Table of Contents
Advertisement
2.
Tick On in the Status field to enable the function, and click Save.
Click to enable or
disable battery
saving mode. This
function only applies
to notebooks.
Click to enable or disable the timer. When enabled, move
the scroll bar to the desired time. When the system is
idle for more than the time period you set, the system
automatically goes into the Intel
Default time is 10 minutes.
Recovering the partition
This procedure allows you to delete the Intel
recover the partition you made for the Intel Rapid
1.
Run the Command Prompt tool.
2.
Type diskpart and press Enter.
3.
At the diskpart prompt, type
list disk after DISKPART,
and press Enter.
4.
Select the disk (SSD) where the
Intel
Rapid Start Technology
®
is installed for volume recovery,
type select disk x
(x = number), and press Enter.
The value "x" refers to a disk number where you want to delete the store partition.
6-8
Rapid Start mode.
®
Rapid Start Technology from your system, and
®
Start Technology installation.
®
Select and click to enable
or disable the function
Click to save the
Click to cancel the
settings made.
settings made.
Chapter 6: Intel
technologies
®
Hide quick links:
Advertisement
Table of Contents
