Advertisement
Quick Links
E
Siemens OC130S Installation Instructions:
Before you begin:
Ensure you have an update copy of your Operating system including Direct X8.1 or higher. You
can download this update free of charge from Microsoft at the following links. Click
here for
Windows 98/ME
or click
here for Windows 2000/XP
to download the latest version. (Hint:
Windows XP, Vista or 7 users and anyone who has the latest Windows Updates will not have to
do this step.)
Step 1:
Install the Siemens OC130S Softphone. You may need your Network Administrator to assist you
in getting this done.
Step 2:
Download and install Eutectics Siemens integration software. Follow this link
http://www.eutecticsinc.com/download13/DISK1/IPP200_SiemensSoftPhone.htm
to install the
software. You will need a Username and Password to access this link.
Step 3:
Plug in the Eutectics IPP Phone to the PC and let it install itself. If you are prompted for the
location of the drivers, enter "C:\Program Files\eutectics\SiemensSoftphone-IPP200 " as the file
path.
Page 1
06/17/2010
Advertisement
Related Manuals for Siemens OC130S
Summary of Contents for Siemens OC130S
- Page 1 Windows XP, Vista or 7 users and anyone who has the latest Windows Updates will not have to do this step.) Step 1: Install the Siemens OC130S Softphone. You may need your Network Administrator to assist you in getting this done. Step 2: Download and install Eutectics Siemens integration software.
- Page 2 Step 4: Configure the Siemens OC130S software to use the IPP Phone. 1. Open the Settings Panel for the OC130 and click on the ManagerModules tab. 2. Change the Accept Audio Connection to use the F10 key and the Disconnect Audio Connection to use the F11 key.
- Page 3 4. Audio Setup – make sure you choose the IPP device as shown below. 5. Set the Voice Channel of the Default Device to the Eutectics device id (IPP400 or any of the IPP Internet Power Phone devices). On Windows 2000, ME or 98 this will be USB Audio rather than a specific device name.
- Page 4 Page 4 06/17/2010...
- Page 5 The Dialog must be open (docked or undocked) for the functions to be directly accessed from the IPP520 keys. The Eutectics device is now configured to be used with the OC130S softphone from Siemens. Please consult your local administrator for any additional site specific settings.
- Page 6 Using the Siemens OC130S with the Eutectics IPP phone is very simple. To place a call, just lift up the handset. You will automatically cause the OC130S to pop up and you will get a dialtone. To dial you can use either the keypad on the phone or the keyboard of the PC.
- Page 7 In the Audio tab - choose the SOUNDCARD device as the PLAYBACK (so your normal PC sounds will come from the Speakers of the PC) Also check the Use Only Default Devices box in the lower left corner. Page 7 06/17/2010...
- Page 8 In the Voice tab choose the Eutectics Device (IPP200 in the above example) as the Playback and Recording - also click on the Volume Button and adjust the master volume to the highest level (you can make it lower later if desired). The Sound Levels adjustment is complete –...
- Page 9 Vista or Windows 7 Users Windows Vista has some additional settings required for proper operation of the Eutectics Devices. The microphone device must be configured as default STEREO capture mode. Using the dialog below – please select the Default Format as 2 channel, 16 bit in shared mode.
- Page 10 Windows 7 Microphone Properties: Page 10 06/17/2010...
- Page 11 Also the Setting of the IPP device as the Default Communications device should be verified as shown below: Page 11 06/17/2010...