Table of Contents
Advertisement
Misfeed in the large capacity tray
When a misfeed occurs in the large capacity tray, remove the misfed paper, following the procedure below.
While holding the tray release lever,
1
carefully slide the large capacity tray away
from the main unit until it stops.
Release lever
Remove any misfed paper from the main
2
unit and the large capacity tray.
Upper right
side cover
Open the top cover.
3
4
Remove the misfed paper.
If the misfed paper is
stuck inside the machine
and cannot be removed,
open the side cover and
then remove the misfed
paper. (See "Misfeed in
the
transport
area,
fusing area, and exit
area" on page 2-20.)
Be sure not to tear the
misfed
paper
during
removal.
After
removing
the
misfed paper, close the
top cover.
Push the large capacity tray towards the
5
main unit and latch it into place.
If misfed paper is not found in step 2, pull
6
the tray out.
Remove the misfed paper.
7
8
Gently push the tray back into place.
LARGE CAPACITY TRAY
Gently push the large
capacity tray back in
until it stops.
The paper feed table
automatically rises to the
paper
feed
position.
Make
sure
that
the
paper misfeed screen is
cleared and the normal
message
screen
appears.
3-17
3
Advertisement
Chapters
Table of Contents
Troubleshooting
