / Satellite P507D Series computer.

  • Page 31: Conventions

    Preface Chapter 4, Operating Basics, includes instructions on using the following devices: TouchPad, Sound System, optical media drives, modem, wireless communication and LAN. It also provides tips on care of the computer, and CD/DVDs. Chapter 5, Keyboard, describes special keyboard functions including hot keys.

  • Page 32: Key Operation

    Preface Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, Ctrl + C means you must hold down Ctrl and at the same time press C.

  • Page 33: Introduction

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.

  • Page 34: Software

    Online Manual Other software may be preinstalled dependant on the model purchased. Documentation ■ TOSHIBA Satellite P500 / Satellite P505, Qosmio X500, Qosmio G60, Satellite P500D / Satellite P505D / Satellite P507D Series Personal Computer User Information Guide ® ■...

  • Page 35: Features

    Built-in Your computer is equipped with one processor and processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start All programs TOSHIBA Utilities TOSHIBA PC diagnostic Tool.
  • Page 36 Introduction Video RAM Depends on the model you purchased. ® Mobile Intel HM55 Express Chipset model/ ® Mobile Intel HM57 Express Chipset model: Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology. ® Mobile Intel PM55/PM57 Express Chipset model in graphic chip by GeForce GTS 250M:...
  • Page 37 Introduction RTC Battery The internal RTC battery backs up the Real Time Clock and calendar. AC Adaptor The universal AC adaptor provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord. Because it is universal, it can receive a range of AC voltage from 100 to 240 volts;...
  • Page 38 Introduction BD-R/RE drive with Some models are equipped with a full-size BD-R/ Labelflash™ RE drive module that lets you record data to rewritable CD/DVD/BDs. It reads BD-ROM discs at maximum 6 speed, BD-ROM (DL) discs at maximum 6 speed, DVD-ROM's at maximum 8 speed and CD-ROM's at maximum 24 speed.
  • Page 39 Introduction BD Combo drive with Some models are equipped with a full-size BD Labelflash™ Combo drive module that lets you record data to rewritable CD/DVDs. It reads BD-ROM discs at maximum 6 speed, BD-ROM (DL) discs at maximum 6 speed, DVD-ROM's at maximum 8 speed and CD-ROM's at maximum 24 speed.
  • Page 40 Introduction DVD Super Multi Some models are equipped with a full-size DVD drive Super Multi drive module that lets you record data to rewritable CD/DVDs. It reads DVD- ROM's at maximum 8 speed and CD-ROM's at maximum 24 speed. It writes CD-R's at up to 24 speed, CD-RW's at up to 24 speed, DVD-R's at maximum 8 speed, DVD-RW's at maximum 6 speed.

  • Page 41: Pointing Device

    For more information regarding Graphics Processor Unit, please refer to the Disclaimers section in Appendix E or click the *5 above. Keyboard Built-In TOSHIBA keyboard, 104 keys or 105 keys with numeric keypad, compatible with IBM enhanced keyboard, dedicated cursor control, keys. Refer to Chapter 5, Keyboard, for details.
  • Page 42 Introduction Universal Serial Bus The computer has Universal Serial Bus ports that (USB 2.0) comply with the USB 2.0 standard, which enables data transfer speeds 40 times faster than the USB 1.1 standard. (The ports also support USB 1.1.) Ports with the icon ( ) have USB Sleep and Charge function.
  • Page 43 Introduction Headphone(S/P DIF) This jack outputs analog audio signals. This jack jack can be used also as S/P DIF jack and enables connection of optical digital correspondence apparatus. Microphone Jack A 3.5 mm mini microphone jack enables connection of a three-conductor mini jack for monaural microphone input.

  • Page 44: Special Features

    HDD password protection Two level password architecture Fingerprint authentication (not available on all models) Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. 1-12 User’s Manual...
  • Page 45 Introduction Hot Keys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program. Instant Security The hot key function Fn + F1 blanks the screen and disables the computer, providing data security.

  • Page 46: Toshiba Value Added Package

    USB Sleep and Charge function in Chapter 4, Operating Basics. TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Power TOSHIBA Power Saver provides you with the Saver features of more various power supply managements.
  • Page 47 The TOSHIBA Accessibility utility provides Accessibility support to movement impaired users when they need to use the TOSHIBA Hot-key functions. In use, the utility allows you to make the Fn key 'sticky', that is you can press it once, release it, and then press one of the 'F' keys in order to access its specific function.

  • Page 48: Utilities And Applications

    TOSHIBA Assist TOSHIBA Assist is a graphical user interface that provides easy access to help and services. HW Setup This program lets you customize your hardware settings according to the way you work with your computer and the peripherals you use.
  • Page 49 Introduction WinDVD BD for This software is provided for playback of Blu-ray TOSHIBA Disc. It has an on-screen interface and functions. To run WinDVD BD for TOSHIBA, click Programs InterVideo WinDVD WinDVD BD for TOSHIBA. Corel DVD You can edit digital video and make a DVD-Video and support Label Flash function.
  • Page 50 Introduction TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks. To run ConfigFree, click...

  • Page 51: Options

    * The availability of DDRII or DDRIII depends on the model you purchased. Battery pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare to increase your computer operating time. AC Adaptor If you use your computer at more than one site...

  • Page 52: Chapter 2 The Grand Tour

    The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer's front with its display panel in the closed position.
  • Page 53 The Grand Tour ■ Set the wireless communication switch to off in airplanes and hospitals. Check the wireless activity indicator. It will stop glowing when the wireless communication function is off. ■ Turn Wi-Fi and Bluetooth functionalities off when near a person who may have a cardiac pacemaker implant or other medical electric device.

