Table of Contents
Advertisement
4. Tighten the locknut.
PERIODIC MAINTENANCE AND ADJUSTMENT
Adjusting the rear brake light
switch
1
2
(a)
(b)
1. Rear brake light switch
2. Rear brake light switch adjusting nut
The rear brake light, which is activated
by the brake pedal, should come on just
before braking takes effect. If neces-
sary, adjust the rear brake light switch
as follows.
Turn the rear brake light switch adjust-
ing nut while holding the rear brake light
switch in place. To make the brake light
come on earlier, turn the adjusting nut
in direction (a). To make the brake light
come on later, turn the adjusting nut in
direction (b).
7-24
EAU22272
Checking the front and rear
brake pads
The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
Front brake pads
1. Brake pad wear indicator groove
The front brake calipers are equipped
with two sets of brake pads.
Each front brake pad is provided with
one or two wear indicator grooves,
which allow you to check the brake pad
wear without having to disassemble the
brake. To check the brake pad wear,
check the wear indicator grooves. If a
brake pad has worn to the point that a
EAU22390
EAU43062
1
1
7
- Quick Links:
- Identification Numbers
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
