Table of Contents
Advertisement
Tick On in the Status field to enable the function, and click Save.
2.
Click to enable or disable
battery saving mode. This
function only applies to
notebooks.
Click to enable or disable the timer. When enabled, move the scroll
bar to the desired time. When the system is idle for more than the time
period you set, the system automatically goes into the Intel
mode. Default time is 10 minutes.
Recovering the partition
This procedure allows you to delete the Intel
recover the partition you made for the Intel Rapid
Run the Command Prompt tool.
1.
Type diskpart and press Enter.
2.
3.
At the diskpart prompt, type
list disk after DISKPART,
and press Enter.
4.
Select the disk (SSD)
where the Intel
Technology is installed for
volume recovery, type select
disk x (x = number), and
press Enter.
The value "x" refers to a disk number where you want to delete the store partition.
4-22
®
Rapid Start
®
Select and click to enable or
disable the function
Click to save the
settings made.
Rapid Start
®
Rapid Start Technology from your system, and
Start Technology installation.
®
Chapter 4: Software support
Click to cancel the
settings made.
- Quick Links:
- Motherboard Layout
- Front I/O Connector
Hide quick links:
Advertisement
Table of Contents