  • Page 54: Left Side

    The Grand Tour Disk LED Disk LED indicates that the hard disk drive or optical disc drive is being accessed. Multiple Digital Multiple Digital Media Card Slot LED lights up Media Card Slot LED when the Multiple Digital Media Card Slot is accessed.
  • Page 55 The Grand Tour ■ Do not connect any cable other than a LAN cable to the LAN jack. It could cause damage or malfunction. ■ Do not connect the LAN cable to a power supply. It could cause damage or malfunction. eSATA/ eSATA/USB Combo The eSATA/USB combo port supports the USB...

  • Page 56: Right Side

    The Grand Tour Right side The following figure shows the computer's right side. 1. Headphone (S/P DIF) jack 2. Microphone Jack 3. USB Serial Bus (USB 2.0) Ports 4. Modem Jack or TV In Port* 5. External Monitor Port 6. DC in 19V Jack 7.
  • Page 57 The Grand Tour ■ Connection to any communication line other than an analog phone line could cause a computer system failure. ■ Connect the built-in modem only to ordinary analog phone lines. ■ Never connect the built-in modem to a digital line (ISDN). ■...

  • Page 58: Backside

    The Grand Tour Backside The following figure shows the computer's back panel. 1. Cooling Vents The backside of the computer Cooling Vents Cooling vents help prevent the CPU from overheating. Do not block the cooling vents. Make sure that foreign objects such as pins (or similar objects) are kept out of the vents, to avoid damaging the computer's circuitry.

  • Page 59: Underside

    The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. 1. Hard Disk Cover 2. Battery Pack Lock 3. Battery Pack 4. Battery Release Latch 5. Hard Disk Cover 6.
  • Page 60 The Grand Tour Memory Module This cover protects two memory module sockets -- Cover one or two modules are pre-installed. Refer to the Memory expansion section in Chapter 8, Optional Devices. Cooling Vents Cooling vents help prevent the CPU from overheating.

  • Page 61: Front With The Display Open

    The Grand Tour Front with the display open This section shows the front of the computer with the display open. Refer to the appropriate illustration for details. To open the display, lift the front of the display. Position the display at a comfortable viewing angle. 16 17 1.
  • Page 62 The Grand Tour Web Camera LED The Web Camera LED indicates whether the web camera is working or not. (Provided with some models) Web Camera Use the web camera to take your picture or send your image to web contacts. (Provided with some models) Built-in microphone The microphone is used with the Web Camera to...
  • Page 63 Press this button to launch an application program that allows for playing of CDs, DVDs or BDs. The application that is launched differs by model: Windows Media Player/TOSHIBA DVD PLAYER/WinDVD BD for TOSHIBA. Previous Button Skips backwards to the previous track, chapter or digital file.

  • Page 64: Optical Disc Drive

    The Grand Tour Optical Disc Drive An ATAPI interface controller is used for optical disc operation. When the computer is accessing an optical disc, an indicator on the system glows. Region codes for BD drive and media Optical disc drives and their associated media are manufactured according to the specifications of three marketing regions.

  • Page 65: Bd-R/Re Drive

    The Grand Tour BD-R/RE drive The full-size BD-R/RE drive module lets you record data to writable CD/ DVD/BDs as well as run either 12 cm (4.72") or 8 cm (3.15") for Tray type, 12 cm (4.72") for Slot type CD/DVDs without using an adaptor. Use only round standard (12cm) discs with this slot-loading optical drive.

  • Page 66: Bd Combo Drive

    The Grand Tour BD Combo drive The full-size BD Combo drive module lets you record data to writable CD/ DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") for Tray type, 12 cm (4.72") for Slot type CD/DVDs without using an adaptor. Use only round standard (12cm) discs with this slot-loading optical drive.

  • Page 67: Dvd Super Multi Drive

    The Grand Tour DVD Super Multi drive The full-size DVD Super Multi drive module lets you record data to writable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") for Tray type, 12 cm (4.72") for Slot type CD/DVDs without using an adaptor. Use only round standard (12cm) discs with this slot-loading optical drive.

  • Page 68: Ac Adaptor

    Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 69: Remote Controller

    The Grand Tour Remote controller A remote controller, which is provided with some models, enables you to perform some functions of your computer from a distance. You can use your remote controller with Media Center to play CDs, DVDs, BDs and videos, as well as view pictures. The remote controller helps you to control the playback of a movie with Media Center.

  • Page 70: Slim Size Remote Controller

    19. Volume + 20. DVD Menu CD/DVD/BD button Press this button to launch Windows Media Player / DVD Video Player / WinDVD BD for TOSHIBA. Brightness down Decreases the computer’s display panel brightness. Brightness up Increases the computer’s display panel brightness.
  • Page 71 The Grand Tour Power Starts or terminate the operating system.This button functions like the power button of your computer. By default, the Sleep mode is equivalent to the power off state of your computer. To change the setting, click Start Control panel System and Security Power Options...

  • Page 72: Using The Remote Controller

    The Grand Tour Fast forward Moves the media (video, DVD, music, and so on) forwards. Replay Moves media backward (seven seconds for videos, one music track or one DVD chapter at a time). Stop Stops the currently playing media. Skip Moves media forward (30 seconds for videos, one music track or one DVD chapter at a time).
  • Page 73 The Grand Tour 15˚ 1. Infrared Receiver Window 2. Remote Controller Operational range of the remote controller Even if within the effective scope as described above, the remote controller may malfunction or not work correctly in the following cases. ■ When an obstacle stands between the infrared receiver window of your computer and the remote controller.

  • Page 74: Installing/Removing Batteries

    The Grand Tour Installing/Removing batteries Be sure to install the provided CR2016 type batteries before using the remote controller. The procedures for installing and removing the batteries vary depending on the type of the remote controller. Check the type and then install or remove the batteries as instructed.

