Pioneer DRM-7000 Bulletin

4 readers/1 recorder configuration

Hide thumbs Also See for DRM-7000:

Download this manual

RODUCT

NFORMATION

DRM-7000 – 4 Readers/1 Recorder Configuration

This document provides a recommended configuration when using four ROM drives (readers) and a single writer

drive (recorder) for the Pioneer DRM-7000 FlexLibrary. Please refer to the manuals shipped with the unit for more

information.

Installation Check List

The following components are required for this configuration:

• (4) DVD-D7563 or DVD-D7362/7361 DVD/CD-ROM internal read drives

• (1) DVD-R7322 or DVD-R7211 Internal DVD-Recordable drive

• (1) DRM-SN711 Single drive rear panel SCSI connector

• (1) DRM-SC721 2-drive internal SCSI cable extension

• (1) DDG1006 SCSI Loop cable (shipped with DRM-7000)

Recommended Drive Arrangement

Pioneer recommends the following drive arrangement however alternative configurations are available if additional

components are required. For best results, use a separate SCSI channel for the recordable drive.

Additional Information

For further assistance with this library system, please refer to the Pioneer website:

www.pioneerelectronics.com.

Pioneer Electronics (USA) Inc., Engineering Support

ULLETIN

Bulletin # 260803

Page 1 of 1

(800) 421-1613