hit counter script
Epson PP-100 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. Disc Producer PP-100
  6. User manual

Epson PP-100 User Manual

Epson user's guide
Hide thumbs Also See for PP-100:
Table of Contents

Advertisement

Quick Links

See also: User Manual
User's Guide
4113114-01

Advertisement

Table of Contents
loading

Related Manuals for Epson PP-100

Summary of Contents for Epson PP-100

  • Page 1 User’s Guide 4113114-01...

  • Page 2: Copyright And Trademarks

    Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.)

  • Page 3: Table Of Contents

    Starting EPSON Total Disc Maker ........
  • Page 4 EPSON Total Disc Monitor ........
  • Page 5 Using EPSON Total Disc Monitor ........
  • Page 6 Discs ............. . . 90 System Requirements .

  • Page 7: Important Notice And Safety Instructions

    You may use the software to operate the EPSON PP-100. You may use the EPSON PP-100 to copy materials onto disc, including but not limited to CDs and DVDs. You agree to respect the rights of copyright owners. EPSON shall have no liability for, and you shall hold EPSON harmless from, any copyright infringement by you or your employees, representatives, or agents.

  • Page 8: Choosing A Place For The Product

    ❏ If you use an extension cord with the product, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure that the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

  • Page 9: Using The Product

    ❏ Leave enough room around the product to allow for sufficient ventilation. ❏ Place the product near a wall outlet where the plug can be easily unplugged. Using the product Observe the following when using the product: ❏ Do not insert objects in the product. ❏...

  • Page 10: Notice For Cd/Dvd Discs

    -Malfunction or repair -Damage due to natural disaster Epson does not hold any responsibility for lost or damaged data, due to the cause not limited to the above listed, even the product is under warranty period. Important Notice and Safety Instructions...

  • Page 11: Concerning Incidental Loss Arising Out Of This Product

    Concerning incidental loss arising out of this product Should the expected results from this product, including bundled software, not be obtained, we cannot compensate for incidental loss arising from that fact, such as expenses required for use of this product and lost earnings that would have been gained through the use of this product.
  • Page 12 The connection of a non-shielded interface cable to this product will invalidate the EMC standards of this device. You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your authority to operate the equipment. FCC Compliance Statement For American Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 13: Chapter 1 Using Your Software

    Chapter 1 Using Your Software Adding the product Use the EPSON Total Disc Setup to add the product (CD/DVD publisher) to the computer. 1. Select Start - All Programs (or Programs) - EPSON Total Disc Maker - EPSON Total Disc Setup.

  • Page 14: Epson Total Disc Setup

    EPSON Total Disc Setup EPSON Total Disc Setup is a utility to register the product to the computer. Using EPSON Total Disc Maker Use EPSON Total Disc Maker to do the following: ❏ Writing data to DVDs, data to CDs, music to CDs, music and data to CDs, or video to CDs, or copying CD/DVDs.

  • Page 15: Uninstalling Epson Total Disc Maker

    2. Select the printer, then click Printing Preferences in the File menu. Getting information through online help You can access online help for items in the printer driver from your application or the Windows Start menu. & See “Accessing the printer driver” on page 14.
  • Page 16 Windows 2000: Click Start, point to Settings, and then select Control Panel. 2. Double-click the Add or Remove Programs icon. 3. Choose the software you want to uninstall from the list of programs. 4. Click Change/Remove. 5. When the confirmation message appears, click Yes. 6.

  • Page 17: Chapter 2 Publishing Discs

    Chapter 2 Publishing Discs Introduction This section guides you through the procedures for creating and printing CDs/DVDs. Note: For information on CDs/DVDs, see the following section. & See “Discs” on page 90. Turning power on/off This section describes how to turn on/off power. Turning power on 1.

  • Page 18: Overview Of Publishing Mode

    Overview of publishing mode To write data to CDs/DVDs and to print labels that you created/edited are called “Publish” in EPSON Total Disc Maker. The product has three kinds of publishing modes. Standard Mode This mode uses Stacker 1 as the input source, and Stacker 2 or 4 as the output source.

  • Page 19: Drive Settings

    Number of write retries is a setting to retry writing if a write error occurs. Setting the Number of write retries will enable the job to continue without pausing if a write error occurrs. Printer settings Printer name Select Printer Name Publishing Discs...