  • Page 75: Installing The Batteries

    The Grand Tour Installing the batteries 1. Open the battery cover on the back side of the remote controller. 1. Battery Cover Opening the battery cover 2. Be sure to place the batteries with correct polarities. Press the battery down to the stopper then push it forward to fit into the battery case. 1.

  • Page 76: Placing The Slim Size Remote Controller

    The Grand Tour Slim size remote controller 1. Open the battery cover on the back side of the remote controller. 2. Hold down the stopper and slide the battery out of battery case. 1. Stopper 2. Battery Removing the batteries 3.

  • Page 77: Getting Started

    Getting Started Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ All users should be sure to read the section Starting up for the first time. ■ Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer.

  • Page 78: Connecting The Ac Adaptor

    ■ Always use the TOSHIBA AC adaptor that was included with your computer or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 79 Getting Started 1. Connect the power cord to the AC adaptor. Connecting the power cord to the AC adaptor Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model. 2. Connect the AC adaptor's DC output plug to the DC IN 19V jack on the right of the computer.

  • Page 80: Opening The Display

    Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer.

  • Page 81: Turning On The Power

    Getting Started Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Windows setup.

  • Page 82: Turning Off The Power

    Getting Started Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Sleep Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating system’s main screen.
  • Page 83 Getting Started ■ When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in Power Options . ■ To restore operation from Sleep Mode, press the power button or press any key. The latter action works only if Wake-up on Keyboard is enabled in HW Setup.

  • Page 84: Hibernation Mode

    Getting Started ■ When the computer is shut down to Sleep Mode, the power indicator flashes orange. ■ If you are operating the computer on battery power, you can lengthen the operating time by turning it off to Hibernation Mode, as Sleep Mode consumes more power.

  • Page 85: Restarting The Computer

    Getting Started Automatic Hibernation Mode The computer will enter Hibernation mode automatically when you press the power button or close the Display Screen. First, however, make the appropriate settings according to the steps below. 1. Open the Control Panel. 2. Open System and Security and open Power Options. 3.

  • Page 86: Create Optical Recovery Discs

    5. Double-click the Recovery Media Creator icon on your desktop, or select the application from Start menu. 6. After TOSHIBA Recovery Media Creator starts, select the type of media and the title you wish to copy to the media then click the Create button.

  • Page 87: Restoring The Preinstalled Software From The Recovery Hdd

    1. Turn off your computer. 2. Hold down the 0 (zero) key on the keyboard and turn on your computer. 3. When “TOSHIBA Leading Innovation >>>” appears, release the 0 (zero) key on the keyboard. A menu appears. 4. Follow the on-screen instructions.

  • Page 88: Restoring The Preinstalled Software From Recovery Media

    1. Load the Recovery Media in the optical media drive and turn off the computer's power. 2. Hold down the F12 key and turn on the power. When TOSHIBA Leading Innovation >>> appears, release the F12 key. 3. Use the upper or lower cursor key to select the CD/DVD in the display menu.

  • Page 89: Operating Basics

    Operating Basics Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad, optical media drives, sound system, modem, the wireless LAN and LAN. It also provides tips on caring for your computer. Using the TouchPad To use the TouchPad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.

  • Page 90: Touch Pad Gesture

    Operating Basics Two buttons below the keyboard are used like the buttons on a mouse pointer. Press the left button to select a menu item or to manipulate text or graphics designated by the pointer. Press the right button to display a menu or other function depending on the software you are using.

  • Page 91: Using The Fingerprint Sensor

    Operating Basics To use a Pinch Zoom gesture: 1. Place two fingers down on the TouchPad surface. 2. Slide the fingers further apart to zoom in or slide the fingers closer together to zoom out. For the best zooming experience, use the tips of your fingers.

  • Page 92: How To Swipe The Finger

    Operating Basics How to swipe the finger Using the following steps when swiping fingers for fingerprint registration or authentication will help to minimize authentication failures: 1. Align the first joint of the finger to the center of the sensor. 2. While lightly touching the sensor, swipe the finger towards you until the sensor surface becomes visible.

  • Page 93: Points To Note About The Fingerprint Sensor

    Operating Basics Points to note about the fingerprint sensor Failure to follow these guidelines might result in (1) damage to the sensor or cause sensor failure, (2) fingerprint recognition problems, or lower fingerprint rec-ognition success rate. ■ Do not scratch or poke the sensor with your nails or any hard or sharp objects.

  • Page 94: How To Delete The Fingerprint Data

    Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times.Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.

  • Page 95: Points To Note About The Fingerprint Utility

    Operating Basics Points to note about the fingerprint utility ■ If the Windows file encryption function EFS (Encryption File System) is used to encrypt a file, the file cannot be further encrypted using the encryption function of this software. ■ You can back up the fingerprint data or the information registered to Password Bank.

  • Page 96: Windows Logon Via Fingerprint Authentication

    ■ It is necessary to register the User Password before using the fingerprint Pre-OS feature and its extended function, the fingerprint Single Sign-On feature. Please use TOSHIBA HW Setup to register the User Password. ■ If you fail fingerprint authentication more than five times, you must enter the User Password or Supervisor Password manually to start the computer.

  • Page 97: Fingerprint Single Sign-On Feature

    Password and Windows Logon password before using the fingerprint Pre- OS feature and this fingerprint Single Sign-On feature. Please use TOSHIBA HW Setup to register your User Password. Only one fingerprint authentication is required to replace the User Password (and, if selected, the HDD user and Supervisor passwords) and Windows Logon password.

  • Page 98: Usb Sleep And Charge Function

    TOSHIBA does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.

  • Page 99: Starting The Usb Sleep And Charge Utility

    Starting the USB Sleep and Charge Utility To start the utility, click Start All Programs TOSHIBA Utilities USB Sleep and Charge. Enabling USB Sleep and Charge This utility can be used to enable and disable the USB Sleep and Charge function.

