Substitute Memory Reception
If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically
starts receiving documents into its image data memory. Stored documents are printed automatically after
replacing the recording paper or the toner cartridge. (See Note 1 and 2)
1
When the machine finishes the memory reception and
there is no recording paper or toner, an Information Code
appears on the display.
2
Install the recording paper (see page 17) or replace the
toner cartridge (see page 15).
The machine will automatically start printing the document
stored in the memory.
Print Collation Mode
The printing mechanism of the UF-4100 is a Reverse Order Stacking construction. The UF-4100 has a Print
Collation Mode that stacks received documents in the correct order. When the Print Collation Mode is
enabled, all received documents are stored into memory first, then printed out in Correct Order Stacking.
The requirements for the Print Collation Mode to be active are; 1) Fax Parameter No. 65 PRINT
COLLATION set to "Valid", and 2) enough remaining memory.
The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements
is not met.
Sending Document Order
1
2
3
1 If the memory overflows, the machine will stop receiving and release the communication line.
NOTE
The document(s) stored in the memory up to that moment will be printed out.
2 If you wish to turn off the substitute reception function, change the setting of Fax Parameter
No. 22 to "Invalid". (See page 34)
Receiving Documents
Stacking Document Order
Correct Order Stacking
(Collation Mode)
1
2
3
NO REC.PAPER 010
OUT OF TONER 041
* PRINTING *
Reverse Order Stacking
(Non-Collation Mode)
3
2
1
65