  • Page 20: Notice For Cd/Dvd Writing And Printing

    Show error mark on discs that experience errors If you check this check box, an error mark will be printed on any disc with a write error. This is useful to identify the disc which encountered the write error. The disc with the write error will be ejected to different stackers depending on the print mode.
  • Page 21 ❏ Ink may not bond if printed outside the receptor. ❏ Turning the product on or off while a disc is in the printer tray may cause a malfunction. Make sure the disc is removed before turning the product on or off.

  • Page 22: Printing On Cds/Dvds With A Commercially Available Software Package

    ❏ Do not touch both surfaces when holding a disc. ❏ Created discs may not be readable in some players. ❏ The completed job display of EPSON Total Disc Monitor shows the number of successes, number of failures, and number of discs printed.
  • Page 23 Note: ❏ Do not open disc cover while running a job (busy indicator is flashing), unless the application instructs to add or remove discs. This may affect write quality or print quality. Also, for safety reason, do not put your hands inside the product while beeping as arm is still moving. ❏...
  • Page 24 4. Load CDs/DVDs into Stacker 1 with the printable side facing up. Caution: Do not load the discs above the red line marked on the stacker; otherwise, the discs or product may be damaged. 5. Insert Stacker 1. Publishing Discs...

  • Page 25: Making Disc Settings And Creating Labels

    ❏ If you use Stacker 4 for output, do not install Stacker 3. Making disc settings and creating labels After loading discs into the stacker, access EPSON Total Disc Maker to make settings for writing discs, and create the labels printed on the discs.

  • Page 26: Publishing Discs

    ❏ Be sure to let CDs and DVDs to dry completely before using them or touching the printed surface. Allow Epson specified discs to dry for at least 1 hour and other types of discs for at least 24 hours.
  • Page 27 3. Select Standard Mode for Publish Mode. Publishing Discs...
  • Page 28 4. Select the type of discs that you loaded into the stacker. 5. Click OK. Publishing Discs 1. Make the publish settings on the Publish screen of EPSON Total Disc Maker. For details, see Help for EPSON Total Disc Maker. Note: To access Help for EPSON Total Disc Maker, select Help from the Help menu.
  • Page 29 2. Click the Publish button. Caution: ❏ Do not open the disc cover while the product is publishing discs, unless the application instructs to add or remove discs. This may affect write quality or print quality. Also, do not put your hands inside the product while beeping as arm is still moving. ❏...

  • Page 30: External Output Mode

    External Output Mode Loading CDs/DVDs Follow the steps below to load CDs/DVDs. 1. Open the disc cover. 2. Take out Stacker 1. 3. Fan a stack of discs to prevent them from sticking together. Be careful not to scratch the recording side of the disc.
  • Page 31 4. Load CDs/DVDs into Stacker 1 with the printable side facing up. Caution: Do not load the discs above the red line marked on the stacker; otherwise, the discs or product may be damaged. 5. Insert Stacker 1. Publishing Discs...
  • Page 32 6. Take out Stacker 2. 7. Fan a stack of discs to prevent them from sticking together. Be careful not to scratch the recording side of the disc. 8. Load CDs/DVDs into Stacker 2 with the printable side facing up. Caution: Do not load the discs above the red line marked on the stacker;...
  • Page 33 9. Insert Stacker 2. 10. Close the disc cover. Caution: ❏ Do not yank Stacker 4 when pulling it out to remove published discs. ❏ Do not remove Stacker 4 when the Stacker 4 LED is flashing fast. Discs may be damaged.

  • Page 34: Making The Stacker Settings

    Making the stacker settings 1. Make sure the product is turned on, and the product and computer are properly connected. 2. Click the Properties icon on the Publish screen of EPSON Total Disc Setup. Publishing Discs...
  • Page 35 3. Select External Output Mode for Publish Mode. Publishing Discs...
  • Page 36 4. Select the type of discs that you loaded into Stacker 1. Publishing Discs...