  • Page 100: Using The Web Camera

    Operating Basics Using the Web Camera This section describes the bundled webcam utility, which can capture still and video images. The web camera will auto-run when Windows starts. Please remove the protective plastic-film before using the Web Camera. 1. Built-in microphone * 2.

  • Page 101: Using The Software

    Operating Basics Using the software The web camera software is pre-configured to start when you turn on Windows. To start it manually, go to Start All Programs Toshiba Utilities Web Camera Application. 1. Capture Still Images 2. Video Recording 3. Audio Recording 4.

  • Page 102: Using The Microphone

    Master Volume panel. Using the TOSHIBA Face Recognition TOSHIBA Face Recognition uses a face verification library to verify the face data of users when they log on to Windows. This way the user can avoid having to enter a password, which makes the logon process easier.

  • Page 103: Disclaimer

    Toshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.

  • Page 104: How To Delete The Face Recognition Data

    Delete image data, account information, and personal record data created during registration. To delete the Face Recognition Data, follow the steps as described below: 1. Click Start All Programs TOSHIBA Utilities Face Recognition. The Management screen is displayed. 2. Select a user.

  • Page 105: How To Launch The Help File

    Utilities Face Recognition Help. Windows Logon via TOSHIBA Face Recognition This section explains how to logon to Windows with TOSHIBA Face Recognition. Two authentication modes are provided. ■ AUTO Mode Logon screen: If the face authentication file is selected by default, you can log on without using the keyboard or mouse.

  • Page 106: Loading Discs

    Operating Basics Operation is the same for all optical media drives. The full-size drive provides high-performance execution of CD/DVD/BD-based programs. You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVD/BDs without an adaptor. An ATAPI interface controller is used for CD/DVD/BD operation. When the computer is accessing a CD/DVD/BD, an indicator on the system glows.
  • Page 107 Operating Basics Pressing the eject button b. Pressing the eject button will not pop open the drawer when the disc drive's power is off. If the power is off, you can pop open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
  • Page 108 Operating Basics Pulling the drawer open 3. Place the disc, label side up, in the drawer. Inserting a disc When the drawer is fully opened, the edge of the computer will extend slightly over the disc tray. Therefore, you will need to turn the disc at an angle when you place it in the tray.
  • Page 109 Operating Basics Closing the disc drawer ■ Slot ODD To load CD/DVD's, follow the steps as listed below and refer to following figures. 1. When the computer's power is on, insert CD/DVD into the ODD directly. Inserting a disc User’s Manual 4-21...

  • Page 110: Removing Discs

    Operating Basics Removing discs ■ Tray ODD To remove the disc, follow the steps below and refer to the figure. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical media drive indicator to go out before you open the drawer.

  • Page 111: Writing Cd/Dvd/Bds

    Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R-RW and DVD-R/+R/-RW/+RW/-RAM and BD-R/RE discs. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 112 Operating Basics DVD-R: DVD Specifications for Recordable Disc for General Version 2.0 TAIYO YUDEN Co.,Ltd. (for 8x and 16x speed media) DVD-R (Dual Layer): MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media) DVD-R for Labelflash: FUJIFILM CORPORATION (for 16x speed media) DVD+R: MITSUBISHI KAGAKU MEDIA CO., LTD.

  • Page 113: Before Writing Or Rewriting With The Bd Combo Drive

    Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R-RW and DVD-R/+R/-RW/+RW/-RAM discs. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.

  • Page 114: Before Writing Or Rewriting With The Dvd Super Multi Drive

    Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R-RW and DVD-R/+R/-RW/+RW/-RAM discs. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 115 Operating Basics DVD+R: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media) TAIYO YUDEN CO., Ltd. (for 8x and 16x speed media) DVD+R (Double Layer): MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2.4x and 8x speed media) DVD+R for Labelflash: FUJIFILM CORPORATION (for 16x speed media) DVD-RW: DVD Specifications for Recordable Disc for Version 1.1 or version 1.2...
  • Page 116 Write from the computer's hard disc drive to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than Corel Movie factory for TOSHIBA is not recommended. 4-28 User’s Manual...

  • Page 117: When Writing Or Rewriting

    RW/-RAM, DVD+R/+RW or BD-R/-RE disc. Do not use cut-and-paste. The original data will be lost if there is a write error. Disclaimer (DVD Super Multi drive or BD-R/RE drive) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R-RW or DVD-R/-R(DL)/-RW/+R/+R(DL)/+RW/- RAM or BD-R/RE disc that may be caused by writing or rewriting with this product.

  • Page 118: Data Verification

    2. Mark the Verify written data check box. 3. Select File Open or Full Compare mode. 4. Click OK. How to learn more about TOSHIBA Disc Creator Please refer to the Help files for additional TOSHIBA Disc Creator information. Video ®...

  • Page 119: How To Make A Dvd-Video

    How to make a DVD-Video Simplified steps for making a DVD-Video from adding video source: 1. Click Start All Programs DVD MovieFactory for TOSHIBA DVD MovieFactory Launcher to launch DVD MovieFactory. 2. Click Create Video Disc New Project to invoke 2nd Launcher.
  • Page 120 TOSHIBA DVD PLAYER software application. ■ When playing your recorded Blu-ray Disc on your computer, please use WinDVD BD for TOSHIBA software application. ■ If you use an over-used rewritable disc, the full formatting might be locked. Please use a brand new disc.

  • Page 121: Toshiba Dvd Player

    Operating Basics TOSHIBA DVD Player Please be aware of the following limitations when you use the TOSHIBA DVD PLAYER: Notes on use ■ Frame dropping, audio skipping or out of sync audio and video may occur during playback of some DVD Video titles.
  • Page 122 Operating Basics Display Devices & Audio 1. "TOSHIBA DVD PLAYER" will only run when "Colors" is set to "True Color (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in the "Display Settings". To open the Display Settings, click Start...

