Table of Contents
Advertisement
XG Series User's Guide
Default
5.1.5.2
ether macfilter move
Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
You can expand the upper limit to use
change resource distribution.
Note 4.
Up to 700 commands can be set for the entire device, including the definitions which
It is assumed that this option has not been set.refer to ACL such as
"ether qos
aclmap",
"vlan
aclmap",
"lan ip
filter",
"lan ip
commands.
Note 5.
When the port type of the Ethernet port is a link aggregation, set it only to the anchor port
where the link aggregation is composed.
It is assumed that this option has not been set.
Change the priority of MAC filter.
XG0224 / XG0448 / XG2600
ether <number> macfilter move <count> <new_count>
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<count>
• Source priority
Set the source priority with a decimal value.
<new_count>
• Destination priority
Set the destination priority with a decimal value.
Range
0 to 511
XG0224 / XG0448
0 to 63
XG2600
Configuration mode (admin class)
Change the priority of MAC filtering for each Ethernet port.
If the current priority is set as <count>, change the priority of this definition to
<new_count>.
When the definition is changed, the priority is renumbered.
N/A due to an edit command.
"resource filter distribution"
macfilter",
"vlan
ip6filter",
dscp",
"lan ip6
filter",
"lan ip6 dscp"
136
Chapter 5 Command Reference
command and
"ether
macfilter",
"vlan qos
aclmap",
"vlan ip6qos
and "serverinfo filter"
Model
Port Information Settings
Advertisement
Table of Contents