  • Page 37: Making Disc Settings And Creating Labels

    5. Select the type of discs that you loaded into Stacker 2. 6. Click OK. Making disc settings and creating labels After loading discs into the stackers, access EPSON Total Disc Maker to make settings for writing discs, and create the labels printed on the discs. Accessing EPSON Total Disc Maker Click Start, point to All Programs (Windows XP) or Programs (Windows 2000), point to EPSON Total Disc Maker, and then click EPSON Total Disc Maker.

  • Page 38: Publishing Discs

    ❏ Be sure to let CDs and DVDs to dry completely before using them or touching the printed surface. Allow Epson specified discs to dry for at least 1 hour and other types of discs for at least 24 hours.
  • Page 39 2. Click the Publish button. Caution: ❏ Do not open the disc cover while the product is publishing discs, unless the application instructs to add or remove discs. This may affect write quality or print quality. Also, for safety reason, do not put your hands inside the product while beeping as arm is still moving.

  • Page 40: Batch Mode

    Batch Mode Loading CDs/DVDs Follow the steps below to load CDs/DVDs. 1. Open the disc cover. 2. Take out Stacker 1. 3. Fan a stack of discs to prevent them from sticking together. Be careful not to scratch the recording side of the disc. New :Only for model with this feature Publishing Discs...
  • Page 41 4. Load CDs/DVDs into Stacker 1 with the printable side facing up. Caution: Do not load the discs above the red line marked on the stacker; otherwise, the discs or product may be damaged. 5. Insert Stacker 1. Publishing Discs...
  • Page 42 6. Take out Stacker 2. 7. Fan a stack of discs to prevent them from sticking together. Be careful not to scratch the recording side of the disc. 8. Load CDs/DVDs into Stacker 2 with the printable side facing up. Caution: Do not load the discs above the red line marked on the stacker;...
  • Page 43 9. Insert Stacker 2. 10. Insert Stacker 3. Caution: ❏ Make sure that there are no discs in Stacker 4 when using Stacker 3. ❏ When using Stacker 3, do not pull out Stacker 4. Be sure to lock the lock lever located on Stacker 4 when you use Stacker 3.

  • Page 44: Making Disc Settings And Creating Labels

    ❏ Be sure to let CDs and DVDs to dry completely before using them or touching the printed surface. Allow Epson specified discs to dry for at least 1 hour and other types of discs for at least 24 hours.
  • Page 45 Making the stacker settings 1. Make sure that the product is turned on, and the product and computer are properly connected. 2. Click the Properties icon on the Publish screen of EPSON Total Disc Maker or EPSON Total Disc Setup. Publishing Discs...
  • Page 46 3. Select Batch Mode for Publish Mode. Publishing Discs...
  • Page 47 4. Select the type of discs that you loaded into the stacker. 5. Click OK. Publishing Discs...
  • Page 48 Publishing Discs 1. Make the publish settings on the Publish screen of EPSON Total Disc Maker. For details, see Help for EPSON Total Disc Maker. Note: To access Help for EPSON Total Disc Maker, select Help from the Help menu.

  • Page 49: Taking Out Discs

    Taking Out Discs Follow the steps below to take out the published discs from the stackers. 1. Open the disc cover, and take out the stacker. 2. Take out the published discs from the stacker. The output stacker differs according to the publishing mode.

  • Page 50: Canceling Publishing

    If you need to cancel publishing, follow the instructions below. 2007/04/23 10:15:54070402 unlocked and changed When you start publishing, the screen of EPSON Total Disc Monitor appears on your computer screen. Select the job you want to cancel in the Unfinished Job list, and then select Cancel Job from the Job menu.

  • Page 51: Chapter 3 Replacing Ink Cartridges

    ❏ Epson cannot guarantee the quality or reliability of non-genuine ink. If non-genuine ink cartridges are installed, the ink cartridge status may not be displayed. ❏ When an ink cartridge is running low, the status is displayed on the EPSON Total Disc Monitor. To check the ink cartridge status, do the following: ❏...

  • Page 52: Precautions On Ink Cartridge Replacement

    Ink cartridges with low ink status may not be used when reinserted. ❏ Do not refill the ink cartridges. Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic product behavior.