  • Page 123: Using Windvd Bd For Toshiba

    Open TOSHIBA DVD PLAYER HELP TOSHIBA DVD PLAYER features and instructions are also explained in detail in "TOSHIBA DVD PLAYER Help". Use the following procedure to open "TOSHIBA DVD PLAYER Help". ■ Click the "Help" button ( ) in the Display Area.

  • Page 124: Starting Windvd Bd For Toshiba

    Starting WinDVD BD for TOSHIBA Use the following procedure to start "WinDVD BD for TOSHIBA". 1. When a Blu-ray disc is set in the BD drive, WinDVD BD for TOSHIBA starts automatically. 2. Touch the CD/DVD/BD button on the Front operation panel. Or select...

  • Page 125: Media Care

    Open WinDVD BD for TOSHIBA HELP WinDVD BD for TOSHIBA features and instructions are also explained in detail in "WinDVD BD for TOSHIBA Help". Use the following procedure to open "WinDVD BD for TOSHIBA Help". ■...

  • Page 126: Region Selection

    To select a region, follow the steps below. 1. Click start All Programs TOSHIBA Networking Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 127: Modem Selection

    Operating Basics Open dialog box, if the modem and Telephony Current Location region code do not match. A warning dialog box is displayed if current settings for region code and telephony location are incorrect. Modem Selection If the computer cannot recognize the internal modem, a dialog box is displayed.

  • Page 128: Disconnecting

    Operating Basics Do not pull on the cable or move the computer while the cable is connected. Disconnecting To disconnect the internal modem cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector.

  • Page 129: Wireless Communications

    Operating Basics Wireless communications The computer’s wireless communication function supports both Wireless LAN and Bluetooth devices. ■ Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields.

  • Page 130: Security

    TOSHIBA strongly recommends the customer to enable the encryption function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Bluetooth Stack for Windows by TOSHIBA (depends on the model you purchased) ®...

  • Page 131: Wireless Communication Switch

    Operating Basics Wireless communication switch You can enable or disable the Wireless LAN function with the on/off switch. No transmissions are sent or received when the switch is off. Slide the Switch to turn it on and turn it off. Set the switch to off in airplanes and hospitals.

  • Page 132: Connecting Lan Cable

    Operating Basics Connecting LAN cable To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices connected to the computer. 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place.

  • Page 133: Moving The Computer

    This computer has a function for reducing the risk of damage on the hard disk drive. Using an acceleration sensor built into the computer, TOSHIBA HDD Protection detects vibration shocks and similar signs of movement of the computer, and automatically moves the Hard Disk Drive head to a safe position to reduce the risk of damage that could be caused by head-to-disk contact.

  • Page 134: Toshiba Hdd Protection Properties

    Operating Basics The TOSHIBA HDD Protection function does not guarantee that the hard disk drive will not be damaged. When vibration is detected, a message will be displayed on the screen, and the icon in the Taskbar notification area will changed to the protection state.

  • Page 135: Details

    Intensely shaking the computer or other subjecting it to strong impacts may cause damage to the computer. Details To open the Details window, click the Setup Detail button in the TOSHIBA HDD Protection Properties window. Detection Level Amplification When the AC adaptor is disconnected or the lid is closed, HDD Detection assumes that the computer will be carried and sets the detection level to the maximum for 10 seconds.

  • Page 136: The Keyboard

    The Keyboard Chapter 5 The Keyboard The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are five types of keys: typewriter keys, function keys, soft keys, Windows special keys, and cursor control keys.

  • Page 137: F1 ... F12 Function Keys

    The Keyboard F1 ... F12 function keys The function keys (not to be confused with Fn) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed.

  • Page 138: Hot Keys

    The Keyboard Hot keys Mute: Turns the volume on and off. Lock: Enters "Lock computer" mode. To restore your desktop, you need to log on again. Power plan: Displays the power save modes and lets you change the power settings. Sleep: This hot key switches the system to Sleep Mode.

  • Page 139: Fn Sticky Key (Depends On The Model You Purchased)

    Adobe Reader and the icons on the desktop. Fn Sticky key (Depends on the model you purchased) You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and then press an "F number" key.

  • Page 140: Windows Special Keys

    The Keyboard Windows special keys The keyboard provides two keys that have special functions in Windows: Windows logo key activates the start menu and the other, the application key, has the same function as the secondary mouse button. This key activates the Windows start menu. This key has the same function as the secondary mouse button.

  • Page 141: Power And Power-Up Modes

    Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources, including charging the computer and battery tips for saving battery power, and power up modes.

  • Page 142: Power Indicators

    Power and Power-Up Modes Table Power conditions Power on Power off (no operation) Universal Battery charge is • Operates above low battery • LED: Battery off trigger point adaptor Battery charge is • Operates connected below low battery • LED: Battery flashes orange trigger point Battery charge is •...

  • Page 143: Battery Types

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Sleep Mode.

  • Page 144: Real Time Clock Battery

    The computer's RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.
  • Page 145 Power and Power-Up Modes The charge in the RTC battery is getting low or has been exhausted. You will need to set the date and time within the BIOS setup using the following steps: 1. Press F2 key - the BIOS setup screen will be displayed. 2.

  • Page 146: Care And Use Of The Battery Pack

    The battery pack is lithium ion battery, which can explode if not replaced, used, handled or disposed of properly. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Charge the battery pack only in an ambient temperature between 5 and 35 degrees Celsius.

  • Page 147: Battery Charging Notice

    Power and Power-Up Modes Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack 4-10 hours 4 hours max (6-cell, 12-cell) RTC battery About 24 hours About 24 hours The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the...

  • Page 148: Monitoring Battery Capacity

    Power and Power-Up Modes Monitoring battery capacity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the task bar ■ Via the Windows Mobility Center window ■ Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time.

