Page 2
SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ************** DO read the operating instructions before you attempt to use the equipment.
Page 3
IMPORTANT The mains lead on this equipment may be supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the cover omitted.
Page 4
WARNING • The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. • To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains.
Top view 1. CD door 2. Skip Back/Tune - button 3. Skip Forward/Tune + button 4. Play/Pause/Preset + button 5. Stop/Preset - button 6. Program button Rear view Aux In L/R sockets Audio Out L/R sockets FM antenna wire L / R speaker terminals Note: The marking plate is located on the bottom of the unit.
Making the connections Connect external hi-fi units (e.g., MP3 player) to these sockets using standard phono cables (not Grounded included) AC outlet Right Speaker Left Speaker Connect the red speaker wires to the red (+) terminals and the black speaker wires to the black (-) terminals.
Page 9
• Using your micro system Press the Standby button to turn on the unit. To choose the desired source, press the Source button on main unit to cycle through the option or press the CD, Tuner or Aux buttons on the remote control. Turn the volume control or press the Volume +/- button to adjust the volume level.
Using repeat and random playback To repeat tracks or play tracks in random order, press the Mode button to cycle through the options: 1 (repeat current track) -> All (repeat all tracks) -> Intro (play the first 10 seconds of each track) -> Random -> off (normal play).
Storing station presets The radio can store up to 10 preset stations. To store a station: 1. Tune the radio to the desired station. 2. Press the Program button. "Preset" flashes on the display. 3. Press the Preset+/- buttons to select the desired preset number.
Page 12
Setting the Timer You can set up the system to turn on at a chosen time. To set the timer: 1. In standby mode, press and hold the Timer button until the hour starts flashing. 2. Press the buttons to set the hour, then press the Timer button.
Main unit: 145 (W) x 167.5 (H) x 208 (D) mm Speaker box: 135(W) x 167.5 (H) x 147 (D) mm for each Weight: 4Kg We continually strive to improve our products; specifications may change without prior notice. Hitachi Europe Ltd.
Troubleshooting guide Should you experience difficulties in the use of this player please refer to the following chart. Troubleshooting Guide Problem Points to Check • Disc may be inserted upside down • Disc not mounted correctly on spindle • Dirty or defective disc •...