  • Page 53: Replacing An Ink Cartridge

    ❏ Do not turn off the product or open ink cartridge cover while loading ink (power light is flashing). Opening of covers may cause the ink to re-load, resulting in more of the ink being consumed. Replacing an Ink Cartridge Note: Do not open the ink cartridge package until you are ready to install it in the product.
  • Page 54 If an ink cartridge is low, you may continue to use it until it is expended. To confirm the status of each ink cartridge, see the following section: & See “Using EPSON Total Disc Monitor” on page 73. 4. Carefully pull the expended cartridge straight out of the slot. Dispose of it properly.
  • Page 55 ❏ Do not refill the ink cartridge. Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic product behavior.
  • Page 56 7. When you are finished replacing cartridges, close the ink cartridge cover. Replacing Ink Cartridges...

  • Page 57: Chapter 4 Maintaining Your Product

    2. Make sure that no lights are indicating errors, and that the disc cover is closed. 3. Access the printer driver. See “Accessing the printer driver” on page 14. 4. Click the Utility tab, then click the Nozzle Check button.

  • Page 58: Cleaning The Print Head

    You can clean the print head from your computer using the Head Cleaning utility in the printer driver or from the product by using the buttons. Note: ❏ Clean the print head only if print quality declines; for example, if the printout is blurry or the color is incorrect or missing.

  • Page 59: Using The Head Cleaning Utility

    2. Make sure that no lights are indicating errors, and that the disc cover is closed. 3. Access the printer driver. See “Accessing the printer driver” on page 14. 4. Click the Utility tab, then click the Head Cleaning button.

  • Page 60: Using The Product Buttons

    Aligning the Print Head If you notice a misalignment of vertical lines or horizontal banding, you may be able to solve this problem by using the Print Head Alignment utility in your printer driver. Using the Print Head Alignment utility Follow the steps below to align the print head using the Print Head Alignment utility.

  • Page 61: Correcting The Printing Position

    Correcting the Printing Position If you notice a misalignment of vertical printing position, you may be able to solve this problem by using the Correcting the Printing Position utility in your printer driver. Using the Correcting the Printing Position utility Follow the steps below to adjust the vertical and horizontal printing position using the Correcting the Printing Position utility.

  • Page 62: Cleaning The Interior Of The Product

    Caution: ❏ Never use alcohol or thinner to clean the product. These chemicals can damage the product. ❏ Take care to prevent water from getting inside the product. If moisture, dirt, or other matter gets inside of the product, besides affecting print quality, it may cause the electric circuits to short.

  • Page 63: Cleaning The Filter

    4. Place the stacker back in the position. Caution: ❏ Be careful to keep water away from the electronic components. ❏ Do not spray the inside of the product with lubricants. ❏ Unsuitable oils can damage the mechanism. Contact your dealer or a qualified service person if lubrication is needed.

  • Page 64: Transporting Your Product

    5. Place the filters back in position. 6. Tighten the screws to close the filter covers. Transporting Your Product If you need to transport your product some distance, carefully prepare and repack it. Be sure to use the original box and packing materials. Warning: The product is heavy, so have two people lift the product.
  • Page 65 6. Attach the protective materials to both sides of the product. 7. Repack the product and accessories in the original box. Note: ❏ Keep the product level during transport. ❏ Be sure to remove the protective materials and tape from the product before using it again. ❏...

  • Page 66: Chapter 5 Troubleshooting

    The information that you need to diagnose and solve most common problems is provided by Help, the control panel, and the EPSON Total Disc Monitor utility. Refer to the appropriate section below.
  • Page 67 If the same error occurs fre- quently, contact your dealer. Multiple feed error Remove all discs from the drive and printer tray to avoid causing any damage to the product. Also, check that the discs are loosely arranged in the stacker.
  • Page 68 Lights Power Busy Error Conditions/Remedies Stacker Disc transfer error Turn off the product and remove the disc. If the same error occurs frequently, contact your dealer. Arm failed to release disc Turn off the product and remove disc. Do not remove disc from the arm by hand if arm is picking up the disc.
  • Page 69 Error associated with stacker Lights Power Busy Error Conditions/Remedies Stacker Stacker 3 is inserted for Standard Mode or External Output Mode Remove Stacker 3. Stacker 1 is not correctly inserted Make sure that Stacker 1 is correctly inserted. Stacker 2 is not correctly inserted Make sure that Stacker 2 is correctly inserted.
  • Page 70 Error associated with ink Lights Conditions/Remedies Power Busy Error Stacker Ink low Obtain a replacement ink cartridge. To determine which cartridge is nearly expended, check the ink cartridge status. See “Checking the Ink Cartridge Status” on page 51. Incorrectly installed ink cartridge Reinsert the ink cartridge.
  • Page 71 Busy Error Conditions/Remedies Stacker Ink pad full Please have an authorized Epson service center service the ink pad right away. The pad is full and the unit can no longer function. Do not attempt to service the unit yourself. Note: If ink pad is nearly full, an "Ink Pad Nearly...
  • Page 72 Disc may have a problem. Replace the disc and resume job. If there is a problem with the drive, change the drive with EPSON Total Disc Setup and resume the job. If the same error occurs frequently, contact your dealer.