  • Page 149: Retaining Data With Power Off

    Power and Power-Up Modes Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Battery pack Approximately 2 days (6-cell, 12-cell) (Sleep mode, 6-cell) Approximately 3.5 days (Sleep mode, 12-cell) Approximately 1 month (Shut down mode, all type of battery...

  • Page 150: Replacing The Battery Pack

    Power and Power-Up Modes Replacing the battery pack When the battery pack reaches the end of its operating life, you will need to install a new one. The life of the battery pack is generally about 500 recharges. If the Battery indicator flashes orange shortly after fully recharging the battery, the battery pack needs to be replaced.

  • Page 151: Installing The Battery Pack

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. If the latch is unintentionally released, you may get injured by the dropped battery.

  • Page 152: Starting The Computer By Password

    Power and Power-Up Modes Starting the computer by password If you have already registered a password, there are two ways to start the computer: ■ Swipe your fingerprint on the sensor if you have already registered the fingerprint with the Fingerprint utility and enabled Fingerprint Power- on Security.

  • Page 153: Power-Up Modes

    Power and Power-Up Modes Power-up modes The computer has the following power-up modes: ■ Boot Mode: Computer shuts down without saving data. Always save your work before you turn the computer off in boot mode. ■ Hibernation Mode: Data in memory is saved to the hard disk. ■...

  • Page 154: Chapter 7 Hw Setup

    HW Setup Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Password, Display, Boot Priority, Keyboard, LAN, and USB. Accessing HW Setup To run HW Setup, click , All Programs, TOSHIBA, Utilities, HWSetup.

  • Page 155: User Password

    HW Setup Password This tab allows you to set or reset the user password for power on. User Password Lets you register a new password or un-register an existing password. Not Registered Un-registers an existing password Registered Register a new password by following the on screen instructions Owner String This blank field is used to display a message when the password field is...
  • Page 156 HW Setup Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Sleep Mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in Sleep Mode. Enabled Enables the Wake-up on Keyboard function.

  • Page 157: Chapter 8 Optional Devices

    Optional Devices Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■ ExpressCard ■ SD (Secure Digital) / SDHC (Secure Digital High Capacity) /...

  • Page 158: Expresscard

    Optional Devices ExpressCard The computer is equipped with an ExpressCard expansion slot that can accommodate two standard module formats: anExpressCard/34 module and an ExpressCard/54 module. An ExpressCard module is a small, modular add-in card technology based on PCI Express and Universal Serial Bus (USB) interfaces.

  • Page 159: Removing An Expresscard

    Optional Devices Removing an ExpressCard ■ Before removing an ExpressCard, make sure that any applications or system services are not using the card. ■ Be sure to disable the ExpressCard prior to removing it. Otherwise, the system may be fatally damaged. To remove an ExpressCard, follow the steps below.

  • Page 160: Sd/Sdhc/Mmc/Memory Stick / Memory Stick Pro/Xd Memory Cards

    Optional Devices SD/SDHC/MMC/MEMORY STICK / MEMORY STICK PRO/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MEMORY STICK/MEMORY STICK PRO/ xD memory cards. These memory cards allow you to easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory.

  • Page 161: Installing A Memory Card

    Optional Devices Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Inserting a memory card Be sure the memory card is oriented properly before you insert it. If Windows fails to read the card, remove it then re-insert it.

  • Page 162: Memory Card Care

    Optional Devices ■ Make sure the memory card indicator is out before you remove the card or turn off the computer's power. If you remove the card or turn off the power while the computer is accessing the card, you may lose data or damage the card.

  • Page 163: Memory Expansion

    RAM. This section describes how to install and remove a memory module. ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost.
  • Page 164 Optional Devices 1. Memory Module Cover Removing the memory module cover 6. Fit the module's connectors into the computer's connectors at about a 45 degree angle. Press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.
  • Page 165 Optional Devices 1. Slot A 2. Slot B Installing the memory module 8. Seat the cover and secure it with the screws. 9. Replace the battery pack as described in Chapter 6, Power and Power- Modes. 10. Turn the power on and make sure the added memory is recognized. Open System in the Control Panel and click the General tab.

  • Page 166: Removing A Memory Module

    Optional Devices Removing a memory module Before removing the memory module, make sure the computer is in boot mode. To remove the memory module: 1. Be sure the power is off and all cables are disconnected from the computer. 2. Turn the computer upside down and remove the battery and the screws securing the memory module cover.

  • Page 167: Additional Battery Pack

    Optional Devices 1. Latches Removing the memory module 6. Seat the cover and secure it with screws. Replace the battery pack. Additional battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery.

  • Page 168: External Monitor

    Optional Devices External monitor An external analog monitor can be connected to the external monitor port on the computer. The computer supports VGA and Super VGA video modes. To connect a monitor, follow the steps below. The hibernation and sleep feature can be used with an external monitor. Simply enable hibernation and sleep and the computer will maintain the data as it is displayed on the external monitor.

  • Page 169: Setting For Display Video On Hdmi

    Optional Devices ■ When you connect a television or external monitor to the HDMI port and the display output device is set to HDMI. When you unplug the HDMI cable and re-plug it in please wait at least 5 seconds before you replug the HDMI cable again. ■...

  • Page 170: Precautions

    There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. 2. Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.
  • Page 171 Optional Devices 3. Disconnect the cable from the computer then from the i.LINK device. Refer also to the documentation that came with your i.LINK device. User’s Manual 8-15...

  • Page 172: Esata (External Serial Ata)

    Optional Devices eSATA (External Serial ATA) An eSATA device can be connected to the eSATA/USB combo port on the computer. Connecting an eSATA device To connect an eSATA device, follow the steps below: 1. Connect an eSATA cable to the eSATA/USB combo port. Make sure the connector is properly aligned with the socket.

