Manager Mode; Entering The Manager Mode; Override Entries - Sharp ER-A770 Instruction Manual
Pos terminal
Hide thumbs
Also See for ER-A770:
- Instruction manual (211 pages) ,
- Manual (94 pages) ,
- Dealer knowledge book (29 pages)
Table of Contents
Advertisement
9
Manager Mode
The manager mode is used when managerial decisions must be made concerning POS terminal
entries, for example, for overriding limitations and for other various non-programming managerial
tasks.
NOTE
Normal POS terminal operations may also be performed in this mode.
Entering the Manager Mode
To enter the manager mode, select the REG mode from the mode selection menu, then use the following
procedure:
Procedure
The display shown
at right will appear.
XX
Manager code
The manager code is stored in the manager file in advance.
If the code entered is not found in this file, an error occurs.
If the code is correct, it is printed on the journal and the
POS terminal enters the manager mode.
Override Entries
Programmed limits (such as maximum amounts) for functions can be overridden by placing the POS
terminal in the manager mode.
Example
This example presumes that the POS terminal has been programmed not to allow coupon entries over 2.00.
Key operation
REG-mode entries
To enter the
manager mode
Return to the REG
mode.
94
When "0" is programmed
for the secret code
XXXX
µ
Secret code
2
{
@
250
Error
• • • • • •
L
µ
{
1
e
1245
@
250
c
Display
e
Display
MGR MODE
Advertisement
Table of Contents