  • Page 73: Epson Total Disc Monitor

    Error EPSON Total Disc Monitor If a problem occurs while printing, an error message will appear in the EPSON Total Disc Monitor window. If an error message appears indicating the parts inside the product are near the end of their service life or the waste ink pad in the product is saturated.

  • Page 74: Print Quality Problems

    When you access EPSON Total Disc Monitor, the following window appears: EPSON Total Disc Monitor provides the following information: ❏ Job list: You can check a list of jobs (up to 1000 for Unfinished Job and 50 for Finished Job) and its information, and also you can cancel, pause, and restart unfinished jobs.

  • Page 75: Horizontal Banding

    Good sample “Horizontal banding” on page 75 “Horizontal banding” on page 75 “Incorrect or missing colors” on page 76 Horizontal banding ❏ Make sure the printable side of the disc is face up in the Stacker. ❏ Run the Head Cleaning utility to clear any clogged ink nozzles. &...

  • Page 76: Vertical Misalignment

    ❏ Check the H ink light. If the light is flashing, replace the appropriate ink cartridge. & See “Replacing an Ink Cartridge” on page 53. ❏ Make sure the label type selected in the printer driver is appropriate for the type of disc loaded in the product.

  • Page 77: Blurry Or Smeared Printout

    ❏ Make sure your disc is not damaged, dirty, or too old. ❏ Make sure your disc is dry and the printable side is facing up. ❏ Make sure the label type selected in the printer driver is appropriate for the type of disc loaded in the product.

  • Page 78: Incorrect Margins

    & See “Uninstalling EPSON Total Disc Maker” on page 15. Printing is too slow ❏ Make sure the label type selected in the printer driver is appropriate for the type of disc loaded in the product. & See “Publishing Discs” on page 17.

  • Page 79: Ink Adheres To The Recording Surface

    After you restart, the product will print at normal speed. ❏ Uninstall the printer driver, then reinstall it. & See “Uninstalling EPSON Total Disc Maker” on page 15. Ink adheres to the recording surface ❏ Depending on the type of disc, ink may adhere to the recording surfaces if they are stacked right after printing.

  • Page 80: Multiple Discs Feed

    If the same error continues to occur, replace discs. Disc jams If a disc is left in the drive or printer tray, it will be ejected when you turn off/on the product. If you cannot remove the disc by restarting the product, follow the procedures below: ❏...

  • Page 81: Writing Problem

    ❏ The product is used within acceptable environmental conditions. ❏ The product is not subject to vibration or shock. ❏ The fan filter is not clogged with dust. ❏ The printer tray is not dirty. The Product Does Not Functiont All lights are off ❏...

  • Page 82: Lights Came On And Then Went Out

    ❏ Uninstall the printer driver, then reinstall it. & See “Uninstalling EPSON Total Disc Maker” on page 15. The ink light is flashing or is on after you replace the cartridge Make sure the ink cartridge is correctly installed.

  • Page 83: Ink Pad Nearly Full Message Is Displayed By The Software

    Ink Pad Nearly Full message is displayed by the software Ink pad is nearly full. Please have an authorized Epson service center replace the ink pad right away. The pad is nearly full, and the unit will stop functioning when the pad becomes full.