  • Page 173: Disconnecting An Esata Device

    Optional Devices Disconnecting an eSATA device When you have finished using an eSATA device, you can follow the procedures below in order to disconnect it: 1. Wait for the indicator light of an eSATA device to go out to make sure all activity has stopped.

  • Page 174: Troubleshooting

    Troubleshooting Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 175: Preliminary Checklist

    Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 176: Hardware And System Checklist

    Troubleshooting Software The problems may be caused by your software or disc. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation.

  • Page 177: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: ■...

  • Page 178: Ac Power

    Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the Battery indicator. Refer to Chapter 6, Power and Power-Up Modes for more information. Problem Procedure AC adaptor doesn’t Check the connections. Make sure the cord is power the computer firmly connected to the computer and a power outlet.

  • Page 179: Disposing Of Pc And Pc Batteries

    Troubleshooting Problem Procedure Unplug the AC adaptor and remove the battery to make sure the terminals are clean. If necessary, wipe them with a soft dry cloth dipped in alcohol. Connect the AC adaptor and replace the battery. Make sure it is securely seated. Check the Battery indicator.

  • Page 180: Real Time Clock

    Troubleshooting ■ Reformatting the media ■ Reinstalling an operating system from the recovery CD-ROM The procedures above delete only the initial part of the data used for file management. This makes the file invisible to the operating system, but the data can still be read by specialized utilities. If you dispose of the PC, please delete all the data on its hard disk drive.

  • Page 181: Lcd Panel

    Troubleshooting LCD panel Apparent LCD problems may be related to the computer's setup. Problem Procedure No display Press hot keys Fn + F5 to change the display priority, to make sure it is not set for an external monitor. Problems above remain Refer to your software’s documentation to unresolved or other determine if the software is causing the difficulty.

  • Page 182: Hard Disk Drive

    Troubleshooting Hard disk drive Problem Procedure Computer does not boot There may be a problem with your operating from hard disk drive system files. Refer to your operating system documentation. Slow performance Your files may be fragmented. Run disk Defragmenter to check the condition of your files and disk.

  • Page 183: Pointing Device

    Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA. Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording.
  • Page 184 Troubleshooting TouchPad Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to Pad shaped as an hourglass, wait for it to return to its operation normal shape and try again to move it. Double-tapping does Try changing the double-click speed setting in not work...

  • Page 185: Usb

    Troubleshooting USB mouse Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to mouse shaped as an hourglass, wait for it to resume its operation normal shape and try again to move it. Make sure the mouse is properly connected to the USB port.

  • Page 186: Usb Sleep And Charge Function

    If this function can not be still used, uncheck the "USB Sleep and Charge" check box in the TOSHIBA USB Sleep and Charge Utility and stop using the function. The battery depletes If USB Sleep and Charge function is enabled, the quickly even when I computer’s battery will discharge during...

  • Page 187: Memory Expansion

    The "USB WakeUp When "USB Sleep and Charge function" is set to function" does not work [Enabled] in the TOSHIBA USB Sleep and Charge Utility, the "USB WakeUp function" does not work for ports that support the USB Sleep and Charge function.

  • Page 188: Sound System

    Troubleshooting Sound system Refer also to documentation for your audio devices. Problem Procedure No sound is heard Check the software volume settings. Make sure the headphone connection is secure. If problems persist, contact your dealer. Monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation.

  • Page 189: Lan

    Troubleshooting Problem Procedure After making a call you Make sure the tone or pulse selection in your can’t hear a ring communications application is set correctly. You can also use the ATD command. Communication is cut The computer will automatically cut off off unexpectedly communication when connection with the carrier is not successful for a set time interval.

  • Page 190: Fingerprint Sensor

    If problems persist, contact your dealer. Fingerprint Pre-OS Please use TOSHIBA HW Setup to register the feature or Single Sign User Password if it was not registered. On feature cannot be...

  • Page 191: Certain Models)

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system.

  • Page 192: Where To Write

    Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below. Outside of Europe In Europe Australia Germany & Austria TOSHIBA Australia Pty. Ltd.

  • Page 193: Specifications

    Specifications Appendix A Specifications This appendix summarizes the computer's technical specifications. Environmental Requirements Operating Non-operating Ambient temperature 5°C to 35°C -20°C to 60°C Relative humidity 20% to 90% 10% to 95% Altitude (from sea 0 to 10,000 feet 0 to 40,000 feet level) Power Requirements AC adaptor...
  • Page 194 Specifications Communication specifications Communication Data: Full duplex System Fax: Half duplex Communication Data protocol ITU-T-Rec V.21/V.22/V.22bis/V.32/ (Former CCITT) V.32bis/V.34/V.90/V.92 Bell 103/212A Fax: ITU-T-Rec V.17/V.29/V.27ter/V.21 ch2 (Former CCITT) Communication Data transmission and reception Speed 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.90 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/40000/41333/42666/44000/45333/ 46666/48000/49333/50666/52000/53333/54666/...

  • Page 195: Display Controller

    Display Controller Appendix B Display Controller Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off. A high-resolution external monitor connected to the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16M colors. The display controller also controls the video mode, which uses industry standard rules to govern the screen resolution and the maximum number of colours that can be displayed on screen.

  • Page 196: Wireless Lan

    Wireless LAN Appendix C Wireless LAN Card Specifications Form Factor Mini PCI TypeIII Compatibility WiMAX (depending on the model you purchased) ■ IEEE 802.16 Standard for Broadband Wireless Access ■ WiMAX (Worldwide Interoperability for Microwave Access) certified by the WiMAX Forum.

  • Page 197: Radio Characteristics

    Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
  • Page 198 Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.

  • Page 199: Ac Power Cord And Connectors

    AC Power Cord and Connectors Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters...
  • Page 200 AC Power Cord and Connectors In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.
  • Page 201 95°F) or >25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to your computer documentation or visit the Toshiba website at www.pcsupport.toshiba.com for details). CPU performance may also vary from specifications due to design configuration.