  • Page 84: Appendix A Where To Get Help

    Contacting Customer Support Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product documentation, contact customer support services for assistance. If customer support for your area is not listed below, contact the dealer where you purchased your product.

  • Page 85: Help For Users In The Europe (Emea)

    Contacts for information, support, and services are: Web site URL: http://www.discproducer.epson-europe.com If you need the latest drivers, FAQs, manuals, or other downloadable, access the site at: http://download.epson-discproducer.com Or contact your local distributor or Epson sales company. Where To Get Help...

  • Page 86: Appendix B Product Information

    Appendix B Product Information Product Parts and Control Panel Functions Product Parts Ink cartridge cover: Secures the ink cartridges. Open only when installing or replacing ink cartridges. Control Panel: Use the button and monitor the lights to control your product. See the next section for details.
  • Page 87 Air Vent: Leave at least 10 cm (3.94") between the back of the product and the wall for ventilation. Disc remover cover: Open this cover only when a disc is stuck in the printer tray. Caution: Before opening the disc remover cover, be sure to unplug the power cable from the wall outlet.

  • Page 88: Control Panel

    Stacker 3: Use Stacker 3 as a disc output stacker. Holds up to 50 discs. Stacker 4: Use Stacker 4 as a disc output stacker. Holds up to 5 discs. q. Printer: Prints on label surface of discs. Drive 2: Writes data on the recording surface of discs.

  • Page 89: Ink And Disc

    Light Cyan Light Magenta Magenta Yellow Black To purchase a PP-100 Series exclusive ink cartridge, check with the dealer where you purchased your PP-100 or access either of the following urls: http://www.discproducer.epson-europe.com (Europe) http://www.discproducer.epson.com (United States and Canada) Part numbers...

  • Page 90: Discs

    Discs Epson offers the specified CD-R and DVD-R discs for all your printing needs. System Requirements For using the product Windows requirements To use this product, you must have any of the following Windows operating systems installed. Operating system Memory...

  • Page 91: Technical Specifications

    ❏ Since the quality of any particular brand or type of disc may be changed by the manufacturer at any time, Epson cannot attest to the quality of any brand or type of disc. Always test samples of disc stock before purchasing large quantities or printing large jobs.
  • Page 92 Printable area Printable area is the area for the label printing. The printable area can be set from Set Inner/Outer Diameter screen of the EPSON Total Disc Maker. In the Set Inner/Outer Diameter screen, you can select Standard, Wide, or set manually.

  • Page 93: Ink Cartridges

    Printing on sections outside the printable area may damage your CD/DVD drive. ❏ The EPSON Total Disc Maker can set between inner diameter of 18 mm to outer diameter of 119.4 mm (0.71 to 4.70"). However, printing outside printable area (45 to 116 mm) may result in sticking.

  • Page 94: Mechanical

    ❏ Use the ink cartridge before the expiration date printed on its package. ❏ Do not refill the ink cartridge. Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic behavior.

  • Page 95: Environmental

    Power Printing consumption Standby mode Note: Check the label on the back of the product for its voltage. Environmental Temperature Humidity *1 Without condensation Standards and approvals Safety Low voltage directive 2006/95/EC EMC directive 2004/108/EC Interface Hi-Speed USB (Device Class for computers) Hi-Speed USB (for PictBridge or USB DIRECT-PRINT compliant devices) 41 W 24 W...

  • Page 96: Lifetime

    Lifetime Epson estimates lifetime for components of this product to be as follows: Expected Lifetime: Ink pad life: About 30,000 discs printed Burner life: About 16,000 to 40,000 discs burned The product's ink pad is expected to become saturated and need replacing after printing about 30,000 discs.
  • Page 97 Control panel Correcting the printing position Disc cover Driver accessing for Windows uninstalling printable area printing EPSON Total Disc Maker EPSON Total Disc Maker description Error indicators Head cleaning Windows Horizontal banding Incorrect characters Ink cartridge cover Ink cartridges part numbers...
  • Page 98 Print quality, improving Print speed, increasing Problems banding blurry prints diagnosing incorrect characters incorrect colors margins paper feeding paper jams printer does not print print speed smeared prints Product buttons checking status cleaning transporting Replacing ink cartridges Safety information Service...

Table of Contents

Save PDF