  • Page 202: Battery Life

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 203: Hdd Drive Capacity

    Disclaimers HDD drive capacity One Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and therefore shows less storage capacity.

  • Page 204: External Hdd Capacity

    Disclaimers External HDD Capacity One Gigabyte (GB) means 10 =1,000,000,000 bytes using powers of 10. A computer operating system, however, reports storage capacity using powers of 2 for the definition of 1GB=2 =1,073,741,824 bytes, and therefore shows less storage capacity. Available storage capacity will also be less if the computer includes one or more pre-installed operating systems, pre-installed software applications, or media content.

  • Page 205: Toshiba Pc Health Monitor

    ■ Once enabled, you may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel. Doing so will automatically delete all collected information from the HDD.

  • Page 206: Starting The Toshiba Pc Health Monitor

    PC Health Monitor. ■ Click the icon in the notification area, then click the "TOSHIBA PC Health Monitor is not enabled. Please click here for more details." message when it is displayed. This message will no longer be displayed after clicking "Please enable software now"...
  • Page 207 Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system AC: Alternating current ACPI: Advanced Configuration and Power Interface AMT: Intel Active Management Technology ASCII: American Standard Code for Information Interchange BIOS: basic input/output system bps: bits per second CD: compact disc...
  • Page 208 Glossary HDD: hard disk drive HDCP: high-bandwidth digital content protection HDMI: high definition multimedia interface HDMI-CEC: high definition multimedia interface consumer electronics control IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engineers IMSM: Intel Matrix Storage Manager I/O: input/output IRQ: interrupt request KB: kilobyte LAN: local area network...
  • Page 209 Glossary adaptor: A device that provides a compatible connection between two units. For example, the computer's internal display adapter receives information from the software and translates it into images on the screen. An adapter can take a number of forms, from a microprocessor to a simple connector: An intelligent adapter (one that is capable of doing some processing) may also be called a controller.
  • Page 210 Glossary bootable disk: See system disk. bps: Bits per second. Typically used to describe the data transmission speed of a modem. buffer: The portion of the computer's memory where data is temporarily stored. Buffers often compensate for differences in the rate of flow from one device to another.
  • Page 211 Glossary COM1, COM2, COM3 and COM4: The names assigned to the serial and communication ports. commands: Instructions you enter at the terminal keyboard that direct the actions of the computer or its peripheral devices. compatibility: 1) The ability of one computer to accept and process data in the same manner as another computer without modifying the data or the media upon which it is being transferred.
  • Page 212 Glossary device driver: A program (called a "driver") that permits a computer to communicate with a device. dialog box: A window that accepts user input to make system settings or record other information. disable: To turn a computer option off. See also enable. disk drive: The device that randomly accesses information on a disk and copies it to the computer's memory.
  • Page 213 Glossary erase: See delete. escape: 1) A code (ASCII code 27), signaling the computer that what follows are commands; used with peripheral devices such as printers and modems. 2) A means of aborting the task currently in progress. escape guard time: A time before and after an escape code is sent to the modem which distinguishes between escapes that are part of the transmitted data, and escapes that are intended as a command to the modem.
  • Page 214 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 215 Glossary K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys. Each keystroke activates a switch that transmits a specific code to the computer.
  • Page 216 Glossary main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte. megahertz: A unit of wave frequency that equals 1 million cycles per second. See also hertz. memory: Typically refers to the computer's main memory, where programs are run and data is temporarily stored and processed.
  • Page 217 Glossary OCR: Optical Character Recognition (reader). A technique or device that uses laser or visible light to identify characters and input them into a storage device. online state: A functional state of a peripheral device when it is ready to receive or transmit data.
  • Page 218 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver: A TOSHIBA utility that lets you set the parameters for various power-saving functions. program: A set of instructions a computer can execute that enables it to achieve a desired result.
  • Page 219 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. USB: Universal Serial Bus. This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.
  • Page 220 Glossary VGA: Video Graphics Array is an industry standard video adaptor that lets you run any popular software. volatile memory: Random access memory (RAM) that stores information as long as power is supplied to the computer. warm start: Restarting or resetting a computer without turning it off. ®...
  • Page 221 Index Index Express card inserting, 8-2 AC adaptor, 1-5 removing, 8-3 additional, 1-19 Expresscard, 8-2 connecting, 3-2 ASCII characters, 5-5 Floppy disk using, 4-17 Battery Fn + Esc (sound mute), 5-3 charging, 6-6 Fn + F1 (instant security), 5-3 extending battery life, 6-9 Fn + F2 (power save mode), 5-3 indicator, 6-1 Fn + F3 (Sleep Mode), 5-3...
  • Page 222 Power, 9-4 properties menu, 4-38 Real Time Clock, 9-7 region selection, 4-38 Self test, 9-4 Monitor, external, 1-9, 8-12 Sound system, 9-15 Support from TOSHIBA, 9-18 Ports, 1-9 System start-up, 9-3 external monitor, 1-9 USB, 9-12 USB, 1-10 Wireless LAN, 9-16...
  • Page 223 5-2 ScrLock, 5-2 Sound System, 1-10 Headphone(S/P DIF) jack, 1-11 microphone jack, 1-11 mute hot keys, 5-3 TOSHIBA ConfigFree, 1-18 Touch Pad, 1-9 using, 4-1 USB, 1-10 Video RAM, 1-4 Wireless communication switch, 4-43 indicator, 4-43 Wireless LAN, 1-11 using, 4-41 User’s Manual...

This manual is also suitable for:

Qosmio x500Qosmio g60Satellite p500dSatellite p505dSatellite p507Satellite p507d ... Show all

Table of Contents